I want to know who's connected to my airport express

Is there any way I can monitor who is using my connection?, I already downloaded Airport Management Tools, and where is says Monitor I can see 2 number with checkboxs that look like this
00:11:24......
00:19:C5......
Does it mean I have 2 people using my connection?
If so how can I disconnect them
I already have the airport with passwords and everything

These are, most likely, the MAC addresses of your AirPort Express Base Station.
A MAC (media access control) address is a unique hardware identification number for a network port. AirPort Express has two MAC addresses: one for the wired Ethernet port and one for the wireless Ethernet port. The wireless MAC address is also known as the AirPort ID.
Although, you can use MAC Access Control to restrict which devices, by MAC address, that can access your base station, this technique is not truly secure as MAC addresses can be spoofed. You best defense is to use WPA or WPA2 encryption.

Similar Messages

  • HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

    I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

    This AirPort Express:
    http://www.apple.com/airportexpress/
    It is the only Express with 2 Ethernet ports. All others are "old"
    Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

  • Who is connected to my Airport Express?

    I have downloaded the Airport Admin Utility, and was wondering how I could find out which computers are connected to my Airport. I know this is easy with a regular router, where the MAC-adresses of every computer is shown. Is this possible with Airport? And if not, why the **** not?!

    K3vin, Welcome to the discussion area!
    See the thread "Who's on my network".

  • Finding out who is connected to my AirPort Express

    I have downloaded the Airport Admin Utility, and was wondering how I could find out which computers are connected to my Airport. I know this is easy with a regular router, where the MAC-adresses of every computer is shown. Is this possible with Airport? And if not, why the **** not?!

    K3vin, Welcome to the discussion area!
    See the thread "Who's on my network".

  • Determining what/who is connected to my airport express/extreme?

    In my old Linksys, there was a config page that let me see the IP addresses and MACs of all current attached devices (both wireless and wired) on my network How do I do t his with an Airport Express (and also an Extreme, if the procedure is different.)
    thanks,
    dan

    K3vin, Welcome to the discussion area!
    See the thread "Who's on my network".

  • How can I see who is connected to my Airport Express? Airport utility does not provide it

    Dear community,
    I'm highly surprised by the difficulties to find a simple request… I look on the web, and find some old topic about it, suggesting "Airport Management Tool" which is the old version of the Airport utility on my OSX 10.8.5, so I cannot install it. I have the lasted Airport utiity firmware and software (6.3.1).
    I'm pretty sure Apple have a simple way to do it, without downloading any extra software.
    Thank you for your time, I hope you can help me out.
    Best regards !

    Open Macintosh HD > Applications > Utilities > AirPort Utillty
    Hold down the option key on your Mac while you double click on the icon of your Apple router
    A list of currently connected wireless devices will be displayed
    Click the arrow next to each device to reveal more infomation about the device

  • Knowing how many people is connected to my airport express

    I have an airport express and is encrypted how ever I would like to know how many people is connected to it, is this posible?

    I would like to see things like who's connected to my airport express, and whether the airport has been able to get an IP address from the DSL modem, and so on.
    Can the airport management tools do this? I tried installing the version linked from www.apple.com/support/airport, but got the error "This application requires Airport 3.4 or later." However, I've installed Airport 4.2 already.
    Is the shareware Airport Monitor Utility the only way to go for this? I had a hard time interpreting a lot of the information it was giving me...
    thanks in advance for the reply,
    aram
    Macbook Pro   Mac OS X (10.4.8)   using airport express

  • My phone broke but i want to know who messaged me is there anyway i can view these messages online

    My phone broke but i want to know who messaged me is there anyway i can view these messages online since i cant view them on my phone? If so how?

    You can view the number that the message came from and the date/time it was sent online through MyVerizon on your Usage details, or your Detailed Bill.  It may take a while for that information to come though, and if you have no phone active on your line and delivery fails, i don't think it will show at all.

  • I want to know who use my Apple ID, I want to know who use my Apple ID

    I want to know who use my Apple ID, I want to know who use my Apple ID

    Who has the password? Who has the password?

  • HT2526 i install 50$ redeem card in my account and i used only like 13$ but today i opened my app store and i was shocked coz i only found 0.07$ i want to know who used my money please help me

    i install 50$ redeem card in my account and i used only like 13$ but today i opened my app store and i was shocked coz i only found 0.07$ i want to know who used my money please help me

    Make sure you are using the correct account if you have more than one.
    Purchase history won't say who actually logged in because of course it will be a person using your ID and password.
    Sign into your Account > Click on your account name > Click on Account > Purchase History
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727

  • How can I find out who is connected to my Airport network?

    I want to see if people are stealing my internet, is there anyway I can find out how many specific users are connected to my airport express?
    Thanks very much.

    Open Airport Utility and log into your base station.
    Then on the Summary window, click on "Wireless Clients".
    This will tell you how many people are connected and what ID's they have.
       Joseph Kriz

  • I want to listen to my music through my airport express but I also have a wireless internet connection!

    I want to listen to my music through my airport express but I also have a wireless internet connection!
    I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

    David1854 wrote:
    I want to listen to my music through my airport express but I also have a wireless internet connection!
    I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
    Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
    The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
    It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
    So it's a all Airport Express or back to a stereo mini cable.

  • Connecting computers via Airport Express

    I have a problem that I've been trying to solve, but so far nothing has worked.
    I have three Macs, 2 G4 PowerBooks and an iMac (Core 2 Duo) which are all connected via an Airport Express. All of the computers can access the net and my printer just fine. The iMac can connect to both of the G4s, and one of the G4s can connect to both the iMac and the other G4. The problem is that one of the G4s can only connect to the other G4, not the iMac. It's as though the iMac does not exist for it's purposes. Yet I can connect to that G4 from the iMac, just not the other way around.
    Any clues as to a fix for this would be greatly appreciated.

    That is what you want to select.
    You jumped into the middle of this thread. What
    problem do you have?
    More to the point - what is YOUR problem...I think your response was a little rude...
    One who has common sense can see what issue I am having simply by looking at the subject of the original post - and reading my entire post.
    For your benefit, the subject is: Problems Connecting Two Computers to Cable Modem via AirPort Express.
    If you read my post again, you will see that after following the advice given by Rj, I am still having problems. I will not re-post my question. Simply restating things in this post has been a waste of time.

  • Intel iMac Not Connecting to My Airport Express

    I have had a 15" G4 Powerbook for about 1 1/2 years now and have not had any problems with my Airport Express. I purchased an Intel iMac back in February and everything has been working perfectly until about two weeks ago. (I think this may coincide with the update 10.4.9).
    At first, the Airport would not connect at all after being put into sleep, either if I let it sit or pushed the button myself. I would have to restart to get it to work. Now, whenever I attempt to connect to my Airport Express it says there is an error and only gives the options of trying again or just clicking OK. If I try again it does nothing, but if I click okay the Airport card in my iMac seems to go down completely and I am unable to see ANY wireless networks at all! It comes back eventually and automatically connects to an unsecure network somewhere else in my apartment building, but if I try to connect back to my Airport Express the same thing happens again.
    The odd part is that my Powerbook connects flawlessly, and also sets up the Airport Express if I reset it (something the iMac will not do). I have read through some of the threads and see there is an issue with the release of 10.4.9, but my Powerbook has it as well and doesn't have any issues.
    I also have Vista premium installed and that has absolutely no problems connecting to the network either, which is irksome every time I see a PC vs Mac ad.
    I have tried a couple of the remedies offered up: deleting the SystemPreferences folder in the Library (couldn't find it), creating a new location (didn't work), and reinstalling OSX (worked for a day after the 10.4.9 update).
    If there is anyone with similar problems who has found a solution, please let me know, as I don't really like using someone elses network, but don't really have a choice if I need to use my iMac. Thank you for your help.
    iMac 17" 2Ghz   Mac OS X (10.4.9)  

    Hello sgraziano,
    I suggest taking a look at this article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/ts1398.
    Follow these steps to troubleshoot the above issues.
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    And this section at the bottom if that troubleshooting does not resolve hte issue:
    Unable to connect to a Wi-Fi network
    Verify that you are attempting to connect your desired Wi-Fi network.
    Make sure you are entering your Wi-Fi password correctly.Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
    Take care,
    Sterling

  • Can I use my HP D4360 to AirPrint from my iPhone if it's connected to and AirPort Express?

    I'm trying to figure out if I can print from my iphone 4 to my HP D4360 using AirPrint. The HP is connected to an AirPort Express (2nd Gen). The iPhone says there are no AirPrint printers connected. Can this be done?

    Unfortunately, connecting the printer to the AirPort Express will not help if the printer is not AirPrint compatible.
    You might want to check out HP's new ePrint feature......HP ePrint | HP.com
    Or, if you have a Mac on the network, you can try an App like Printopia.  There is a free trial, so you will know in 5 minutes whether it will work or not.
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

Maybe you are looking for

  • GUI Query Builder for Users

    Hey all, For anyone who was following my last post, I did convince my boss to buy CF, so epic win there. I am now starting to replace some our existing software with CF based code. One of the first things we would like to do is setup a "Query builder

  • In which table Scripting data is saved

    Hi Experts, I have configured scripting in  my ic web client profile. Now i have a business requirement like for which customer which script he requested(customer name-script name).    In which sap table scripting is  saved. Is it possible at the end

  • Benefits services (WD Java) in EhP5 using NWBC

    Hi, We are using NWBC to acces WDA portal application... They seems to work fine, however, the Benefits applications are still in WD for Java. Is there a way we can access these Benefits applications using NWBC (for html)? We are using EhP5. I am tol

  • IPad not charging nor syncing

    My iPad stop charging today and I don't know why. It's not my plug or cord because it charges my iPad. I've even tried turning it off and resetting it but it still won't charge. What wrong with it? When I plug it to the computer it doesn't get detect

  • I can't install adobe premiere

    Hi, I have just purchased Adobe Premiere and Photoshop and I am really struggling to install them on my mac. Both reach 39 per cent maximum and then freeze. It is a fairly new mac so that should not be causing the problem. I fly to South Africa tomor