I want to know the number of gift card that I bought

Hi,
Click Store in the iTunes menu bar then click: View My Account / Purchase History
Carolyn

Similar Messages

Want to know the number of lines executed in my code

Hi,
I want to know the total number of lines of code executed by Flex in my application which includes the code generated while converting mxml to .as .Like for example with help of Trace class.

Hi,
Please go through following links which i am providing :
1) http://www.adobe.com/devnet/flash-builder/articles/ascode-coverage.html
2) http://opensource.adobe.com/wiki/display/flexpmd/FlexPMD
3) http://opensource.adobe.com/wiki/display/flexpmd/FlexMetrics
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

I want answers to securtiy question does not have rescue email and does not want to lose the fifteen dollar gift card i just put on my accout by setting up a new one and does not want to lose all my music how can i fix this

i have forgoten the answers to my security questions and does not have a resuce email and i donot want to loose the $15 giftcard i just put on there or any of my music by setting up a new accout and all i use to download items is giftcards. what should i do?

plarkin wrote:
should I do a full reset of TM (per the instructions at the link below) prior to setting up the TC?
I'd start by just selecting the new destination. Do the "full reset" if you have trouble with that.
do I need to set up the network portion first and then turn on TM?
That might make things easier.
even though my mini was previously only connected wirelessly to the old router, I plan to connect via Ethernet to the TC (for one thing, to make the initial backup run faster). Do I just turn AirPort settings off on the mini, or does that need to be on in order to setup the TC?
To assure that your first backup is over Ethernet I'd turn off AirPort until it's done. Check the order in the Network panel of System Preferences. I'd move the Ethernet connection item to the top of the list.
In other words, does the initial setup of the TC from my mini happen wirelessly or over Ethernet?
Either way should work fine.
I currently have a networked printer conneceted to my old router, which I will connect via Ethernet to the TC. Can I assume that, once I have set up all of my family's PCs/Macs/iDevices on the newly-established TC network, that I will have to re-establish connection to the printer as well?
Not necessarily. I'd only do that if the printer isn't available after the switchover.
I would like to reformat the second external drive (the one previously being used for TM backups) for possible reuse with another computer. Can I simply reconnect this to my mini and reformat?
That's what I'd do.
is TM going to see it and try to back it up?
If you've already reconfigured Time Machine to use the Time Capsule drive, there shouldn't be a problem.

Want to know the number of user logged off

Hi
Using Mii server, how to check how many user where logged off.
Regards
Rizvi

Hi,
You need to write customized java code in your development. Set the session of the user logged in and store. And get these details from the JSP page.
Also in MII logs you can find these details.
http://localhost/Lighthammer/Illuminator?service=SystemInfo&Mode=SessionStats
Using this you have to play around the code.
-Suresh

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.

It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html

TS1292 I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

I have a gift card that i tried using a coin to scrape off. When i was doing it, the whole thing came off. I want to know if you can use the barcode to still get me the money.

roaminggnome was referring to the page that you posted from i.e. http://support.apple.com/kb/TS1292
You've tried contacting iTunes Support as it suggests on that page ? If not then you can contact them via this page and see what they say (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

I want to talk to an actual person anybody know the number?

I want to talk to an actual person anybody know the number?

Here is one for activation problems, etc.
http://www.adobe.com/support/download-install/supportinfo/
Can we help you here in the forum?

I had 10$ gift card that works only on US. I redeemed the gift card but back in the game i get buy stuff and it says "you cant buy in US store you must swich bla bla bla" i dont want ti swich because the 10 $ works only at the US store. Help please.

I had 10$ gift card that works only on US. I redeemed the gift card but back in the game i get buy stuff and it says "you cant buy in US store you must swich bla bla bla" i dont want ti swich because the 10 $ works only at the US store. Help please.

Hello SBentley22,
I can only imagine how upset I would be to discover that over $1000 in gift card funds seemed to be missing. I certain that I would not do well with the additional complications that you've described either. I apologize for you and your boyfriend having to cope with this situation. Certainly this was never our goal.
I was unable to locate the purchases or returns that you mention using the information you provided when you signed up for Best Buy Unboxed. I would very much like to look into this situation for you and do what I can to help, but I will need more information to begin. If you will please send me a private message that includes your full name, telephone number, and the Customer Service PIN from the receipt where the gift card was issued, I'll get started with my research.
Please know that I'm extremely grateful that you took the time to bring your situation to our attention. I look forward to hearing from you.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

How do I know games and programs that become free? I want to know the programs and games that become free first first

How do I know games and programs that become free?
I want to know the programs and games that become free first first

You are allowed to have two activated installations so there should not be a problem having working installations on the two machines. If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Want to know the difference among the sap standard schemas TM00/TM01/TM04

hi, experts
i have read the standard courses HR310 and HR311,but i am still confused about the difference among the three standard TM schemas TM00,TM01 and TM04.
i only learn from the book about it as follows:
TM00: Time evaluation with time events
TM01: Time evaluation for work schedule deviations
TM04: Time evaluation for times entered as hours.
i want to know the details about different forms of time data and different strategies in evaluating the time data in the three standard schemas.
thanks in advance

Hi,
TM01: read the actual data, Automatically calculate the overtime with the help of events.
TM04: Negative time evaluation, Get the data from the Work schedules
TM01: Positive/Negative time evaluation: Read the exception of workschedules, get the data from the time events form the 2011IT.
TM01:
Schema TM01 can be used for time evaluation if you only record
exceptions to the work schedule, and not all times that count as working
time (actual times).
You can use schema TM01 to import and process time data that has been
recorded online.
The schema forms time balances, time wage types, and time quotas, and is
processed using the time evaluation driver, RPTIME00.
The valuation basis for time evaluation forms a planned pair, which is
generated according to the planned specifications in the employee's
personal work schedule.
The planned pairs generally correspond to the time worked. Only
attendances from infotype 2002 and absences from infotype 2001 result in
a difference between planned and actual.
Schema TM01 automatically generates overtime for all attendance times
recorded over and above the planned specifications in the personal work
schedule. If overtime is recorded in infotype 2005, it can be approved
systematically taking account of overtime breaks.
TM00:
Schema TM00 processes time events that have been recorded at a time
recording terminal, or the time pairs formed from the time events in
pair formation. Attendances and absences are also imported.
Schema TM00 is based on positive recording of time data, that is,
recording all times that count as working time (actual times).
Schema TM00 only evaluates time data with clock times (or full-day
records). The main task of schema TM00 is to classify the actual times
by comparing them to the planned specifications in the daily work
schedule (start and end of planned working time, core times, breaks, and
so on).
TM04:
The time worked by the employee is recorded in the Attendances infotype
(2002), and not as clock-in and clock-out times. When processing
clock-in/out times, the emphasis is on the length of time between the
postings and not on the times at which the postings were made.
You can use schema TM04 to process attendances and absences that specify
a number of hours only, rather than concrete start and end times.
The times stipulated in the daily work schedule are not relevant. Only
specifications such as planned hours and minimum daily working time are
evaluated from the daily work schedule.
TM04 caters both for negative time recording (recording of exceptions to
the work schedule) and positive time recording (recording all
attendances or actual times).
If negative recording is used, the planned hours are generated on the
basis of the daily work schedule. Recorded absences and some attendance
times are deducted (see schema TP01.)
The "Time Management status" indicator in the Planned Working Time
infotype (0007) shows whether all actual times are recorded for an
employee, or only exceptions to the planned specifications.
Regards:
Devi.

[ASK] How to know the number of usage of each Atomic Service ??

I correct my question:
*How to know the number of usage of each Atomic Service by the Domain & Enterprise Services?*
I want to see the number of usage of each atomic service(AS) by other services (DS & ES)
ex:
es_A -----> ds_B   (1x)    ----->    as_B    (2x) --> so as_B is accessed by es_A twice (2x)
es_A -----> ds_C   (2x)    ----->    as_C    (2x) --> so as_C is accessed by es_A 4times (4x)
es_A -----> ds_B   (2x)    ----->    as_D    (3x) --> so as_D is accessed by es_A 6times (6x)
es_B -----> ds_B   (1x)   ----->    as_E    (1x) --> so as_E is accessed by es_B once (1x)
es_B -----> ds_C   (3x)    ----->    as_F    (2x) --> so as_F is accessed by es_B 6times (6x)
es_B -----> ds_B   (4x)    ----->    as_G    (1x) --> so as_G is accessed by es_B 4times (4x)
etc..
Is there any tool in OSB, WLS, BPEL Console or Java Developer to support it?
Thank you...

user13294928 wrote:
Ganesh wrote:
Their are two ways to do this
1. In the sbconsole, when you click on the proxy or any resource name, you will see information about number of references and referenced by as two parameters. Click on the number you will drill down into exact schemas, business service, split joins, etc it refers and who all refers this resource.--> Where can I see the information?
2. In the OEPE, eclipse you can see the same in the "Reference" view of the OSB perspective.--> I'm using Java Developer right now, does it work?Thank you1. You can see the reference in: sbconsole -> Resource View -> Click on Proxy or any resource name -> it will show Ref: <n> some number and -> Click on the number. Do you see this?
2. JDeveloper should also have a resource view, but have not tried it though

Know the number of the row in a select

Hi experts,
I´m doing a select * ... such as:
*      SELECT *
*        FROM YPLM00 CLIENT SPECIFIED
*        WHERE mandt = sy-mandt
*        AND TIPOL = 'RS'
*        AND PSPNR = yplm00_tree-pspnr
*        AND TIPOP = yplm00_tree-tipop
*        AND PROCE = yplm00_tree-proce
*        AND ID_ED = yplm00_tree-id_ed
*        AND TIPOE = yplm00_tree-tipoe
*        AND ID_EN = yplm00_tree-id_en.
Can i know the number of the row that is affected? I don´t want the total of rows... i want the number of each one...
Thanks in advance,
regards

>
Victor Capi wrote:
> I have a table with
>
> Q   W   E   R
> E   T    U    I
> A   Q    E    T
> A   W   R    F
Hi Victor,
I see what you mean. The problem is still that there isn't actually a row number associated with each database row. In your example, what is the primary key of the table? If it is say A Q E for row 3 and A W R for row 4 then that is the only way you can identify them.
It sounds like you have performance considerations so probably change the SELECT * to only SELECT the fields you need. Also change it so that you are SELECTing into a table - so in your example you would get both rows 3 and 4. Then if you want to process those rows, you will have to use their primary keys to identify them, say by LOOPing through the internal table you have just selected them into.
Do you already have an internal table with values you wish to read from this table? So say you have a table with 500 entries which all define the value in the first column of this table? If so you could try chaning to using a FOR ALL ENTRIES in your select to get all rows for the table in one hit - you can then process them again in a LOOP.
Hope this helps in some way.
Gareth.

Hola , install products from the page of the app store but want to know the activation key

Hola , install products from the page of the app store but want to know the activation key

Find your serial number quickly

Want to know the function module for Partial Payment F-28 in FI

Hello all
i want to know the Funtion Module for the documents in which Partial payment have been made .
For that i have the customer and invoice number .

Hi,
Use the FM FI_TERMS_OF_PAYMENT_PROPOSE for calculating the Payment due date call function 'FI_TERMS_OF_PAYMENT_PROPOSE'
hope it will help u.
thanks,
Neelima.

What does knowing the number of "views" tell us about a thread.

10 Points to the person who can give a cogent, rational, non-apologetic answer to the questions posed below, which are based on the premiss set forth just before it. (Please feel free, if you see fit, to dispute the premiss).
PREMISS:
People might "look" at a thread for a whole host of reasons -- whether it be to read the thread and contribute, or just to lurk, or because the thread's title was ambiguous, or funny, or in some other way remarkable apart from any substantive value it may have, or, even, just by accident, because the person clicked on the wrong button and inadvertently "looked" at the thread for a nanosecond before exiting. And probably for other reasons as well.....
QUESTION:
In light of the foregoing, what does knowing the number of "views" tell us other than what it says, i.e., does it tell us anything apart from the number of people that have for whatever reason literally just taken a look at the thread?
If the answer to the above question is nothing -- i.e., the number of "views" tells us just that, the number of "views" and nothing more -- then why is this information so prominently featured, instead of, say, the information that used to be present under the old Discussions system, such as the number of unread posts in a particular thread, which is data that actually has a value as something other than a statistic. Knowing the number of unread posts indicates to someone following a particular thread, whether there has been additional contributions to the thread that should be reviewed if one is to remain current on the substance of that particular discussion. The extent of the additional contributions (if any) are readily apparent from the count).
The little, difficult-to-discern-on-my-PowerBook's-screen tiny blue dot can hardly be said to take the place of the unread post count, as it shows the same indicator for one new post as it does for ten or even a hundred.
Thanks for your help with this.

Hi Scott --
Thanks for your thoughtful reply. It did help, and I've even marked it "helpful" under the new, bizarre point system to evidence this fact. (BTW, my "offer" of a point award was more a misplaced attempt at sardonic humor aimed at deriding the new point system, with which I have a number of strong disagreements, than it was an effort to bribe thoughtful replies like yours. Please know that I really do appreciate the time and effort you took to get back to me on this and meant no disrespect by the "reward" point bounty).
That said, I do have one follow up. You write that "the idea behind this [use of "views" rather than number of posts unread] is that even discounting curiosity, boredom, funny title, et al., the number of folks that have looked at a thread should bear some relation to the number of folks who are having that issue."
I just don't think that that's the case. I don't think it sufficently discounts curiosity, boredom, funny title, et al. Those are some pretty powerful motivations for people to peruse this site. And there are many, many others as well.
Of course I can only speak with certainty of my own personal experience with the Discussions, but based on that, I know have "viewed" numerous threads on subject matters that not only wasn't I experiencing, but on subject matters that I couldn't possibly experience,because it concerned Mac hardware or software that I don't own or have never used.
In some cases, I looked at threads where the subject line sounded interesting, or amusing, or provocative, in other cases I looked at threads that concerned hardware or software that I once owned (and so I thought I might be able to help with the problem at issue), in still other cases the thread concerned software and/or hardware that I was considering purchasing (and wanted to know what I might be getting into). With regard to the former of those two reasons, I know there were many, many instances where, based on the title of the post, I knew that I could help and I viewed the post as a form of oversight (so to speak) to make sure that the responses being left were providing accurate and complete information.
In my "view," though clearly not in the "view" of the Mods, et al. for reasons (thanks to your post) that I can at least better articulate (if not understand or agree with), a thread's number of "views" is susceptible to just too many possible meanings to make it of any real use. The number of unread posts (and by this I refer to the old numeric value of posts not yet read and not that illegible little blue dot used in the new system) may not be perfect information, but it is certainly more useful in my "view" than the number of "views." (I apologize for those poor puns on the word "view," but in my "view" they were unavoidable, sort of. See what I mean
Anyway. I really do thank you for your reply and the time and effort you took to make it. But, alas, with each hour I use these New Discussions, the more convinced I become that my continued time on here is fading. With no more hope of leveling up, with even less hope of ever receiving any tangible sign of "thanks for your help" in the form of + votes (insignificant as they were, at least they were something, everyone like to feel appreciated), with the posts much more difficult to read on my PowerBook's screen and even more difficult to keep track of, and for a bunch of other reasons (some admittedly petty, and some that strike at the core of why and how I use this site), I fear that I will soon be saying farewell.
But till then, thanks once again for your thoughtful reply.

I want to know the number of gift card that I bought

Similar Messages

Maybe you are looking for