I want to make a DVD on how to use Garage band and sell them. Do I need apple's permission to do this?
If I want to write a book on how to make great music in Garage Band and sell the book do I need permisison. I also thought about making video tutorials on the same subject. Again do I need permission to do this?
This is a user forum, and certainly not a legal forum.
Legal systems and requirements vary by geography.
If you have a legal- or trademark-related question, you'll want to check directly with your own lawyer, and potentially with the folks at Apple Legal.
Similar Messages
-
How to use Garage Band to play a live gig (voice and acoustic guitar)
Hello!
I'd like to know if I could I use Garage Band to play a live gig (voice and nylon acoustic guitar).
I have an M-Audio fast Track PRO (with 2 plug-ins) as well.
Is the M-Audio Fast track strictly for recording or could it be used for live too?
And for the speaker I though about splitting the audio output from the computer into 2 and one would connect to a loudspeaker going outwards and the other towards me as a monitor.
And the set I wanted to do included a DJ.
I have the Djay spin table and the software.
Would it be possible to run GarageBand for me with the voice and guitar plugged into the M-Audio and then into the Mac and equalize it (and either record it or just play through it). And, on another screen the Djay software and also connect the spin table into the Mac and run it together with me?
Thanks,
Fernando.
www.fernandoingles.comjust playing through GB should be fine, but recording, especially with other software running, might fail. if having a record of the event isn't the most important thing, then go for it. otherwise, i'd suggest using an audio editor to capture the event as you play though GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Garageband is a fun thingy
But the only thing I know how to use is 'loops'.
How do you use the other bits?
And how do you make a really good thing?Hello there, MishMoosh.
To know all it can do, you might want to look through the following GarageBand document:
GarageBand Help: Get answers fast
http://help.apple.com/garageband/index.html#button-1
Thanks for reaching out to Aple Support Communities.
Cheers,
Pedro D. -
I record my classroom lectures in law school to help study for finals. However in the hour and a half class there are many pauses, bad questions, wrong answers, useless stories or announcements that I do not have to hear again. I import the audio into gargae band and cut out all the unnessesary stuff. I end up with a file of 100 + clips. If i spend the time dragging and droping them so there are no spaces in between clips the process takes forever. However the reward is relistenign to an hour and half lecture in 15-20 minutes. Thats about how much content the professor gives. Is there a way to merge all the audio by selecting some option? I bascially want garage band to just slide all the clips and condence it to one clip.
I have takent the time the last few semesters to do this the hard way and have been able to relisten to an entire class in 3.5 hours which is huge! if you have ever been in law school. But I don't have that kind of time anymore. HELP!petruch wrote:
Is there a way to merge all the audio by selecting some option?
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Hi total noob here, any good tutorials on how to use garage band?
Any one know of any good tutorials on the general use of garage band '11 for a complete beginner? I am just getting started and would like a decent walk through. Any suggestions?
daveridesbikes wrote:
Thank you that is exactly what I am looking for, ...
You're Welcome...
daveridesbikes wrote:
... But who hasnt wanted to be a rock star at some point?
No kidding...
Enjoy your voyage of discovery... -
I have a new macair laptop and it does not have idvd. It has a flashdirve instead, so no internal CD drive though I bought an external one. I'm wanted to make a DVD slide show with music and I was told I can't do that in order to play it on a dvd player. Does Mac have an appication to buy that can do the same thing? I thought I saw one for $39.95 but not sure if it will do this. The apple store did not know for sure. Also, if I bought a used mac laptop, which ones will have the idvd installed on it?
Thanks,
PhyllisIt is now apparent that iWeb, and iDVD, will no longer be supported by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
Other users have complained to Apple via Apple via http://www.apple.com/feedback/idvd.html and/or http://www.apple.com/contact/ and have received a boxed copy of iLIfe 11. Give it a try. In the meantime the following maybe of interest:
iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
All of these issues can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
Apple has announced that iLife is now an unsupported product and those iApps will only be available thru the App Store from now on. However, the boxed iLife 11 at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought. Personally, if I already didn't have a copy I would purchase one to have it for reinstallation purposes if ever needed.
OT -
I just finish a subtitling on a 60 min project now I want to make a dvd
I just finish a subtitling on a 60 min project now I want to make a dvd out of it , first I compressed it using compressor with 90 min best dvd preset , Now I don`t know what tod od , any help ?
Now you get to read the DVD Studio Pro Users Manual and do the tutorials included on the DVD SP disc.
Sorry, but by the time someone has written a walk through for you here, you could have probably read the manual twice.
If you have a problem understanding a particular aspect -sure, ask away. -
I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
Message was edited by: tzaphonThis is not difficult and you will not have to download from the app store.
your computer has what is called a recovery partition that came with it.
simply hold cmd+R while you boot up. let go a second after you hear the chime.
you will boot into the recovery partition.
Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
it will ask you which disk you want to install ML onto. Choose your new USB drive.
easy peasy -
I want to erase the new Garage band and convert to my old one. As soon as it downloaded, I Lost all of my songs from the previous Sessions,HOW DO I GET THEM BACK?
MacBook Pro, iOS 7.0.6
Your signature lists both, Mac and iOS device - are you asking about GarageBand on your Mac or your iPhone/iPad?
If you are asking about the upgrade from GarageBand '11 to GarageBand 10.0 on your Mac, the old GarageBand version should still be installed. The installer will have moved GarageBand '11 to a separate folder "GarageBand 6.0.5" in your Applications folder. Open this folder and click "GarageBand". Does this version still see your old projects? If not, type ".band" into the Spotlight searchfield in the upper right corner of your screen. Does that sfind your missing projects?
If you are asking about GarageBand on iPad/iPhone, there it is not possible to restore the previous version after you upgraded. And I do not see, how this upgrade could have deleted your projects. Have they completely vanished, or can you not open them any longer? If your projects have vanished, restore your device from your backup: See: iCloud: Backup and restore overview
-- Léonie -
Hello all,
when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
How i used the new one to update these apps?
thanksYour device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
tt2 -
HT201210 when I want to make a call show me the call back page and i cant make call
when I want to make a call show me the call back page and i cant make call
You helped me a lot, man!
I've been having the same problem for a long time ever since I changed to a new phone provider with a new sim which works with other phone except my iPhone 4. I just wouldn't make call but can send SMS and receive calls. Now, when I turned off 'call waiting' I could make phone calls. Thanks a million again!
P.S. When I turn on 'call waiting' again I could make call without problem any more. What a heck! -
Considering buying a Macbook pro 13". Want to use garage band - how do i run line in from my guitar. There is not a mic/line input that I can see in specs.
Simple. GarageBand question, GarageBand forum where all those users are jacked into their Macs and can tell you how. Also look to the right of your post to the column, "More Like This."---------------------------------------------->
https://discussions.apple.com/community/ilife/garageband -
i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?
When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem........... -
How to configure multiple buffers and execute them sequentially?
I would like to build up a path follower using at least two buffers. I wish to write data into the buffers in advance and then execute them sequentially. How can I do?
I have tried the case for using two buffers, and could only get the two buffers to work "sequentially",
which means that I could first write data into buffer 1, then execute it, then write data to buffer 2,
then execute it. Is there any way that I could use multiple buffers and exectue them as the sequence as
I want?
The following are the steps that I used for dual buffers:
buffer 1:
flex_set_op_mode
flex_configure_buffer
flex_write_buffer (check ready)
flex_start (check complete)
buffer 2:
flex_set_op_m
ode
flex_configure_buffer
flex_write_buffer (check ready)
flex_start (check complete)
I wish to achieve the following:
flex_configure_buffer (buffer 1 & 2)
flex_write_buffer (to buffer 1)
flex_start (buffer 1)
while waiting (flex_write_buffer (to buffer 2))
flex_start (buffer 2)
The purpose of my using two buffers is to try to prepare data for buffer 2 when we are waiting
for the execution of buffer 1 and we could execute buffer 2 almost immediately when buffer 1 was
done. Apparently, I have tried and with no luck to get it to work.You can always configure a buffer for indefinite continuous operation by setting the total points value in the configure buffer function to be the maximum value allowed. You can the use the check buffer function inside the while loop to monitor the backlog of your buffer in order for enough positions to be avaliable for the next set of points to be downloaded. As long as your sets of data are of a smaller size than the total buffer size this will have the effect you are desiring. You can always make your precalculations for the next set of points while the previous move is being executed, you just need to allow enough time between the beginning and the end of your first move for the next calculation to be done.
-
How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs
How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs
GarageBand on your Mac or on an iPad?
If you are asking abot GB on a Mac you do the following:
Create a new GarageBand project with a Guitar track
Insert the CD and drag the audio file of the Lesson track or backing track to an empty region below the tracks in the timeline of the GarageBand window.
Plug in a set of head phones and put them on to listen to your backing track.
Plug in your guitar and select the guitar track.
Click on the measure where you want to start your recording and select the guitar track.
Press "record" and start to play.
Regards
Léonie
Maybe you are looking for
-
I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.
-
Leopard Disk Utility and Input/Output error messages.
This post is describing a problem I had and how I managed to fix it. When I was researching the Input/Output error message I was getting a couple of people had mentioned this fix on the apple discussion boards, so I thought I would add my fix to supp
-
Hi, Had some questions, would appreciate if somebody could help answer. 1) If I want to do a BDC on TCode T1 and if BDC is successful on T1 then do a BDC on Tcode T2 (all in the same program), Can we do a BDC using session method on multiple transact
-
Aperture plugin does not create keywords correctly on previews
Keywording migration is different between previews and raw files. "Non-face" keywording works as expected for raw files, but not for Aperture preview JPEGs. The preview JPEG seems to suffer with keywords. The child, parent, and child/parent combo all
-
2TB Iomega EZ Media and Backup NAS
Hi, I have a hard disk failure on the unit and would like to replace it. What utilities do I need to prepare a replacement drive and where can I obtain them? My unit is out of warranty and SeaTools shows the drive has failed. Solved! Go to Solution.