I want to make an iDVD with 9 menus. Please help.
I want to make a DVD with 9 menus. There are 10 movies that will be on the DVD. Two of the movies
would just have the title. Eight of the movies would have multiple chapter markers. There would be an opening
menu. The opening menu would have 3 buttons on it. One would play a short movie. The other two would go to separate
menus. Each menu would have 4 selections. One selection would play a movie. The other 3 selections would go to separate
menus. Each final menu would have the play button and scene buttons.
Any help would sure be appreciated, or if you could steer me to a tutorial or article that would work. It may be that this is too many
menus. In trying to simplify the DVD, I may be making it too complicated. If I need to I will look to a more powerful DVD creation software.
I am working on iDVD11
Thank you
I think I have it figured out.
Thanks
Similar Messages
-
When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?
Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
i will be happy work for apple really andi want to make a deal with the iphone i am american person from tx but now i am in ukraine so i want to buy a 1000 iphone 5 and cash u can send it to me in the airport in ukraine in kive city with a man so he give me the iphone and i give him the money cash and i want to make my name a business man and if i can work with apple
yeah. Good luck with that.
-
I want to make a purchase with my charge card. But each time I buy a song it takes it immediately off of the credit I have in my account from a gift card. How can I change it to charge me for a purchase instead of taking it out of the credit I have in there?
You don't change it.
It will use any account balance first, once it is gone, then it will go to your credit card. -
Hi all. I want to make audio chat with my brother. I use iChat on my MBP. He uses Gtalk on his windows PC. The problem is that the audio icon is gray so I cannot start audio chat. Is there anyway? Can iChat make voice chat with Gtalk on windows or not? I am confused.
HI,
You need to satisfy several things along the way
Account type
You need to have a Jabber or Google mail Account your self.
If you have a Google Mail Account then it needs the "Talk" option Enabled in your Google account Settings ( A Facebook with "Chat" enabled is also a valid Jabber ID to use in iChat).
Connection Method
This is about which apps can connect to which apps for Video ro Audio to work.
iChat Video when using a Jabber account is iChat to iChat Only.
iChat connects using a process called SIP (Session Initiation Protocol)
Jabber based Apps if they have an A/V module connect using protocol called Jingle.
Needless to say Google do their own version of this that is written in to the web Browser Plugin that allows Video Chats (there are PC and Mac versions), and in the PC app called GoogleTalk.
However it is also not that compatible with other Jabber apps.
See Jingle here
This claims, now, that Google had a hand in writing the Protocol.
Also in the "Clients Supporting Jingle" list many more version of Google products are mentioned with extended info. (it suggests that someone at Google has been editing the page).
Can iChat make voice chat with Gtalk on windows or not?
The specific answer to this to be clear is NO.
We are talking about different Apps (or web Browser Plugins) using different Internet Protocols that are not compatible.
The simplest thing is to get the Web Browser Plugin (However there can be issues with the Flash Plugin)
At one time Google used Flash to do Video Chats and it would seem their Plugin is very close to this part of Flash.
See the Known Issues and the "Google Talk Plugin Disables iSight On Mac" item.
Options
Use a Web Browser yourself with the Plugin.
Use a Flash Base Site such as MeBeam (Flash has to be enabled in your Browser and the instructions are simple on the page)
Try to find a Jingle capable Mac Jabber Client (app) ( I have not found one).
9:42 PM Monday; July 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I wanted to start a Digital Printing business please help with Photoshop
Hi I wanted to start a digital printing business please help me with photoshop.
I've never used the program before and dont know how to design either. I got the trial edition of the photoshop extended and do I need to take some form of lessons or how do I start learning photo shop to do things like Banners, posters, signage, digital printing in other words...Before you invest any money in a startup business you MUST make sure you are able to compete with the competition. What you are saying is a bit like - I want to start a bakery but I cant cook and don't know how to use an oven - this might sound negative but try imagine the taste of the cakes....
If you really want to enter into the market your best bet would be to hire a designer/someone who knows about printing/profiling etc as printing can be complex, especially when you bump into technical problems.....You can always learn along side him/her. I don't want to put you off so GO FOR IT!!, but it is tough out there at the moment. -
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Is there a way to color one thing in a black and white photo. Example: I have a picture of a tulip field and I want to make it black and white - which I have already done - but I want to make one single tulip red. Help?
No, you'll need an external editor for the job:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto. -
I bought Macbook air at 1 moth ago.
But So unfair……New Macbook air…….
I want change new one or Refund me
Please help me..It is really not relevant what you buy; especially with electronics, your item is "outdated" as soon as you get it home because there will always be a newer, bigger, better things out there.
Does your machine no longer do what you need it to do? If so, sell it, and buy a new one. If it does what you need, then keep it and work with it.
Apple allows for returns within the first 14 days; you can try going to a store and seeing if they will make an exception, but I would not expect it. -
trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ? Thank you
There is a version of Firefox 4 available for PPC Macs:
TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
Macs that supports both Mac oS X 10.4 and 10.5. has been released.
Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
PC with the fourth beta of Firefox 4.
TenFourFox uses almost all the same code as Firefox 4 and has nearly all
the same features, including faster JavaScript, WebM video, and HTML 5
and CSS 3 support, as well as new and emerging Web features, but with
the code needed to keep your Power Mac functional and fast. Out of beta
and it's ready for action, versiob 4.0.1 is a performance, security and
stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
-ation for WebM and browser graphics, and G5 JavaScript acceleration.
For more information, visit:
http://www.floodgap.com/software/tenfourfox/
Source: from http://www.applelinks.com - posted April 25, 2011)
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html and
http://www.bbc.co.uk/news/technology-11673384 -
Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
thanks
MujeebSee options below:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
I downloaded music to my ipod shuffle from itunes and it still saying saying download music from itunes. But there is music on it when I hook it to the computer but it want play on the shuffle. Someone please help me.
Hello Rod2174,
I'm sorry to hear you are having issues with your iPod shuffle. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues transferring music to your iPod or playing music that is on your iPod, you may find the information and articles linked from the following page helpful:
iPod shuffle - Apple Support
Sincerely,
- Brenden -
Radio button with javascript - - Please HeLP !
Hi,
I have the following code
My question is:-
Q : Clicking on Submit button. gives a javascript
message "Please make a selection" even though when I selected a radio button
I have haspmap which displays possible answers to a question in a radiobutton type. When submit is prssed, I like to check whether a selection is made or not. and if not, I want a message shown. And when selected. I want page to prcede to processSurveyInfo.do
Please help
<script language="javascript">
function checkRBtn()
var name = document.forms[getNetuiTagName("studentmultpChcform", this)][getNetuiTagName("rbtn", this)].value;
if ((name==null) || (name=="Undefined")) {
alert("Please make a selection");}
else {
document.forms[getNetuiTagName("studentmultpChcform", this)].method="POST";
document.forms[getNetuiTagName('studentmultpChcform', this)].action="<netui:rewriteURL URL="/TrainingActivity/Administration/SurveyFile/processSurveyInfo.do" />";
document.forms[getNetuiTagName("studentmultpChcform", this)].submit(); }
</script>
<table align="center">
<tr>
<td>
<netui:button value="Next-->" type="submit" styleClass="commonButtons" onClick="checkRBtn(); return false;" tagId="nq"/> </td>
<td>
<netui:button value="Finish" tagId="finbtn" action="fwdfinish"/> </td>
</tr>
</table>
<table align="center">
<tr>
<td>
<netui:button value="Next-->" type="submit" styleClass="commonButtons" onClick="checkRBtn(); return false;" tagId="nq"/> </td>
<td>
<netui:button value="Finish" tagId="finbtn" action="fwdfinish"/> </td>
</tr>
</table>
please help me out.
Thanks
-Raza-You need to write a custom script and it's location will depend upon when you want the script to execute.
Radio Buttons and Check Boxes have a string value of "Off" when none have been selected and take the value assigned to the field when checked. -
Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
I have formatted my Hard Drive, and i want to restore my bookmarks in firefox, please help!
i have formatted my Hard Drive due to virus slowing down the computer, and oh!, its OS is XP. i want to restore my bookmarks in firefox, please help! . Good Day!
Hi,
Did you backed up these ones on an external support or synced on a firefox sync account ?
Maybe you are looking for
-
DataBase unavailable and Mirrored Db role has chnaged.
Hello All, We got below errors in our principal and Mirror db servers. 1) The mirroring connection to "TCP://servername.domain.com:5022" has timed out for database "Db name" after 10 seconds without a response. Check the service and network connecti
-
class MyDragListener implements View.OnDragListener { Drawable enterShapeAcp = getResources().getDrawable(R.drawable.shape_droptargetacp); Drawable enterShapeRej= getResources().getDrawable(R.drawable.shape_droptargetrej); Dra
-
I seems to have problem with the preview application. i can't view any files that require to use with it. it says "preview application could not be open." error 1222. what happen? i only bought this macbook for like 2 weeks and how come this is happ
-
Retrieve underlying SQL query for deski report via java SDK in BOXIR2
Hi all, I am trying to retrieve underlying SQL queries of a deski report in BOXIR2. However I find the error as oDataProvider = oDocumentInstance.getDataProviders().getItem(i1); System.out.print(oDataProvider.getName()); oSQLDataProvid
-
Error at the time of Terminating Service Contract
Getting the following error at the time of terminating the contract in Oracle Service Contracts Module. OKC_CONTRACTS_REQUIRED_VALUE(COL_NAME=QP CALL FAILURE Routine"QP_PREQ_GRP.INSERT_LINE_ATTRS2 ORA-01400: cannot insert NULL into ("QP".QP_PREQ_LINE