I want to link with two folio!

In same Library,i want to link with different folio,what can i do?
ps.Up to now,DPS is no any bug in ios6?

You have to create an "aggregate device." See here:
http://www.bulletsandbones.com/GB/Tutorials/AggregateDevice10.6.html
http://www.bulletsandbones.com/GB/Tutorials/AggregateDevice.html

Similar Messages

  • Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    It is not possible to do that.
    Allan

  • Bridge link with two aironet 1242

                       Hi to all,
    I want to connect with wireless devices two buildings, one in front of another.
    Short distance (about 20 meters) and no obstacles.
    I have a couple of aironet 1242 and i was wondering if it would be possible to setup this link with this equipment.
    could  WGB be the solution?
    thank you very much

    WGB could work, if you do not need to extend multiple VLAN across the link, and you have less than, I want to say 200, devices.
    What you might want to look into is Root/ non-Root bridging.
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • One keybord linked with two computers simultaneously

    K so here is what I want to do. I want to link my apple bluetooth keyboard to my macbook pro and imac at the same time so that when I type on one computer in say MS Word the same type will show up on the other computer at the same time. Is it even possible with bluetooth?
    thanks!

    "Is it even possible with bluetooth?"
    No.

  • Want to record with two mics but don't want to spend more than $150...

    Hey everyone.
    I want to do shows with my sister and I want to use two mics. Or do I need to use two mics? I
    We tried using my one Logitec Desktop usb mic but her voice was very low.
    I don't want to spend more than $150.. my current setup:
    1.42 GHz Power PC G4 eMac
    two Logitech USB Desktop mics
    GarageBand 3
    That's it.
    I tried Line In and Soundflower to do this a while ago and got this awful reverb effect.
    Any tips and help are appreciated.
    Denise
    The Home Spa Goddess Show
    All the latest and greatest bath, body and beauty news!
    Previously On Alias...
    The Podcast Devoted To All Things Alias
    The GoddessCast Station
    TV talk with the Home Spa Goddess - Now featuring reviews and talk about "24"

    For my podcast (the Weekly Anime Review) I use a MXL 990 condenser microphone and a Behringer UB802 mixer. I recently got a second mic, and I couldn't be happier with this setup. Musiciansfriend.com has the mixer and the mic for $49.99 each. They also have free shipping for orders over $100. Don't forget to get a couple mic cables too, the MF branded ones work great and they are only $3.99 for a 20 foot cable.
    Check out my podcast at www.weeklyanimereview.com to hear how this set-up sounds. I've been using it since the beginning, and I'm extremely happy with the audio quality. Hope this helps!
    Aaron

  • Want to link with iPad.

    I just bought my first mac and want to take advantage of the camera on the iPad to use as a webcam on the mini. is this possible?

    is this what you're looking for? https://www.senstic.com/iphone/pocketcam/pocketcam.aspx

  • File could not be written....is the problem when trying to import any photo from my hard drive.. I have just downloaded lightroom 5 and it does not seem to want to link with my photos .. win 7

    question

    Could you quote the entire error message, word-for-word, verbatim? What Import settings are you using ... Copy, Move, Add?
    Most likely you have a permissions issue, but it will be much more clear to me if I can see the entire message.

  • Create a point to point link with a wlc 4402

    Hi to all,
    i have a wlc 4402 and i need to configure a point to point link with two air-lap1310g-e-k9, i have found on cisco.com this link:
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808e9c1b.shtml#zero
    but on the wlc configuration page i cannot found some configuration step.
    Someone have configured this type of behaviour or can give me some hints?!
    How can i configure on the wlc the parameter about the bridges configuration?! Or i must configure the bridges overriding the global configuration?!
    Thanks and best regards,
    Carlo Sagratella.

    The correct thing to do would be to downgrade the 1310's to autonomous (or 1242's) and set up a root bridge and non-root bridge.
    Alternately however, if you REALLY wanted one of the points to be LWAPP, in theory you could always make one of the Access Points Autonomous and join it as a workgroup bridge to the LWAPP AP. However, there really is no reason to do that since it would be cleaner to convert both to autonomous.

  • Can an ipod only be linked with one library on itunes on one computer?

    I have set up my ipod on one computer and downloaded a load of music on to it. now i want to put more music on from another computer but the computer is telling me that all the music i have on it already will be replaced by this new library from a different computer. Can't an ipod be linked with two different librarys without all music being deleted?

    See: Using iPod with multiple computers.

  • I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

    Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • I want to create an ALV  with two row fields name

    Hi
    I want to create an ALV  with two row fields name. please suggest how to do it or send some sample code
    thanks

    Hi,
    see this link
    http://****************/Tutorials/ALV/ALVMainPage.htm
    http://www.alvrobot.com.ar/tutorial.php
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09ac4d5-e3ad-2910-6a81-96d1b861928c
    http://abapprogramming.blogspot.com/2007/11/alv-check-boxes-sample-code.html
    REPORT zalv5 NO STANDARD PAGE HEADING.
    Description----
    TOPICS INTRODUCED:
    1. Learn about the u2018Standardu2019 PF-Status that comes as default.
    2. Exclude function codes from u2018Standardu2019 PF-Status and customize it.
    TYPE-POOLS: slis.
    DATA: BEGIN OF i_data OCCURS 0,
    qmnum LIKE qmel-qmnum,
    qmart LIKE qmel-qmart,
    qmtxt LIKE qmel-qmtxt,
    ws_row TYPE i,
    ws_char(5) TYPE c,
    chk,
    END OF i_data.
    DATA: report_id LIKE sy-repid.
    DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
    DATA: i_layout TYPE slis_layout_alv.
    DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
    DATA: i_events TYPE slis_t_event.
    DATA: i_header TYPE slis_t_listheader.
    DATA: i_extab TYPE slis_t_extab.
    SELECT qmnum
    qmart
    qmtxt
    INTO TABLE i_data
    FROM qmel
    WHERE qmnum <= '00030000010'. LOOP AT i_data. i_data-ws_row = sy-tabix. i_data-ws_char = 'AAAAA'. MODIFY i_data. ENDLOOP. report_id = sy-repid. PERFORM f1000_layout_init CHANGING i_layout. PERFORM f2000_fieldcat_init CHANGING i_fieldcat. PERFORM f3000_build_header CHANGING i_header. PERFORM f4000_events_init CHANGING i_events. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = ' ' i_callback_program = report_id * I_CALLBACK_PF_STATUS_SET = ' ' * I_CALLBACK_USER_COMMAND = ' ' * I_CALLBACK_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_END_OF_LIST = ' ' * i_structure_name = ' ' * I_BACKGROUND_ID = ' ' i_grid_title = ws_title * I_GRID_SETTINGS = is_layout = i_layout it_fieldcat = i_fieldcat * IT_EXCLUDING = * IT_SPECIAL_GROUPS = * IT_SORT = * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' i_save = 'A' * IS_VARIANT = it_events = i_events * IT_EVENT_EXIT = * IS_PRINT = * IS_REPREP_ID = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IT_ALV_GRAPHICS = * IT_ADD_FIELDCAT = * IT_HYPERLINK = * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * ES_EXIT_CAUSED_BY_USER = TABLES t_outtab = i_data EXCEPTIONS program_error = 1 OTHERS = 2 . IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *& Form F1000_Layout_Init
    FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
    CLEAR i_layout.
    i_layout-colwidth_optimize = 'X'.
    i_layout-edit = 'X'.
    ENDFORM. " F1000_Layout_Init
    *& Form f2000_fieldcat_init
    FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
    DATA: line_fieldcat TYPE slis_fieldcat_alv.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
    line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
    line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
    line_fieldcat-seltext_m = 'Notification No.'. " Column Header
    APPEND line_fieldcat TO i_fieldcat.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'QMART'.
    line_fieldcat-ref_tabname = 'I_DATA'.
    line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
    line_fieldcat-seltext_m = 'Notif Type'.
    APPEND line_fieldcat TO i_fieldcat.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'QMTXT'.
    line_fieldcat-tabname = 'I_DATA'.
    line_fieldcat-seltext_m = 'Description'.
    APPEND line_fieldcat TO i_fieldcat.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'WS_ROW'.
    line_fieldcat-tabname = 'I_DATA'.
    line_fieldcat-seltext_m = 'Row Number'.
    APPEND line_fieldcat TO i_fieldcat.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'WS_CHAR'.
    line_fieldcat-tabname = 'I_DATA'.
    line_fieldcat-seltext_l = 'Test Character Field'.
    line_fieldcat-datatype = 'CHAR'.
    line_fieldcat-outputlen = '15'. " You can specify the width of a
    APPEND line_fieldcat TO i_fieldcat. " column.
    CLEAR line_fieldcat.
    line_fieldcat-fieldname = 'CHK'.
    line_fieldcat-tabname = 'I_DATA'.
    line_fieldcat-seltext_l = 'Checkbox'.
    line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
    line_fieldcat-edit = 'X'. " This option ensures that you can
    " edit the checkbox. Else it will
    " be protected.
    APPEND line_fieldcat TO i_fieldcat.
    ENDFORM. " f2000_fieldcat_init
    *& Form f3000_build_header
    FORM f3000_build_header USING i_header TYPE slis_t_listheader.
    DATA: gs_line TYPE slis_listheader.
    CLEAR gs_line.
    gs_line-typ = 'H'.
    gs_line-info = 'This is line of type HEADER'.
    APPEND gs_line TO i_header.
    CLEAR gs_line.
    gs_line-typ = 'S'.
    gs_line-key = 'STATUS 1'.
    gs_line-info = 'This is line of type STATUS'.
    APPEND gs_line TO i_header.
    gs_line-key = 'STATUS 2'.
    gs_line-info = 'This is also line of type STATUS'.
    APPEND gs_line TO i_header.
    CLEAR gs_line.
    gs_line-typ = 'A'.
    gs_line-info = 'This is line of type ACTION'.
    APPEND gs_line TO i_header.
    ENDFORM. " f3000_build_header
    *& Form f4000_events_init
    FORM f4000_events_init CHANGING i_events TYPE slis_t_event.
    DATA: line_event TYPE slis_alv_event.
    CLEAR line_event.
    line_event-name = 'TOP_OF_PAGE'.
    line_event-form = 'F4100_TOP_OF_PAGE'.
    APPEND line_event TO i_events.
    CLEAR line_event.
    line_event-name = 'PF_STATUS_SET'.
    line_event-form = 'F4200_PF_STATUS_SET'.
    APPEND line_event TO i_events.
    ENDFORM. " f3000_events_init
    FORM F4100_TOP_OF_PAGE *
    FORM f4100_top_of_page.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary = i_header.
    ENDFORM.
    FORM F4200_PF_STATUS_SET *
    FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
    REFRESH i_extab.
    PERFORM f4210_exclude_fcodes CHANGING i_extab.
    SET PF-STATUS 'STANDARD' OF PROGRAM 'SAPLSALV' EXCLUDING i_extab.
    ENDFORM.
    *& Form f4210_exclude_fcodes
    FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
    DATA: ws_fcode TYPE slis_extab.
    CLEAR ws_fcode.
    ws_fcode = '&EB9'. " Call up Report.
    APPEND ws_fcode TO i_extab.
    ws_fcode = '&ABC'. " ABC Analysis.
    APPEND ws_fcode TO i_extab.
    ws_fcode = '&NFO'. " Info Select.
    APPEND ws_fcode TO i_extab.
    ws_fcode = '&LFO'. " Information.
    APPEND ws_fcode TO i_extab.
    ENDFORM. " f4210_exclude_fcodes
    thanks
    karthik
    reward me if usefull

  • I accidentally ended up with two versions of Photoshop Elements in my cart and can't find a way to delete one.  Also, I am living in Peru and want to purchase the US version.  Will it still download?

    I accidentally ended up with two versions of Photoshop Elements in my cart and can't find a way to delete one.  Also, I am living in Peru and want to purchase the US version.  Will it still download?

    Karenl33987234 I am sorry that you are facing difficulty contacting our support team. You should be able to chat with a member of our support team at Contact Customer Care.  If this link does not work then I would recommend using a different web browser, smart phone, tablet, or computer to visit the page.
    I did review the account which you utilized to post to this public forum but I did not see any orders or Adobe software titles registered.  Please make sure to sign in with the Adobe ID/e-mail address tied to the order you are facing difficulties with.

  • I have a laptop with two users and want to share my musice between the two of them on seperaye id's

    I want to share music on my laptop with two different users and two different apple id's but i can find a way of doing this any ideas as you can't have itunes open at the same time on on laptop even in different users

    Hello,
    Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
    ~Deepak

  • Need help recording with two linked firepods and an outboard mixer

    Hi!
    Well I've been using Logic for a couple of years but always stayed "in the box".
    Now that I started working out of the box I encountered a strange problem. Let me explain...
    Since recently I have an analog Soundcraft Ghost mixer and two firepods. I linked the two firepods (aggregate device) and recorded 16 tracks into Logic. I sent these back to the mixer through the outputs of my firepods (I used the I/O plugin on each track to get a mono output).
    I made the whole mix on the mixer and now I want to record that mix back into logic (in order to have a Stereo mix ready for mastering).
    I thought all I had to do was create a new stereo audio track in Logic (choose input i.e. 1-2), connect the master output from the table to input 1-2 on my firepods, set the gain on the preamps. Arm the track, hit record.
    Now the problem I have is that what is recorded sounds reeeaaaally strange. It's like distorted or some kinda feedback. Bit difficult to explain. But it sure doesn't sound right at all...
    Does anyone knows what the problem could be?
    Could it be that with the firepods you can't use an input if you allready use it's output?
    If you need any more info, let me know!
    By the way, I'm working on a Macbook Pro 2,4 with osx10.5.6 and Logic Pro 8.0.2
    Greetz,
    NLS

    The problem sounds like you have a feedback loop between the outputs and the input. Here's my suggestion:
    1 Turn the Mixer control on the Firepods all the way to the right, to make sure the Input signal is not mixed back in to the outputs
    2 Mute the stereo Input channel that you're recording on (in Logic) before you arm the Record button
    3 After you have recorded your mix into Logic, disarm the Record button, un-mute and solo the channel, then play back

Maybe you are looking for

  • How can I link .svg files in the .html code?

    How can I link .svg files in the .html code?

  • I cannot export a slideshow at 24fps from Aperture 3?

    I import clips to Aperture 3 filmed at 24fps on a Canon EOS 60D and when I try to use the custom settings to export at 24fps, it changes it to 30-35fps. The custom settings are useless in Aperture 3 as it still does whatever it wants. The only way I

  • Create/Edit "Custom Attributes" in Dynamic Distribution Groups

    Hi, I wanna create a Dynamic Distribution Group based on the users "title" and "company". I've noticed that there are 15 "Custom Attributes" that I can edit in someway, I guess via PowerShell? So what is the easiest way to accomplice this?

  • Multiple signatures per address

    Is there any way to get Mail to handle a signature per each sending address, under one account? Pretty much every other Mail client out there seems to support this. It seems odd that I can have random signatures, but not ones bound to an address. In

  • Client Dependent or Client Indipendent

    Hi All, Could you plz tell me, XI Scenarios are Client Dependent or Client Independent ? Is there any T.Code Creation for every scenario like ABAP ? Who run these scenarios in Production system ? And how they are know this scenario for this purpose ?