I want to make the black list for phone call in as...

I am in trouble, sometime some of the unwanted person call me, and it so bad for me. I want official and stable program free or pay all i want.

Incoming call block? There isn't any way. Only if your operator allows that. Ask them. They usually have a paid service to block unwanted calls.

Similar Messages

Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
www.apple.com/feedback

Reject list for phone calls

I been getting unknown calls, and i wanted to know how do i set a reject list for these calls?

You don't.
You can check with your wireless provider and see if they offer such a service.

How to set iPhone Bluetooth to be just for phone calls?

Is there a way to setup an iPhone 4s/5, iOS 6, to use the bluetooth only for phone calls?
I don't want music, youtube, google maps, or any app to go thru my car speakers. Phone calls work fine because the car will switch to Bluetooth audio automatically for those. I usually have my car audio set to radio so no apps are audible in the car unless I manually switch the car to Bluetooth Audio but then I can't listen to the radio.

The only way around this, depending on the car system,
is connect the iPhone to the unit via USB.
At least with my Ford SYNC system, I can pair via
Bluetooth and connect the USB and select USB audio
on the Ford unit and in the Music app on the iPhone.
Doing this, all phoner functions go via Bluetooth and
everything else is over USB.
Perhaps your car system supports something similar
or not. If it doesn't, there is nothing you can do.

Cannot resize the albums in album view in Itunes 11. For those of us with large libraries (160gb), this is extremely frustrating. I want to make the artwork smaller. This seems to be a serious oversight.

Cannot resize the albums in album view in Itunes 11. For those of us with large libraries (160gb), this is extremely frustrating. I want to make the artwork smaller. This seems to be a serious oversight.

I agree.
It was very useful to reduce everything to small and quickly scan down looking for missing artwork.
Particularly useful when I only connect to the machine with iTunes via screen sharing, so everything can be a bit slower to scroll through at times.
In fact, itunes 11 when used purely as a server for Apple TV etc is a downgrade in usability IMO, as they've got rid of some of the useful views that helped me manage my library remotely.

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb. Is there a way to be more precise in reaching but not exceeding 70 kb?

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can opnly resize using the available options and file size is not one of them
LN

TFS Workitems:Bugs : I want ot select different lists, from the global list, for fields basd upon user group

Hi,
I am customizing the bug workitem workflow.
I want ot select different lists, from the gllobal list, for fields basd upon user group
I am aware that I can use "when" clauses in the allowed/suggested values of the field.
My question is : how do I get the group(s) that the current user is in and how do use this to select different lists?

Hi!
You can not do this through standard way. You must to create the custom work item control:
http://witcustomcontrols.codeplex.com/
And get the user group through IIdentityManagementService.
IIdentityManagementService IdentityService = _workItem.Store.TeamProjectCollection.GetService<IIdentityManagementService>();
TeamFoundationIdentity _curid = null;
_workItem.Store.TeamProjectCollection.GetAuthenticatedIdentity(out _curid);
string _group = "Admin";
var _gr = IdentityService.ReadIdentity(IdentitySearchFactor.AccountName, _group, MembershipQuery.Direct, ReadIdentityOptions.None);
if (_gr.Members.Where(s => s.Identifier == _curid.Descriptor.Identifier).Count() > 0) return true;

I currently have a licensed version of CS6 for my PC but I want to make the switch over to MAC soon. Is there a less expensive way to have CS6 without having to buy it all over again?

I currently have a licensed version of CS6 for my PC but I want to make the switch over to MAC soon. Is there a less expensive way to have CS6 without having to buy it all over again?

Order product | Platform, language swap
Mylenium

I want to make the keyboards numerical keys shortcuts for buttons.

I want to make the keyboards numerical keys shortcuts for buttons, without a modifier key is this possible ? e.g. press '1' on the keyboard button 1 is pressed on the GUI.

The number keys are not valid hot keys for our controls. The easiest workaround would be to use fhe F keys instead (F1 for button 1, etc.) However, if you are set on the number keys you could implement this with a panel callback. You could have a panel callback that monitors all keypress events and then, depending on the key pressed, calls the code that would be called with a button press of the button for that key.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Help make the reading list (safari) go away --FOR GOOD (not just unchecking preferences--that is not a solution)

The READING LIST feature on safari is soo freakin annoying. Even after unchecking it in bookmark preferences, everytime I signin someplace, I still see it invisibly recording my information. The reading glasses icon isn't in my bookbar anymore, but I see a small puff go up in the left side of my screen. How can we make this stop? I even confirmed it's true, because AFTER turning it off under preferences, when I went back to turn it on just to check hours later, I was horrified that it still kept collecting information through sites I visited. This feature's invasive and irritating. Is there a way to terminate the reading list for good???

You can turn off Reading List by clicking the reading glasses icon.

I want to make a speakable command for the mute key.

I want to make the mute fearute a speakable command. If I could find a way to make a keyboard shortcut with the command key, I could do the rest. Any suggestions?

I don't get the "Use Artboards" dialog box option when I try to save. It is grayed out.

Is there a way to color one thing in a black and white photo. Example: I have a picture of a tulip field and I want to make it black and white - which I have already done - but I want to make one single tulip red. Help?

Is there a way to color one thing in a black and white photo. Example: I have a picture of a tulip field and I want to make it black and white - which I have already done - but I want to make one single tulip red. Help?

No, you'll need an external editor for the job:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

I have an old macbook which is running on OS X 10.6.8. I want to make the switch from moblie me to icloud. I went to download the new OS X Lion so I can connect and it is telling me I need a Core 2 duo. I only have a Core duo on this mac. What to do?

I have an old macbook which is running on OS X 10.6.8. I want to make the switch from moblie me to icloud. I went to download the new OS X Lion so I can connect to the icloud and it is telling me I need a Core 2 duo. I only have a Core duo on this mac. What to do?

Unfortunately there is little you can do, Lion will not run on your machine.
However it is possible to access some features of iClould while staying with SL. If you go to iCloud you will see the web interface for the cloud.
Some but not all functionality is here. Check it out and see if it meets your needs.

Filter the participant list for reassign (or req info) in BPM Workspace

hi every one.
can anybody lead me if it is possible to filter the participant list for reassign (or req info) in BPM Workspace?
i do not want to participant see all the users and groups that i define in jazn file in WLS console.
in the other word, i want each role to see only special other roles or users.
what is the solution.
thank you very much indeed.

Hi,
Check the Condition which u have given.
*if not s_badat is initial and not S_ekgrp is initial and p_bsart is initial.
first select data all with respect to badat
if sy-subrc = 0.
if not S_ekgrp is initial
delete it_eban where ekgrp not in S_ekgrp.
similary go on which u donot want.
endif.
endif.
Regards.
Arbind

I want to make the black list for phone call in as...

Similar Messages

Maybe you are looking for