I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?

I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?
I had to format it after I bought it so that it could work with windows and Mac and I'm afraid that if I erase the info in the hard-drive, the format will also change. Is that possible to happen? Or the format will stay the same?
Thank you

Do you want to continue to use it to share and store files between Windows and NTFS and Mac which uses HFS?
Maybe you need another drive. I would never have only one backup and one "live" data set.
you probably installed something, whether it is current or well supported or not, that came with the drive to allow writing to NTFS.
TimeMachine has to use HFS only and use Apple GPT (GUID) format.
sometimes erase changes a drive to GUID when you click on the raw hard drive name in Disk Utility. other times you can erase a volume and leave the partition format type as is. The wording use to be clearer when people knew when and how to initialize, format and setup a drive. And sometimes a message on the screen says it will be only launches Disk Utility and not to the PARTITION tab to make changes.
In addition to TimeMachine, having a clone of your system or data or both can be very useful as well. Drives fail.
And with a MacBook Air you probably have a smallish internal hard drive and might need to store media files and data on another drive to supplement the internal SSD.

Similar Messages

HT4623 I'm trying to download ios5 to my iPad and I tried following the steps but in my setting under general there is no software update option. What do I do

I'm trying to download the ios5 to my iPad and I was following the instructions on here but when I go to settings and general I don't have a system update option. What do I do

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                      iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                      iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1
iPad 3                                          iOS 6.1
iPad 4                                          iOS 6.1
iPad Mini                                     iOS 6.1
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Hi all. I want to make audio chat with my brother. I use iChat on my MBP. He uses Gtalk on his windows PC. The problem is that the audio icon is gray. Is there anyway? Can iChat make voice chat with Gtalk on windows?

Hi all. I want to make audio chat with my brother. I use iChat on my MBP. He uses Gtalk on his windows PC. The problem is that the audio icon is gray so I cannot start audio chat. Is there anyway? Can iChat make voice chat with Gtalk on windows or not? I am confused.

HI,
You need to satisfy several things along the way
Account type
You need to have a Jabber or Google mail Account your self.
If you have a Google Mail Account then it needs the "Talk" option Enabled in your Google account Settings ( A Facebook with "Chat" enabled is also a valid Jabber ID to use in iChat).
Connection Method
This is about which apps can connect to which apps for Video ro Audio to work.
iChat Video when using a Jabber account is iChat to iChat Only.
iChat connects using a process called SIP (Session Initiation Protocol)
Jabber based Apps if they have an A/V module connect using protocol called Jingle.
Needless to say Google do their own version of this that is written in to the web Browser Plugin that allows Video Chats (there are PC and Mac versions), and in the PC app called GoogleTalk.
However it is also not that compatible with other Jabber apps.
See Jingle here
This claims, now, that Google had a hand in writing the Protocol.
Also in the "Clients Supporting Jingle" list many more version of Google products are mentioned with extended info. (it suggests that someone at Google has been editing the page).
Can iChat make voice chat with Gtalk on windows or not?
The specific answer to this to be clear is NO.
We are talking about different Apps (or web Browser Plugins) using different Internet Protocols that are not compatible.
The simplest thing is to get the Web Browser Plugin (However there can be issues with the Flash Plugin)
At one time Google used Flash to do Video Chats and it would seem their Plugin is very close to this part of Flash.
See the Known Issues and the "Google Talk Plugin Disables iSight On Mac" item.
Options
Use a Web Browser yourself with the Plugin.
Use a Flash Base Site such as MeBeam (Flash has to be enabled in your Browser and the instructions are simple on the page)
Try to find a Jingle capable Mac Jabber Client (app) ( I have not found one).
9:42 PM Monday; July 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS1702 I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also can't use iCloud with Pag

I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC, although I purchased extra storage in order to do this.

If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.

Trying to attach pdf files to emails I'm sending to myself. Instead of attaching the file, it copies the text. I want the file so I can have it on my iPad. I've been able to do this in the past, but not the last two tries. What's wrong? Thanks.

Trying to attach pdf files to emails I'm sending to myself. Instead of attaching the file, it copies the text. I want the file so I can have it on my iPad. I've been able to do this in the past, but not the last two tries. What am I doing wrong? Thanks.

You aren't doing anything wrong.
If the PDF is short enough, your iPad Mail app will display the text as part of the mail.
Actually it is still an attachment.
Tap and HOLD on the text and you should see options to "Open In..." that will allow you to open the PDF in most PDF readers such as iBooks, GoodReader, etc.

I want to make a note and put in a folder like we just place a notepad by right clicking in windows,how should I create a note in a folder in mac pro ...?

I want to make a note and put in a folder like we just place a notepad by right clicking in windows,how should I create a note in a folder in mac pro ...?

There's no "New File" shortcut in Finder on Macs, so you have to launch the application you want (eg TextEdit), create your document, and save it there. There are workarounds using Terminal (the touch command), AppleScript/Automator, and using third-party launch programs like Quicksilver, but natively, it can't be done.
Matt

I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

I am unable to register, I want to talk to the helpline, but I am currently in China, I will pay, I don't care what it costs, how can I do this?

You are unable to register what ? If you are in China then you can only use the China iTunes store (you have to be in a country to use its store), if you want to contact China iTunes Support then you can do so via this page : http://www.apple.com/cn/support/itunes/contact/

I wanted to empty the trash but I get an error code -8003 and I can't continue. What's up?

I wanted to empty the trash but I get an error code -8003 and I can't continue. What's up?

Hi pete down under!
Here is an article that addresses this issue and should be able to help you resolve it:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

Name: Vimeo HD Encode
Description: No description
File Extension: mov
Estimated size: 2.3 GB/hour of source
Audio Encoder
          AAC, Stereo (L R), 44.100 kHz
Video Encoder
          Width: 1920
          Height: 1080
          Pixel aspect ratio: Square
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls On:
                    Retiming: (Best) High quality Motion Compensated
                    Resize Filter: Statistical Prediction
                    Deinterlace Filter: Best (Motion Compensated)
                    Adaptive Details: On
                    Antialias: 0
                    Detail Level: 0
                    Field Output: Progressive
          Codec Type: H.264
          Multi-pass: On, frame reorder: On
          Pixel depth: 24
          Spatial quality: 75
          Min. Spatial quality: 25
          Key frame interval: 30
          Temporal quality: 50
          Min. temporal quality: 25
          Average data rate: 5.12 (Mbps)
Compatible with Mac
My video in the timeline is 1920 x 1080 / 23.98 fps
I've installed Toast and photoshop elements recently, i also updated my apps the other day.
I have had this problem before the updates of the apps though

HT201210 i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the devi

i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the device withpc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

I can only backup the datafiles but not the control files and SPFiles

Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qian

the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen

Hi have just bought a Sony Xperia J and am not able to tether my ipad as I did with my Nokia C3. Why? What do I have to do to solve the problem so I can tether to my Ipad?

Hi have just bought a Sony Xperia J and am not able to tether my ipad as I did with my Nokia C3. Why?
What do I have to do to solve the problem so I can tether to my Ipad?
Is this phone another of the things that Apple does not support? How do I know before I buy a phone that it will be supported?

How are you attempting to connect them?
Looking at the Experia J features it does seem to support Wifi Hotspot, but there is no mention of a Bluetooth hotspot. Different phones offer different things.
The iPad issues the message, because there doesn;t seem to be anything it can do with it. But this is not something apple is blocking its more a limitation or a non present feature of the phone.
From the Manual which I assume you've read through:
To share your phone’s data connection as a portable Wi-Fi® hotspot
1 From the Home screen, tap .
2 Find and tap Settings > More… > Tethering & portable hotspot.
3 Tap Configure Wi-Fi hotspot.
4 Enter the Network SSID for the network. Tap the Security field to select a
security type.
5 If required, enter a password.
6 Tap Save.
7 Mark the Portable Wi-Fi hotspot checkbox. The phone starts broadcasting its
Wi-Fi® network name (SSID). You can now connect to this network with up to
8 computers or other devices.
8 Unmark the Portable Wi-Fi hotspot checkbox when you want to stop sharing
your data connection via Wi-Fi®
When that is set up, you can use your iPad to look for the Wifi network the phone is providing and connect to it as you would any wifi network.
http://www-support-downloads.sonymobile.com/st26/userguide_EN_ST26_1268-7245.1_A ndroid4.0.pdf
http://blog.clove.co.uk//wp-content/uploads/2012/11/Sony_Xperia_J_ST26_User_Guid e.pdf

My 4 generation ipod touch is syncing from itunes, and every time it syncs it has to sync all the songs but on the ipod it says no content? What to do?

My 4 generation ipod touch is syncing from itunes, and every time it syncs it has to sync all the songs but on the ipod it says no content? What to do?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Hi, I'm doing a poor man's morph project on my motion 4 . It works perfect while on motion , but when I try to import it to tcp it will transfer the photos but not the optical flow fx. what am I doing wrong?

Hi I don't know if I was able to send this question before but here it goes again. I'am doing a poor man's morph project on my motion 4 program, and it works great while in Motion, but once I try to import it to fcp, it will import the photos but not the optical flow fx, what am I doing wrong? I appreciate you help

Decided to use cmd A to select all the icons on the desktop and then looked for a right click option. There it was - the option to move to a folder. I now have them all in this folder which tells me it holds 157 items. Now you know why I needed to know LOL
Thought it might be of help to someone.
Cheers Mally

I want to make a TimeMachine backup in a new hard-drive I just bought. It says it has to erase the info but as the drive is new there's no info in it, so what it is going to be erased?

Similar Messages

Maybe you are looking for