I want to make a list of my log in names and passwords that are stored in my Firefox profile to give my wife

Wife and I are old. I am afraid if I die my dear wife won't be able to access any of our joint bank and investment accounts.
All I want to do is provide a list for her. I can see the list in the Security window. I highlighted the list, but cannot copy or print it.
Can someone help, please.
Firefox 3.6, Windows 7 64 bit
Jim

This online community is GREAT!
I followed the info you sent and was able to exactly what I want to do.
From an old man (70), thank you so much.
Jim

Similar Messages

  • "Mac OS X wants to make changes. Type an administrator's name and password to allow this. Mac OS X wants to use the "system" keychain."

    I just installed a Belkin router to my computer so I can connect to my apartment building's internet. EVerything is working fine, the internet works. But I'm now getting this message and I'm not sure what to do? Help?

    I just solevd it :-)
    I went to keychain access and reset my default keychain ...
    After a system reboot and some certificate reimports, everyting is now fine.
    Maybe my key chain got messed up?
    Anyway, a reste on the keychain worked a treat ...
    - chris

  • I'm on a web site that requires a user name and password to enter the site., but Firefox has never asked me if I want to save this info. Is it possible to do this even though Firefox never asked me?

    This is the only site that Firefox has not asked me to save user name and password.

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    See also:
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

    I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
    Can you help me ?

    The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what?  Or is it the brackets that makes the separation between the three pieces of data?
    If it is always a single tab, that makes it really easy.  All you have to do is find/replace the brackets with nothing (as Wayne said)
    If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
    If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
    If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

  • I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad

    I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad....
    Please Help me.
    I want to make a numpad of my own from which i can set the text but i want the user to tap in between the text..

    You seem to stop the while loop to run the following code, then the program ends. Are you running this using the "continuous run" button????
    You need one big while loop containing the acquisition, then you build up the history data in a shift register. Clicking "save" will save the data, but not stop the loop.
    Why did you place a time-control in the FOR loop??? This is just post-processing so it should just do it without any delays. I don't understand the logic in the FOR loop. You are appending arrays, but then you delete the first element at each iteraction constantly trimming data from the beginning of the appended array. Then you autoindex at the output tunnel heavily duplicating all data. Ths make s no sense!
    Can you explain how you want you data saved?
    Message Edited by altenbach on 12-16-2005 11:20 AM
    LabVIEW Champion . Do more with less code and in less time .

  • Does Firefox have a feature like the software named Robo-form, where like if you wanted to go to your gmail, you could click on one thing, and not have to inter user name and password every single time?

    Some times in Firefox I see pop ups where Firefox is allowing you to make Firefox remember a password or some such thing like that.
    I want to go to an account or web site where I have already registered, type in my user name and password and then before I log in, have Firefox remember my log in information, so that in the future I could go to a folder let's say, that has a list, and just click on the one item, spending less time logging in at places.
    Is this something Firefox does, or do I have to say, use a software like Robo-form?

    https://support.mozilla.com/en-US/kb/Remembering+passwords

  • HT200183 If I wanted to include apple loops in the assets of Logic project folders that are part of a tutorial available for download on a paid educational website would that be ok?

    If I wanted to include apple loops in the assets of Logic project folders that are part of a song that follows a tutorial available for download on a paid educational website would that be ok? No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems. I understand that they are royalty free and you can include them in your music no problem but the individual loops would be in the audio folder if I saved all the assets to the project file.
    Also, would it be ok to include screen shots I take myself of apple programs in my downloadable content?
    Just trying to figure out exactly how I should go about it to avoid any legal issues.

    Hi
    trainedmind wrote:
    No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems.
    My gut reaction is that you may well run into © issues if you re-distribute the original AppleLoops.If your customers are paying for the training, they are also paying for the content you provide, so I feel that you would be re-selling the loops.
    Given that anyone who has a copy of Logic would likely have installed all the loop content, there should be no need to distribute them with the project files. Alternatively, make your own loops.
    CCT

  • How do you get a list of your contacts nick names and their phone numbers on line and print them out?

    How do you get a list of your contacts nick names and their phone numbers on line and print them out?  I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site.  Does anyone know how to do this?

    Log into your online account. In the, 'I want to', box type, Manage Contacts.
    Place your cursor over any contact, a pop screen will appear with the option to print your contacts

  • Type an administrator's name and password to allow Mac OS X to make changes

    I just upgraded to Snow Leopard and now I am constantly receiving the following error message. I have seen several similar posts, but none with this Kaychain/Application. Please Help!
    "Type and administrator's name and password to allow Mac OS X to make changes.
    Mas OS X wants to use the "System" keychain.
    Username:
    Password:
    Details: Keychain: System.Keychain
    Application:PubSubAgent

    Thanks for your help. I tried that but it did not work, the error message still pops up and I am now having to reenter passwords in things like ICAL and Mail. I also tried the Keychain repair and it repaired something but did not fix the problem. Do you have any other ideas?

  • Type an Administrator Name and Password to allow lpadmin to make changes.

    We have a lab full of PowerPC G5 Towers running 10.5 off a PowerPC G5 tower running 10.5 Server. We are using Open Directory and AFP to allow students to login to Network Accounts from Local Workstations. After Archive and Installing two of the G5 Machines and updating them, We encountered the error "Type an Administrator Name and Password to allow lpadmin to make changes." and it freezes up and doesn't allow us to enter the password or username or even move the mouse.

    To use the solution in the link above in this case, here's one way to go about things:
    - Restart while holding down command and s at the same time to boot into single-user mode.
    - Use the following commands to mount the filesystem (these are also listed on the screen when you start up):
    $ /sbin/fsck -fy
    $ /sbin/mount -uw /
    - You're going to need the root password, so if you haven't already set one, type 'passwd', hit return, and set one.
    - Load Directory Services:
    $ launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist
    - Run the command mentioned in that other post, entering your root password when prompted:
    $ dseditgroup -o edit -p -a admin -t group _lpadmin
    - You may need to run it twice, because the first time it may say something about upgrading your groups or something like that.
    I hope that helps. It worked for me on multiple machines affected by this problem.
    Greg

  • HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

    I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
    I'd also like to make address labels and don't know where to find that either

    You would make address lables with the Contacts app.
    If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

  • Failed to send email. failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly.

    I get the message listed above when I try to email pics. It asked me to set up an email account. I chose gmail. It asked for a password. I'm assuming it was asking for my email password. And yes I may have typed it in wrong, but how do I "please make sure you have entered the email account and password correctly" ??? I can't find out how to get back to that point?

    Have you checked your Gmail in-box? See if this helps:
    https://forums.adobe.com/thread/1642613

  • When i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot

    Question
    when i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot edit

    Quote from the article.
    Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
    So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
    The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
    In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files.

  • "Cannot login. Make sure the name and password are correct."

    I've just created a new iAS6 SP4 instance on a new machine (new local LDAP, SPARC Solaris8). But when I startup a ksvradmin tool I get the msg: "Cannot login. Make sure the name and password are correct."... and I cannot access to admin my new instance :-(. I don't understand about what user and what pw it tell me. I did this instalaltion on other machine by the same way but without any problem. On my other machine I don't have to identificate me when I use the ksvradmin tool.

    Sorry I wasn't being very clear either.  I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004.  Once you know what environment variables have changed you can go the control panel to set them.  Some of them will may be new variables that you will need to define.  Others may already exists in which case you want to append to them.
    The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath.  You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat).  This batch file would have two lines.  One to run VCVARS32.bat and the second to run XMATH.bat.  If you are not familiar with batch files there are a lot of resources on the web about them.  In this case all you would need is:
    <path to vcvars32.bat>\vcvars32.bat
    "C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat"  -v 71.6
    The -v 71.6 is optional.  it specifies to specifically open version 7.1.6.  If you leave it off the newest version will be opened.
    Carl L
    National Instruments

  • HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

    I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

    It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
    The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
    The requirements for Mountain Lion and Mavericks are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
      If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

Maybe you are looking for