I want to make a field grey out in a standard tcode AS02

Hi Friends,
Can anyone explain me how to make a field grey out for the standard tcode AS02. I have to make the serial number in that so that no one can change it.
Let me know the steps, if possible with an example.
Regards,
Ramesh.

Hi Ramesh .,
in Transaction AS02 which field you want to make Grey out .
any how i could not find Screen Exit for the Tcode where u can do such type of things .
if it is with Serial Field You can Validate it with Enhancement : AISA0001 .
I think SHD0 is for Variant creation for Reporting purpose , But AS02 is an Asset Change Transacttion . i dont think you need to use SHD0 .
thanks
Sreenivas Reddy

Similar Messages

I want to make Requistioner field Mandatory in the Purchase requistion.

Whenever i create purchase requistion i want to make Requistioner field mandatory. I have checked the filed selection NBB and changed to mandatory and ME51 also made mandatory after that also whenever i create with ME51 PR is going to next screen without asking for requistioner.
Please let me know where actullay i have to make mandatory so that whenever i create it should ask the requistioner.
Thanks.

H,
You also select the field Requisitioner as mandatory for below field selection>
AKTH,ME51 & ME51N
Because always the field selection: mandatoey , display & optional    will work in
Setting Priority
    Hide 1
    Display 2
    Required entry 3
    Optional entry 4
SAM
Edited by: Saminathan Gopalan on Jun 22, 2010 3:25 PM

Cost Centre Fields Grey out in PO

Dear Experts,
I have one scenario while we create Purchase Requisition with account assignment category K then create Purchase Order with reference of Purchase Requisition but in PO system allow to change the Cost Center.
How can i restrict or system not allow to change the cost center or fields grey out.
Regards
Aamir

Dear Aamir,
The setting of screen layout SPRO>Materials Management>Purchasing>
Purchase Requisition>Define Screen Layout at Document Level can only be
done for Account Assignment Category however you are unable to do it for
Cost Center or G/L account or any other Account Assignment fields.
The problem is that the field of the subscreen account assignment are
set under the transaction spro->Mm->purchasing->account assignment->
maintain account assignment categories. So the functionality you ask for
is not available. So in the standard is not possible but you might try to use
BAdI ME_PROCESS_PO_CUST. I haven´t try it before, but as far as I can see,
other customers have used it for a similar purpose.
Best Regards,
Arminda Jack

Result field greyed out in result recording

Hi,
In Inpspection plan of a material I have two operations.
In QA11 (result recording), I am able to enter the results and save for the first operation.
But for the second operation, the result field is greyed out. I can see the MICs there and I can even save the result but without entering anything in the result field.
Why is this field greyed out?
Thanks and Regards,
Raghu

It is an issue of key dates.
Problem solved.

Qty field greying out in Sales Order

Dear Gurus,
I already posted one thread as given below:
Status of Sales Order not changing .
I was told that the status of the first OR will never change from 'Open', in the process flow: OR - OR - LF - F2, since the Schedule Lines created in the first OR will never be delivered.
We created a new Doc Type 'ZOR' an exact copy of 'OR' and a new Item Category 'ZTAN' an exact copy of TAN and unchecked 'Schedule Line Allowed'. Assigned 'ZTAN' to Doc Type 'ZOR'.
My understanding is now since ZTAN is not relevant for Schedule Lines, this sales order should not create any schedule lines and when this doc type ZOR is referenced to create another order 'OR', the status of 'ZOR' should change to 'Completed' once fully referenced.
But when I created a Sales Order, entering the SP, Material and Quantity and clicked 'Enter', system is giving the Item category as 'ZTAN' but greying out the Quantity field with out any value. Why is this happening?? What am I doing wrong? Please help me out here.
Thanks and regards.
Venkat - Hyd

Hi Venkat,
If you will remove the tick mark/ activation from the "Schedule line allowed" check box in the Item category ZTAN, then you can not deliver the item as without schedule line, you can not delivered.
The process is,
Standard order(e.g, OR) -
> Delivery (LF).
If you remove the activation, then system understands that it is not a deliverable item and takes it to grey mode.
If you want to deliver an item physically, then schedule line must have been allowed for it in its Item category level AND that schedule line must have been deliverable at the Schedule line category level ("Delivery relevance" field must have been activated).
Even one of the two condition is missing then you can not deliver an item physically.
For example, In Item category AGN for Quotation, you will find schedule line is allowed but if you will go to its Schedule line category BN, you will find it is not deliverable (the "Delivery relevance" field is blank).
Therefore, even though there is a schedule line for the Quotation item , still we can not deliver it which is logical.
So, use the available field for logical purpose, it will support you. As the fields are available, you can not put any value what you want, it must be logical.
If you want to make blank the "Schedule line allowed" field then copy the Item category "WKN" or "WKC" and from TAN.
Similarly, copy the Contract and not OR for your purpose.
Where as, you can not create a Delivery directly from Contract. So contract items do not require schedule line. Contract is completed by one or more Release orders and Release orders contain schedule line.
The process is,
Contract (e.g, QC, WK1, WK2) -
> Release orders (e.g, OR) -
> Delivery (e.g, LF).
Therefore, in Item category in contract (e.g,WKN , WKC etc) you will find that "Schedule Line Allowed" field is blank.

PA30 - Personnel Number field greyed out - No input help available.

Hi Experts,
In our System in DEV, & Quality in PA30, we are unable to select employees either by directly giving the number (greyed out) or by selecting through F4 (No input help is available).
But in Production System we can directly give Pernr or select through F4.
Any body tell me what is the reason behind this.
Thanks in advance.
Samanvita.

Hi Hariprasath,
It is not the issue with NUMKR, The number Ranges are already maintained, and are defaulted in NUMKR feature.
This is showing same in DEV / QA/ Prod.
Issue is in DEV / QA, The Personnel Number Field is Greyed out, and not able to select any number.
For that we are going to PA20, open the personnel number first, and open PA30 in another window, then we are changing the data of the employee.
But we want to give Personnel Number in PA30 itself as per SAP Standard.
Any Idea, why it is like this.
Thanks,
Samanvita

SECess field Greyed out in MIGO

Dear All,
I am processing for first stage delear invoice where I need to give the ED values manully.
I have given for BED, AED, ECS. But SECess field is greyed out (non editable mode) so i am unable to give the value.
Kindly suggest to make that field as editable so that i can give the value.
Rgds
Srini

No suitable reply hence closed.

MRP - Sales order and customer fields grey-out

Hi there,
The Sales order and customer fields are grey-out for all MRP generated production orders. Can the SAP programmers please get this fixed? It should either read in the sales order number and the customer number or allow user to type in the sales order, just like the manually created production order.
cheers

Hello Gordon,
If production is make-to-order rather than make-to-stock, the MRP should read in the sales order number and the customer, since it is specific to the sales order. Even for make-to-stock production, where it cannot read in the specific sales order number, it should at least not grey out the field, don't you think so? By greying out the field, users are not allowed to type in the sales order number even when the production order directly relates to a particular sales order. As such, we are not able to link it back to the sales order where other info such as customer's purchase order, etc... can be found.
Could you please advise alternative way of linking MRP generated production orders to the sales orders? thanks

REUSE ALV -- To make a row grey out (disable/non-editable) dynamically!!!

Hello All,
Well again a quick question...
Am using REUSE ALV method to display the ALV report. There are few fields which i've made editable while building the field catalog!
Now by, Dynamically by selecting a row in the list (using the checkbox) and by pressing a button on application tool bar, the selected row should be greyed-out(disabled), that is it should not be anymore editable!
How is it possible?
Any kind of inputs regarding this will be damn damn helpful.
Thanks in advance!
Cheers, Sundar.

Hi,
The above solution 1 will be only applicable if using OO ALV!
above solution 2 will disable the entire column, and then again i need to call the "REUSE ALV"... which i don't want to.. as it opens another screen above the same screen and i have to close it twice!
I know it is possible to grey out the selected row using OO ALV... i want to know if it is possible in REUSE ALV???
Keep shooting please....
Thanks!
Regards,
Sundar

Color Picker in Dreamweaver CC 2014 - Hex field greyed out

The input color field in Dreamweaver CC 2014 is greyed out. Cannot seem to
insert a hex code.

If I have opened the colour picker, the natural assumption is that I want to edit the colour. I should be able to do that using all of the tools, not just the sliders. If I open the colour picker in Photoshop, both the value fields and the sliders are available. Why should Dreamweaver work differently?
Sure David, if you open the color picker in the CSS Designer the value field is available for typing/editing.
But the thing with color picker in Code View is that we can have the cursor focus only one place at a time.
Notice that while the color picker is up in Code View, you can still type in whatever color values in your code, while the picker shows you the exact color.
Hope that helps !
Subhadeep

Need to remove field grey out

Dear All,
I am processing for first stage delear invoice where I need to give the ED values manully.
I have given for BED, AED, ECS. But SECess field is greyed out (non editable mode) so i am unable to give the value.
Kindly suggest to make that field as editable so that i can give the value.
Rgds
Srini

Its a config part SD consultant can decide which is manual n which are auto.

Exchange rate field greyed out when i use custom PO order type

Hi!
Upon creation of PO using SAP standard order type NB, the field exhange rate is editable. While when i used csutom PO order type, it is greyed out. How can we edit this? Where is the configuration of the exchange rate per order type?
If this is configured in IMG please include path, on how exchange rate is configured.
Thanks a lot.

Hi,
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then check for field " Exchange rate "
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Opt. entry", So that You can get this field in Change mode in ME21N trx...
Thx
Raju

User Defined Fields greyed out for one user

Hi Experts,
One of our users is a Super User but on the Business Partner Master Data screen, the User Defined Fields are greyed out.
This is user specific as the issue is happening for the same user on 2 seperate PCs.
Other users can update these UDFs - any suggestions?
Thanks
Greig

Hi
take a look at this SAP Note :
Cannot access settings for the user defined fields
Symptom
Cannot access settings for the User Defined Field(UDF)
Other terms
UDF, user defined field, sbo-udf, settings for UDF are inactive, the settings for the udf are greyed out.
Reason and Prerequisites
Need to use the Settings option to order the udf.
In Tools -> User Defined fields -> Settings the option 'Settings' is greyed out and inactive.
Solution
If in Tools -> User Defined fields -> settings and this option is not available then return to the document and click anywhere in the main document window.
Now return to Tools -> User Defined fields -> settings and this option will now be active.

Revenue recognition field greyed out

Hi Gurus,
I am unable to set revenue recognition for item categories as the fields are greyed out. Please help me with relevant settings and configuration.
Thanks in advance
Raj

Hi,
In IMG under
Sales and Distribution -> Basic Functions -> Account Assignment/Costing -> Revenue Recognition -> Set Revenue Recognition For Item Categories
and
Sales and Distribution -> Sales -> Sales Document Item -> Define Item Categories
Regards,
Srilatha.

Insert Field greyed out

Using CR as bundled with dotnet 2003. Trying to edit an existing report that has been fine for years.
Toolbox is empty except for text, line and box objects.
Right click in designer, select "insert", but "fields" is greyed out
Had problem with "invalid keycode" when trying to display anything for editing, but fixed that by re-registering.
Any clues anyone?
Thanks
Chris

Try to reinstall the CR part of .NET 2003. Apply SP 1:
https://smpdl.sap-ag.de/~sapidp/012002523100009301312009E/crnet11win_en.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

I want to make a field grey out in a standard tcode AS02

Similar Messages

Maybe you are looking for