I want to know one information about i phone.i am useing i phone now,so if i will go out of country(right now where i) so without country cord can i use its over there

Hi,Actually i want to know one information about iphone,if i want to go out of country( where i liveing now)so can i use there my i phone,without any country cord.just example.now i use my sim card(where i liveing,thats country mobile sim card) so if i will go abroad country,then i can will use my phone over there without any country cord with thats country mobile sim,or if not then kindly can i get iphone country cord activeted number?
Jubayedsujan
Abu dhabi
UAE

Where did you buy this iPhone? Did the receipt say it was unlocked?
Put in a different sim - if iPhone works, then it is locked. If it does
not work with different sim, then the iPhone is locked to a wireless
carrier. Contact that wireless carrier to see if they offer unlocking
and if you qualify.

Similar Messages

  • I Need To Know Some Information About Installing Windows On A Macbook Pro 13

    Hello !
    Actually Playing My Favourite Games Is A Problem Because I Can't Find DVD Games (Mac Version) For My Macbook Pro So I Found Out That You Can Install Windows 7 Software On A Mac But I Wanted To Know Some Information Like :
    - I Know That I Can Install It Using Boot Camp But I'll Need A Windows 7 DVD So Is There Some Specialized Version For Mac ? Or I Just Need A Normal Windows 7 DVD For PC ?
    - If I Installed Windows 7, Will I Lose The Mac OS X Lion ? Or I Can Have Both Softwares Together At The Same Time ?
    - If I Installed Windows 7, Will It Have The Same Specifications Of Macbook Pro 13 ? (Ex: 2.4 GHz Processor)
    - If I Installed Windows 7 And I Already Had Mac OS X Lion, Will The Macbook Lag Or It Will Work Properly ?
    - If There's Any More Info That You Know About Installing Windows 7 On A Macbook Pro 13, Please Provide Me With It, Thanks!

    This really is a forum about the MacBook Pro hardware.  The best place to ask your questions would be the Windows/BootCamp forum.  Your MacBook Pro 13 has one weakness that's going to make gaming a bad experience.  It has an integrated Intel HD graphics processor, whereas the higher end MacBook Pro's have discrete ATI graphics processors.  But the forum will help you out. 

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • Want to know more details about control breaks in reports

    hello all
    i want to know more details about control breaks AT First,
                                                                          AT Last,
                                                                          AT New,
                                                                          At End of and on change .
    can anybody tell with examples?

    Hi Swamy,
       Check the following.
    Control break statements are used to create statement blocks which process only specific table lines the LOOP – ENDLOOP block.
    You open such a statement block with the control level statement AT and close it with the control level statement ENDAT. The syntax is as follows:
    Table should be sorted when you use control-break statements
    You can break the sequential access of internal tables by using these statements.
    Syntax:
    At first.
    <Statement block>
    Endat.
    This is the first statement to get executed inside the loop (remember control break statements are applicable only inside the loop)
    So in this block you can write or process those statements which you want to get executed when the loop starts.
    At New carrid.
    Write:/ carrid.
    Endat.
    In this case whenever the new carrid is reached, carrid will be written.
    At End of carrid.
    Uline.
    Endat.
    In this case whenever the end of carrid is reached, a line will be drawn.
    At Last.
    Write:/ ‘Last Record is reached’.
    Endat.
    Processing of statements within this block is done when entire processing of entire internal table is over. Usually used to display grand totals.
    You can use either all or one of the above control break statements with in the loop for processing internal table.
    At end of carrid.
    Sum.
    Endat.
    In above case the statement SUM (applicable only within AT-ENDAT) will sum up all the numeric fields in internal table and result is stored in same internal table variable.
    Hope this helps you.
    Any queries, get back to me.
    Regards,
    Chandra Sekhar

  • I need yo know more information about IOS App wrapping?

    I need yo know more information about IOS App wrapping?

    I need more information about this area as I'm new in it, and suppose to handle the technical support for it in the place that I work in

  • Does anyone know the information about "charcoal filter" ?

    Does anyone know the information about "charcoal filter" ?
    Principle , operation, patent number, or any reference paper?

    It's just a combination of edge convolutions with noise textures and contrast threshold operations - like most "art" filters.
    Mylenium

  • HT5577 Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect. What do I do?

    Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect.So I tried to go the email route but i never get anything in my email about recovering my password. What do I do?

    Hey donnieandjamie31,
    It sounds like you are not getting the email to reset your password.  If you have a rescue email setup for your Apple ID, the reset password email will be sent there and not your Apple ID email address:
    When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    You might want to check your other email accounts for the password reset email, including their Spam folders. If you continue to have issues, please contact our Account Security Team:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect my c even if i'm going from a 4 to a 5s?

    i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes.  when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?

    Welcome to the Apple Community.
    Yes you can probably delete the 2 incomplete back ups they are unlikely to work.
    However, I'd be inclined to back up to a computer as well and restore from there, if you are changing your phone.

  • I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone?

    I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone?  There seem to be differeing opinions on this.

    Iphone 4s only has one version so it should work world wide in any carrier..As long as it's and unlocked version ofcourse.

  • I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ?

    Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.

    If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
    If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost. 
    Granted, there is no requirement to have a computer to use an iPhone.

  • HT1222 Hello, I wanted to update my Mac OS 10.5.2 and i am using dial up modam, Once the machine will ask to restart for update modem application also close, please suggest how can i update

    Hello, I wanted to update my Mac OS 10.5.2 and i am using dial up modam, Once the machine will ask to restart for updation modem application also close, please suggest how can i update

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.
    You should now see the App Store icon, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • I have an IPod Touch that is disabled. I can't connect it to ITunes becaus e the computer I synced it with cannot be used. How do I sync it to the computer I have right now?

         I have an IPod Touch that is disabled. I can't connect it to ITunes because the computer I synced it with cannot be used. How do I sync it to the computer I have right now without using the old one?

    polaricee1319 wrote:
         I have an IPod Touch that is disabled. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have it resolved... have a look at this link...
    http://support.apple.com/kb/ht1766

  • Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

    Hi
    Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message. 
    Cannot use file  for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
    Server does not have a dependency on it.
    CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
    Any help please
    kam
    KAMEL

    Hi Saurabh
    Exactly I have SQL SERVER 2012
    Failover Clustering   in windows server 2012 with two nodes with
    two instances and exactly I run them in the same server and each instance with
    three drives Backup, Data and log.   
    KAMEL

  • Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

  • Mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

    mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

    You cannot use a UK carrier sim in Chile unless you are a UK customer and have roaming set up with the UK carrier and the Chinease carriers do not offer unlocking so I doubt the iphone is unlocked

Maybe you are looking for