I want to know the process flow in Bill Of Service (BOS)

please refer to link http://scn.sap.com/message/14200963.

Similar Messages

I have a image in iPhoto in my macbook pro and i want to take that single image in my iPhone 5, i want to know the process??

i have a image in iPhoto in my macbook pro and i want to take that single image in my iPhone 5, i want to know the process??

Hello there, Bhavesh7.
The following Knowledge Base article offers up some great information in regards to how to sync photos to your iOS device:
iTunes: Syncing photos
http://support.apple.com/kb/HT4236
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Want to know the Processed Messages Size in XI server

Hi,
I want to know about the Processed messages size per month at my PI server . Per day theer are more than 50,000 mesages are processing and each message size averagely 10 KB . But I want to Know exactly How much GB it has Exchanged throgh my PI server at last month. For this where can we check this.
I had tryd using teh Performance Monitoring at RWB . but it is giving Interface wise or some average size. But i want the exact cummulative size for day wise and Month wise.
I steher any way to check this at OS level. ?
please help me regardiong this.
regards
Jain

Goto RWB -
> performance monitoring -
> give display as overview aggregated , time interval and aggregation interval as 1 month.
this will give the result u want....dnt give interface name...
Regds,
Pinangshuk.

I just started a Hawaiian Internet Radio Show and wanted to know the process in tapping into the Cd's of the Musical Artists that I play on my Internet Radio Show and would love to be compenstated on the Songs that I play through I Tunes? Please advise

Aloha Please direct opinions on what to do.. Thank You

http://www.apple.com/itunes/affiliates/
I presume you have obtained all necessary performance licenses for playing this music on the Internet, yes?

I want to know the process of transferring Adobe Captivate 4 from one laptop to another laptop.

How do you transfer your current Adobe Captivate 4 from an old lap top to a new laptop.

if you're no longer going to use it on your old computer, uinstall it: deactivate (help>deactivate) it before uninstalling from your old computer.
you're limited to two installations/activations.

How to know the process code of an IDOC

Hi All,
If I want to know the process code of a standard SAP IDOC, how do I do it. Is it we42 or any table/transaction, which can show me all the possible process codes for an IDOC.
I need to know this so that I can use this accordingly in my partner profile. ( I do not have any idoc in mind, but its avery general question. How do I know what process code belongs to which IDOC)
Many thanks

Hi,
U can check using We41 and We42 tcode for both inbound and outbound case. For each process code a function module is attached check the same for required functionality.
WE60 and WE64 transaction.will list the std IDOC in SAP.
chirag

I have pavilion g6 1313 ax. I want to know the full process of partition.

I have a hp pavilion G6 1313AX with OS windows 7 64-bit. i had deleted the recovery partition(D). i want to know the full process of partition of the HDD or if there is any way of doing partition without effecting the current OS. The size of C- is 441 gb nd i wanna to reduce it.

You could use a partition program like partition magic but I would still make sure you have all your important pictures and documents saved to an external device or copied to another machine just in case.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Wants to know the practical steps in Variant Configuration process.

Dear Experts,
I want to know the practical steps being performed under the variant configuration process being followed under textile industry or a pharmaceutical industry. Can anybody please help me out of this issue?

Dear Santosh,
I think you are aware Variant config. is used to configure the material according to the requirement of the customer at the time of processing the sale order.But to my knowledge of pharma business the material will be produced in advance and there will be lot of planning associated to increase the business,and there will be different combinations and strengths available at the disposal,there will not be any make to order scenario.Since it is an ongoing process.It will be like the number of end users of that particular product in the market(here end users will be the patients to whom the medicine has been prescribed).I hope this will be of some help to you.If am wrong pls correct me.
Regards,
Ramesh.

Getting an process-flow audit id in the process flow itself

Hi,
I am using OWB 11gR2 and want to capture the audit_id of the process flow itself at the process-flow level.
I want to use this to pass it tru to the mappings in the process flow.
I know how to get audit_id when you're in the mapping (get_audit_id), but i want the audit_id of the process flow when i am "inside" the process flow.
When i have this i can let all of my mappings in the flow receive the same id.
When i setup a parameter at the process flow and specify get_audit_id there it errors on me.
Does anybody what to specify here ?

ok,
i figured it out myself and answered myself in another thread.
Basically it goes like this:
In the master flow you have sub-processflow objects which you want to pass along the audit_id of the master flow.
So that you can pass along the same audit-id to every mapping in all of the flows.
But it would be nice to be able to run sub flows independently from the master flows (for testing etc.)but still feed the same id(whatever that is) to the mappings in that process flow.
And on the lowest level this applies to mappings as well: be able to run a mapping and get a id to store in a field.
The same applies to feeding a process date to all the mappings in your flows(used for dwh purposes)
How does this work on the mappings ?
Create a mapping input parameter, put 2 params in it.
One date, one number. The date part is easy: just put SYSDATE in it.
The number part would ideally hold get_audit_id as default value. Unfortunately this generates an error.
So put default value of 1 here. Create a constant on the mapping with value get_audit_id in it.
Create expression that tests if input_param has something else than 1 as the value ; if so then there was no audit_id fed into the mapping by a process flow. Make the expression use the constant then. Use the output of the expression in your mapping.
How does this work in process flows ?
You'll have two different parts here:
-feeding from flow to a sub-flow
-feeding from flow to mapping
Flow to subflow:
You can not bind a flowparameter to subprocess paramter so you'll need to create 2 variables.(process date / audit id)
Create two parameters, one date with sysdate as default, one number with 1 as default.
Use assign operator to bind audit_id parameter to the audit id variable.
Use another one to bind to the same variable, but specify parent_audit_id as value instead of binding it to the paramter.
Use conditonal routing on these two assign operators to have one of these be executed.
This will ensure that the variabel either gets parent_audit or the value of the input parameter of the flow.
Use another assign op. to bind the date input to the date variabel.
Bind the parameters of the sub flows to the variables.
Flow to mapping:
Use the same procedure as descibed above. Only difference here is that you can bind a mapping parameter to a parameter.
This means that you'll don't need the assign stuff for the date parameter since you can bind the date parameter of the mapping to the input parameter of the flow.
Hope this helps someone ...

OWB | Passing input to mapping in the process flow

Hi,
I have a process flow which calls a stored procedure which returns 2 values.
I want to use the values returned from this procedure as an input in my mapping. My mapping has Mapping_Input_Parameters definined for these two inputs.
These values are going to be load_date and the batch it belongs.
I have created new params in the process flow edit under the mapping. The process flow executes successfully if I give the input params as a constant. When I do a binding with the out variable of the stored procedure I get a deployment error as "Internal error: OUT_D_LOAD_DATE cannot be converted to a constant value. Please correct the value. If the problem persists then please contact Oracle Support with the stack trace and details on how to reproduce it."
Please let me know how to resolve this and if there is way to get the load_date in the mapping without actually having to call the procedure in the mapping. The load_date will change everyday and I need to read it from a table.
Thanks!

Hi
If you have resolved the error please guide me also Since I am also facing the same error. (RPE-02040: Internal error: MYRAND cannot be converted to a constant value. Please correct the value. )
I am using 10gR2, Here my test process flow is
Start - > MyRand -> FindOddEven->end
Here MyRand function will return a value, the function findOddEven will just do a mod of 2 and return 1 for odd numbers and 0 for even numbers. When I bind the OUT parameter of the MyRand to the IN parameter of the FindOddEven it is throwing the same error.
Thanks in advance

Want to know the difference among the sap standard schemas TM00/TM01/TM04

hi, experts
i have read the standard courses HR310 and HR311,but i am still confused about the difference among the three standard TM schemas TM00,TM01 and TM04.
i only learn from the book about it as follows:
TM00: Time evaluation with time events
TM01: Time evaluation for work schedule deviations
TM04: Time evaluation for times entered as hours.
i want to know the details about different forms of time data and different strategies in evaluating the time data in the three standard schemas.
thanks in advance

Hi,
TM01: read the actual data, Automatically calculate the overtime with the help of events.
TM04: Negative time evaluation, Get the data from the Work schedules
TM01: Positive/Negative time evaluation: Read the exception of workschedules, get the data from the time events form the 2011IT.
TM01:
Schema TM01 can be used for time evaluation if you only record
exceptions to the work schedule, and not all times that count as working
time (actual times).
You can use schema TM01 to import and process time data that has been
recorded online.
The schema forms time balances, time wage types, and time quotas, and is
processed using the time evaluation driver, RPTIME00.
The valuation basis for time evaluation forms a planned pair, which is
generated according to the planned specifications in the employee's
personal work schedule.
The planned pairs generally correspond to the time worked. Only
attendances from infotype 2002 and absences from infotype 2001 result in
a difference between planned and actual.
Schema TM01 automatically generates overtime for all attendance times
recorded over and above the planned specifications in the personal work
schedule. If overtime is recorded in infotype 2005, it can be approved
systematically taking account of overtime breaks.
TM00:
Schema TM00 processes time events that have been recorded at a time
recording terminal, or the time pairs formed from the time events in
pair formation. Attendances and absences are also imported.
Schema TM00 is based on positive recording of time data, that is,
recording all times that count as working time (actual times).
Schema TM00 only evaluates time data with clock times (or full-day
records). The main task of schema TM00 is to classify the actual times
by comparing them to the planned specifications in the daily work
schedule (start and end of planned working time, core times, breaks, and
so on).
TM04:
The time worked by the employee is recorded in the Attendances infotype
(2002), and not as clock-in and clock-out times. When processing
clock-in/out times, the emphasis is on the length of time between the
postings and not on the times at which the postings were made.
You can use schema TM04 to process attendances and absences that specify
a number of hours only, rather than concrete start and end times.
The times stipulated in the daily work schedule are not relevant. Only
specifications such as planned hours and minimum daily working time are
evaluated from the daily work schedule.
TM04 caters both for negative time recording (recording of exceptions to
the work schedule) and positive time recording (recording all
attendances or actual times).
If negative recording is used, the planned hours are generated on the
basis of the daily work schedule. Recorded absences and some attendance
times are deducted (see schema TP01.)
The "Time Management status" indicator in the Planned Working Time
infotype (0007) shows whether all actual times are recorded for an
employee, or only exceptions to the planned specifications.
Regards:
Devi.

Scheduling the Process Flows in Oracle Warehouse Builder

Hi,
Can you please let me know how to schedule the process flows.I mean to make the process flow to run on a daily, weekly basis etc.Where exactly we need to schedule the process flows.
It would be great if you can help me out.
Thanks
Vinay

You can schedule process flows the same way as you schedule mappings. See the following viewlet regarding the scheduling of OWB activities in Oracle Enterprise Manager (OEM):
http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
Regards:
Igor

How to insert PO details in an ADF based form and initiate the process flow

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

Want to know the job of 20k1 Audio Processor on X-Fi Cards

:Want to know the job of 20k Audio Processor on X-Fi Cards? 
X-Fi Processor claimed as world?s most powerful audio processor. i.e. 0,000 MIPS.
This speed is more than the central processor.
If most of X-Fi cards does not have decoding capabilities, for what this much of processing power is required for audio reproduction.
Is this just a manufacturer?s advertisement to exaggerate about the product?
AFAIK, CMSS-3D, 24-bit crystallizer does not require much processing power, if it were required then creative Mp3 players, Xtreme audio, Xtreme notebooks would not have the crystallizer feature.
?
Coming to Games, Direct X engine also does not require more power because to just run the Direct X API on Direct X engine, this much power is not required.
?
Thanks,
Ravi Sankar

A. owh nice answer mister guru DWH well bout DAC well...i comparing recording 48 khz and 96khz 24 bit cannot hear much diffrent cuz the result sound same and exact like from sources but with sounforges i push the limit 92 khz the result diffrent ( but sometimes i suspicious this card have built in compresor inside it to minimize peak)
about compressor built in : ok its really confuse for a while cuz sometimes the sound not kick off but while reach -6 /-3 db the sound kickin somehow
comparing with HD realtek on my notebook asus x5rl
well i experimenting using reaper theres an option 64bit mix wave which i realize HD meaning 64 bit
if i turn off 64 bit option mix then i feel the sound not becoming HD in this soundblaster < thats i think which something getin losing
B. well about software FX? i think all soundcard have a mixer software features like reverbing / echo / equlizer builtin decoder console
i dont know is it FX console u talk bout it is the way optional mixer console whichs is already builtin inside the chipset or not? but if the FX u talkin bout is from console and as a trademark , i dont think thats a reall big surprise for me
becuz i dont wanna mess my project mixing song eq coloring when i recording or playbacking using those FX from console such put crystalize/3D room / reverbing
infact while i recording again / making mix tapes > there only fx i see on that console whois really effecting the recording result such echos, any EQ or Crystalize i dont think really effecting the recording from input DAC, the question is do i need this echos?
cuz while i using profesionnal software music programe for composing i can use mixer EQ event surround 5. option from the software rather than using from a console
but then with this 5. card output that i have in this usb card i think is good idea to make a project making surround sounding via 5. speaker / but is there any 5. speaker profesional compatibles with this card sinces i read some ppl complaining bout uncompabtibles speaker connecting to this card?
which i know if i buy some other profesional card event digidesign prootools card/ alesis or else i cant put 5. soundsystem speaker directyly from the card
but then is come back to the reallity do the disco club already use surround 5. or maybe 7. soundsystem or not
becuz i still know they just using a MONO soundsystem setup some of them LOL
C. owh ok i got it this card chipset cannot act like a micro controller or maybe some kinda intelegent CPU to makes VST worx cuz i know some other product already making some kinda CPU external as VST plugins generator so the CPU desktop / notebook dont have to working hard again to act as VST
thnx
PS: when fresh driver for this card goin be done, since till now i still use driver plug n play detect from windows xp to avoid bugs and BSOD, and then somehow i googles in internet i found PAX driver version but still cannot hold 96khz or 92 khz? via asio
can u make a lighter console? everytimes i put console somehow its pop up so heavy , page 2 pages so heavy

I want to know the function moulde used to convert the unit of measure

The whole process should be done in the Portugues login language.
For the login language PT( Portuguese). In table MARA, if i choose the menu settings-> use parameters-> and chek this field (conversion field exit) . Then for any material if i check the unit of measure (MEINS), is display of all the material its shows differently, but if i select one material and see all the fields of that material, the MEINS field is changed. For example when all the materials are show the MEINS is ST. but when i select one material and display it . it shows PEC in portugues language.
I want to know the function moulde used to convert the unit of measure

HI,
There exits the conversion routine for that particular field in its domain level..
copy that conversion routine and search for that in SE37 your conversion routine
you will find the function module this gives you the internal and external formats
Fms are listed below for MEINS
CONVERSION_EXIT_CUNIT_INPUT    Conversion exit for commercial (3-char) measurement unit INPUT
CONVERSION_EXIT_CUNIT_OUTPUT   Conversion exit for commercial (3-char) measurement unit OUTPUT
For convertiung quantity into base unit of measure you can do this way
CALL FUNCTION 'ME_CONVERSION_MEINS'                       "#EC *
    EXPORTING
      i_matnr             = "give material number"
      i_mein1             = "Unit of measurement "
      i_meins             = "base unit of measure
      i_menge             = "quantity
    IMPORTING
      menge               = "quantioty in your required measurement
    EXCEPTIONS
      error_in_conversion       = 1
      no_success                = 2
      OTHERS                    = 3.
HOpe this helps you
Reward if useful
regards,
nazeer
Message was edited by:
        nazeer shaik

I want to know the process flow in Bill Of Service (BOS)

Similar Messages

Maybe you are looking for