I want to load movies in to my iPad through itune in my pc that runs window XP. First of all I am not able to add the movies to the itune ,leave aside sync to iPad .can some one suggest what is the simplest way to load movies in my iPad.
I have plenty of DVD which I load in my laptop and watch the movies while travel, however I am not able to do that in my iPad .
I would appreciate some one guide me the simplest way of loading the movies in to my iPad. I tried the conventional procedure of loading/copying in to itune then sync to the iPad to load all movies in it, but failed to do the first step( not able to load /copy in itune) leave aside the sync to iPad next.
Do I need to sellout some 20 odd $ to buy a conversion software that would help?
Is it that Apple trying to make money by not making this simplest of thing possible by the user.( ref. windows, every thing is possible with little IQ of the user).
If it is so , I would stop many of my friends to restrain from buying a device like this by spending some 1000$ ,rather look at a good Droid that is catching up so well.
If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.
Similar Messages
-
I am unable to attach/send a 2486KB file when using Firefox browser. I am able to attach and send via Internet Explorer though. Up until a few days ago, this was never a problem. I've sent the file before. What could be the problem? I am very frustrated.
I do have anti-virus software that scans the files. It sounds like you are accurate. But nothing is new...I have sent the same file numerous times in the past with no problems, but all of sudden, I can't send the file. What can I do to fix this problem?
-
can some one help me with the question ..
no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...
-
I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.
It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.
-
Can any one say What are the mandatory parameters in BAPI_GOODSMVT_CREATE
Hi,
Can any one say What are the mandatory parameters in
BAPI_GOODSMVT_CREATE.
Helpful answer will be rewarded.Hi,
The following is an abap program making used of the BAPI function BAPI_GOODSMVT_CREATE to do Goods Receipts for Purchase Order after importing the data from an external system.
BAPI TO Upload Inventory Data
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
02 - MB31 - Goods Receipts for Prod Order
03 - MB1A - Goods Issue
04 - MB1B - Transfer Posting
05 - MB1C - Enter Other Goods Receipt
06 - MB11
Domain: KZBEW - Movement Indicator
Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
errflag.
data: begin of pcitab occurs 100,
ext_doc(10), "External Document Number
mvt_type(3), "Movement Type
doc_date(8), "Document Date
post_date(8), "Posting Date
plant(4), "Plant
material(18), "Material Number
qty(13), "Quantity
recv_loc(4), "Receiving Location
issue_loc(4), "Issuing Location
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
del_no(10), "Delivery Purchase Order Number
del_item(3), "Delivery Item
prod_doc(10), "Production Document No
scrap_reason(10), "Scrap Reason
upd_sta(1), "Update Status
end of pcitab.
call function 'WS_UPLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
itab-move_type, itab-entry_qnt, itab-entry_uom,
itab-entry_uom_iso, itab-po_number, itab-po_item,
pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
TESTRUN = ' '
IMPORTING
goodsmvt_headret = mthead
MATERIALDOCUMENT =
MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
else.
write:/ mthead-mat_doc, mthead-doc_year.
perform upd_sta.
endif.
endif.
FORM UPD_STA *
form upd_sta.
loop at pcitab.
pcitab-upd_sta = 'X'.
modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
exporting
filename = p-file
filetype = 'DAT'
IMPORTING
FILELENGTH =
tables
data_tab = pcitab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6
endform.
*--- End of Program
Reward for useful answers.
Regards,
Raj. -
Why won't my g4 desktop come on. I was trying to boot in safe mode and it would not go in safe mode. It won't come back on anymore. Can some tell me what to do.
Try Single User mode (Command+S while starting up).
Then, run fsck.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, typerebootat the prompt and then press Return.
Your computer should start up normally and allow you to log in.
http://support.apple.com/kb/TS1417 -
I have an IMAC 10.6.8
Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site. Do I need to purchase the complete one?If you have iWeb V 3 you need to go to the Site Publishing Settings page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
I have a Iphone 4, upgraded to ios 5 with itunes 10.5 Since doing upgarde to both Itunes and Iphone I am not able to add individual songs from my itunes library to my Iphone. I get a grey listing of the song and the sync symbo but it is not moving. Nothing appears on my phone screen. So not able to add music to my phone and its driving me nuts.....
iOS 7 requires iTunes 11.1.
-
Can some one help me for the following issues ......
while creating the bill in vf01 am getting as the status as open.(ie being processed )in fbl5n Dn is not reflecting
manjunath2684 wrote:
begin
SYS.DBMS_LOGMNR_D.BUILD(
options => sys.dbms_logmnr_d.store_in_redo_logs);
end;
It would be great if some one can explain me what oracle does internally when we run the above procedure. I understand that i writes the dictionary to the redo logs. I am trying to understand:
1) Where does the oracle read from(Which of the system tables)?
2) What queries does it internally run to write the dictionary to redo logs.
Regards,
Manjunathconsider enabling SQL_TRACE when you invoke this procedure to capture SQL issued -
Can any one tell what is the problem in this code?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.geom.*;
import java.util.*;
public class AppletTest2 extends JApplet implements ActionListener,MouseMotionListener,WindowListener{
JFrame fr = new JFrame("Visual Tool -- Work Flow Editor");
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
JButton sButton = new JButton("Source");
JButton rButton = new JButton("Redirection");
JButton dButton = new JButton("Destination");
JButton connect = new JButton("Connect");
BasicStroke stroke = new BasicStroke(2.0f);
int flag = 1 ;
Vector lines = new Vector();
JButton sBut,rBut,dBut;
int x1 = 0 ;
int y1 = 0 ;
int x2 = 0 ;
int y2 = 0;
int x3 = 0;
int y3 = 0;
int i=0;
int j=0;
int k=0;
int l = 100;
int b = 50;
public void init(){
/*********Frame ******************/
fr.getContentPane().setLayout(new BorderLayout());
fr.setSize(700,500);
fr.getContentPane().add(panel1,BorderLayout.CENTER);
fr.getContentPane().add(panel2,BorderLayout.SOUTH);
fr.addWindowListener(this);
/*****************PANEL 1*********************/
panel1.setLayout(null);
panel1.setBounds(new Rectangle(0,0,400,400));
panel1.setBackground(new Color(105,105,205));
/************************PANEL 2 *************/
panel2.setLayout(new FlowLayout());
panel2.setBackground(new Color(105,205,159));
panel2.add(sButton);
panel2.add(rButton);
panel2.add(dButton);
panel2.add(connect);
connect.setToolTipText("Use this button after selecting From and To position to connect");
/***************************LISTENER********************/
sButton.addActionListener(this);
rButton.addActionListener(this);
dButton.addActionListener(this);
connect.addActionListener(this);
fr.setVisible(true);
fr.setResizable(false);
} // init clse
/************************** START METHOD **********************************************/
public void start(){
System.out.println("inside start");
paint(panel1.getGraphics());
/*******************************APPLET METHODS **************************************************/
public void stop(){}
public void destroy(){}
/******************************MOUSE MOTION LISTENERS METHOD*************************************/
public void mouseMoved(MouseEvent e){System.out.println("moved");}
public void mouseDragged(MouseEvent e){System.out.println("dragged");}
/***************************************ACTION EVENT IMPLEMENTAION *******************************/
public void actionPerformed(ActionEvent e){
if (e.getSource().equals(sButton)){
sourceObject("Source Object");
else if (e.getSource().equals(rButton)){
redirectionObject("Redirection");
i = i+1;
else if (e.getSource().equals(dButton)){
destinationObject("Destination");
j= j+1;
else if (e.getSource().equals(connect)){
System.out.println("am inside connect");
paint(panel1.getGraphics());
else if(e.getSource().equals(sBut)){
System.out.println("am s button");
x1 = sBut.getX() + l;
y1 = sBut.getY() + (b/2);
else if(e.getSource().equals(rBut)){
System.out.println("am r button");
x2 = rBut.getX() ;
y2 = rBut.getY()+ b/2;
System.out.println("x2 : " + x2 + "y2 :" +y2 );
else if(e.getSource().equals(dBut)){
System.out.println("am d button");
x3 = dBut.getX();
y3 = dBut.getY()+ b/2;
} // action close
/**********************Main **********************************/
public static void main(String args[]){
JApplet at = new AppletTest2();
at.init();
at.start();
/********************my methods starts here *******************/
public void sourceObject(String name){
sBut = new JButton(name);
panel1.add(sBut);
sBut.setBounds(new Rectangle(20,208,l,b));
sBut.addActionListener(this);
System.out.println("am inside the source object") ;
public void redirectionObject(String name){
rBut = new JButton(name);
panel1.add(rBut);
rBut.setBounds(new Rectangle(290,208,l,b));
rBut.addActionListener(this);
System.out.println("am inside the redirection :" + j) ;
public void destinationObject(String name){
dBut = new JButton(name);
panel1.add(dBut);
System.out.println("am inside the destination object") ;
if (j == 0)
dBut.setBounds(new Rectangle(566,60,l,b));
System.out.println("am inside the destination:" + j) ;
} else if (j == 2)
dBut.setBounds(new Rectangle(566,208,l,b));
System.out.println("am inside the destination :" + j) ;
} else if (j == 1)
dBut.setBounds(new Rectangle(566,350,l,b));
System.out.println("am inside the destination :" + j) ;
dBut.addActionListener(this);
/* public void connectObject(Object obj1,Object obj2){
System.out.println("nothing");
/************************************* PAINT **************************/
public void paint(Graphics g){
System.out.println("inside paint");
Graphics2D g2 = (Graphics2D) g;
g2.setStroke(stroke);
if(flag == 1){
System.out.println("inside flag");
int np = lines.size();
System.out.println(np);
for (int I=0; I < np; I++) {
Rectangle p = (Rectangle)lines.elementAt(I);
System.out.println("width" + p.width);
g2.setColor(Color.red);
g2.drawLine(p.x,p.y,p.width,p.height);
System.out.println(p.x +"" +""+ p.y + ""+ ""+ p.width+ "" + ""+ p.height);
flag = -1;
}else if(flag == -1){
if(x1 != 0 && y1 != 0 && x2 != 0 && y2 != 0 ){
// Graphics2D g2 = (Graphics2D) g;
// g2.setStroke(stroke);
g2.setColor(Color.red);
g2.drawLine(x1,y1,x2,y2);
lines.addElement(new Rectangle(x1,y1,x2,y2));
x1 = 0 ;y1 = 0 ;
x2 = 0 ;y2 = 0 ;
// g2.drawLine(100,100,200,200);
else if (x2 != 0 && y2 != 0 && x3 != 0 && y3 != 0 )
// Graphics2D g2 = (Graphics2D) g;
// g2.setStroke(stroke);
g2.setColor(Color.green);
g2.drawLine(x2,y2,x3,y3);
lines.addElement(new Rectangle(x2,y2,x3,y3));
x2 = 0; y2 = 0 ;
x3 = 0 ; y3 = 0 ;
else if (x1 != 0 && y1 != 0 && x3 != 0 && y3 != 0)
// Graphics2D g2 = (Graphics2D) g;
// g2.setStroke(stroke);
g2.setColor(Color.red);
g2.drawLine(x1,y1,x3,y3);
lines.addElement(new Rectangle(x1,y1,x3,y3));
x1 = 0; y1 = 0 ;
x3 = 0 ; y3 = 0 ;
// repaint();
/********************************WINDOW LISTENER IMPLEMENTATION *****************************/
public void windowActivated(WindowEvent we) {
flag = 1;
paint(panel1.getGraphics());
System.out.println("windowActivated -- event 1");
//start();
public void windowClosed(WindowEvent we) {
System.out.println("windowClosed -- 2");
public void windowClosing(WindowEvent we){
System.out.println("windowClosing -- 3");
public void windowDeactivated(WindowEvent we) {
System.out.println("windowDeactivated -- 4");
public void windowDeiconified(WindowEvent we) {
flag = 1;
System.out.println("windowDeiconified -- 5");
paint(panel1.getGraphics());
public void windowIconified(WindowEvent we) {
System.out.println("windowIconified -- 6");
//paint(panel1.getGraphics());
public void windowOpened(WindowEvent we) {
// flag = 1;
// paint(panel1.getGraphics());
System.out.println("windowopened -- 7");
The problem am facing here is that when i minimize the frame and maximize , my old lines are getting disappared.
For avoiding that i am storing the old coordinates and
try to redraw , when maximize.
but the lines are coming for flash of second and disappearing once again ?
can any one help?
thanks allVery interestingly the same code is repainting in
Linux SUSE,jdk1.3.
but not in WINNT , jdk 1.3
Any reason ?
Is the swing 100 % platform independenet ?????
Does swing also uses native thread ??? -
Can any one share what is the flow of mm
HI
GURUS WHAT IS THE FLOW OF MM
THANKS IN ADVANCEHi,
MM Process Flow
The typical procurement cycle for a service or material consists of the following phases:
<b>1. Determination of Requirements</b>
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
<b>2. Source Determination</b>
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
<b>3. Vendor Selection and Comparison of Quotations</b>
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
<b>4. Purchase Order Processing</b>
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
<b>5. Purchase Order Follow-Up</b>
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
<b>6. Goods Receiving and Inventory Management</b>
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and under deliveries of ordered goods.
<b>7. Invoice Verification</b>
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment
Reward if useful
Chandru -
I have firefox 3.0.15 and I am trying to move to 3.6.8. I have the download for 3.6.8 but when i try and run the install nothing seems to happen. I close firefox and reopen and check the rev and it is still 3.0.15. I must be doing something wrong with the install any suggestions?
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Installing+Firefox -
Issue with Workflow template versions? Can any one suggest what to do.
Hello All.
Actually in quality system there is a workflow instance in error. I identified the error and fixed the issue with a new development and transported to quality. Now when i restart the error instance in quality, its not picking the latest template with additional steps i developed, instead, it is catching the older version.
For a fresh instance, my newer version of workflow is getting triggered, why not for error workflow.
I used swu_obuf to synchronize the buffer but no use. What could be the resolution.
Please suggest.
Regards
Prasad.Hi Prasad
Running instances / Waiting / Or in error continue to run in the version in which they were started.
That is why Version increments in QA / PRD when you move a change... so that any running, waiting, error instance can pick the same version of the workflow.
It will not pickup your changed version. Logically it would be incorrect - start in Version A and end in Version B..... say start in version which "Auto Approves" a PO of value INR <=100 .... error .... restart in a changed version which now had auto approve limit of INR 1000. The PO will not be auto approved whereas the day it was started, the limit was only 100. So it makes sense to restart a workflow in the same version in which it was started. That is how the architecture has been designed.
To conclude, if the steps which went in error because of the data from your previous step (which you have changed now) - see if you can change the container data and restart the WI from SWIA so that the work item starts with a new set of data. Else, discuss with business owners to cancel these workflows and restart new ones.
regards,
Modak -
Hi can some tell me what is the difference between sapr3 and sap business 1
is there any difference between sap business one and sap r3 if i learn sd module
Hi Siva,
The SD module from R/3 is completely unrelated to the business processes and technologies used in SAP Business One (SBO). R/3 and SBO are completely different products and direct comparisons are difficult. I don't think learning one will help in any degree in learning the other. With R/3 you tend to specialise in one area (eg SD) as the complexity and scale of implementations requires this specialisation. With SBO, a single consultant would be expected to know the whole product. SBO is a much simpler product designed for small to medium sized companies so the processes are much more generic.
Kind Regards,
Owen -
Can any one suggest me useing right way for using cost centers
Hello Guru's
I am in implementation Projec, The client is in Depote Sales process, i just want to know about the cost cenetr and their importance we are creating 20 different cost centers is it really required to create 20 different cost centers, for integrations with MM And SD should i have to take one cost center per plant for Purcase and Sales related activites are should i have to take different Cost Centers Purcase different and Sales different
Can any one suggest which is the right way to use the cost center for integration
Management 0010 DI10100010
Finance & Accounts 0020 DI10100020
HR and Personnel & Admin 0030 DI10100030
Purchase - Equipment 0040 DI10100040
Purchase - Parts 0050 DI10100050
Purchase - General 0060 DI10100060
Imports 0070 DI10100070
Sales & Marketing - Equipment 0080 DI10100080
Sales & Marketing - Parts 0090 DI10100090
Sales - Miscalenous 0100 DI10100100
Exports 0110 DI10100110
Logistics 0120 DI10100120
Services & Technical 0140 DI10100140
Information Technology & Systems 0150 DI10100150
Warehouse 0160 DI10100160
Workshop 0170 DI10100170
Workshop ( Repairs ) 0180 DI10100180
Production 0190 DI10100190
Internal Audit 0200 DI10100200
Legal 0210 DI10100210
Training & Development 0220 DI10100220
Research & Development 0230 DI10100230
Moderator: Please, read basic SAP material on help.sap.comhi,
my transaction is VL02N change outbound delivery.
Maybe you are looking for
-
Mail-form from dB Masters + reCaptcha - Things wont work the way i want.
I used a mail-form from dB Masters because someone here gave me the tip. And its great! But it uses a simplefied Captcha script. I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php If you try to send mail it
-
This accessory is not optimize for this iphone
This accessory is not optimize for this iphone. This massage keep pooping up every now and then in my new Iphone4. Can anybody tell me how to fix it? I googled in yahoo. They suggested me using cydia after jailbreaking. I do not wan to jailbreak
-
Hi All: Need help, any idea how to map these MRP elements to standard keyfigures in Pl. area 9ASNP02. MR Reservation QM Inspection lot for quality management BB Subcontractor requirements of material provided UR Stock transfer reservation If these MR
-
How do i upgrade from 10.5.8 to 10.6.7
Hello, I know this might be a dated question, but I'm just now upgrading from 10.5.8 Today I bought os x 10.6.7 Disc goes into the computer, i accept the terms of service and after a second looking for the hard drive the instalation autoquits. Can't
-
Hi friends, When i tried to apply obiee patchset 11.1.1.6.11 on top of obiee 11.1.1.6 im getting an opatch error like below C:\Documents and Settings\Administrator>cd C:\OBIEE\Oracle_BI1 C:\OBIEE\Oracle_BI1>set ORACLE_HOME=C:\OBIEE\Oracle_BI1 C:\OBIE