I want to open icloud a/c on my window 7.

i want to open icloid a/c on my pc window 7.i have downloaded contorl panel 2.1...
when i signed in control penal it give me massage that this is your apple id,not icloud a/c
pl.guide me.
Fichadia Ramniklal

Welcome to the Apple Support Communities
If you are using iCloud for the first time, you have to do it on an iPhone, iPod touch, iPad or Mac, but you can't register on iCloud on a PC. See > http://www.apple.com/icloud/setup

Similar Messages

  • I am unable to open Icloud on my PC with Windows 7 but have it installed

    I am unable to open Icloud on my PC with Windows 7 but have it on my Iphone & Ipad working OK
    Please help

    The menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.

  • I want to open a folder in a separate window by clicking on it.  For some reason when I click on a folder it just replaces the one I was just in.  I want them both to be open at the same time without having to go through several steps.

    I want to open a folder in a separate window by clicking on it.  For some reason when I click on a folder it just replaces the one I was just in.  I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time. 

    Eric, thanks that works but seems like an extra added step also to do it that way.  I've got to move and organize a ton of files and I'm looking for a easy way to get this done.  I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps.  Not sure why these newer operating system seems more confusing and less user friendly than what they used to.  In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other.  Seems like I'm going through several extra steps now to do a simple task. 

  • Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?

    Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?
    == This happened ==
    Every time Firefox opened
    == Today

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • I want to open links & sites in a new window and not a new tab, how can I do that?

    when I click on a link I want to open a new window, instead to open a new tab.

    Uncheck: Firefox > Preferences > Tabs: [ ] "Open new windows in a new tab instead"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Mount_webdav: Error Code -8060 occur, if i want to open the share in my finder window

    Hello,
    since the update from 10.6 to 10.7.1 i cant use some webdav shares anymore.
    Every time when i mount our webdav share and open it afterwards in a Finder window the error
    The operation can't be completed:
    An unexpected error occurred (error code -8060)
    does anyone know something about this or a similar problem?
    best regards,
    martin

    Hello,
    Last night I upgraded my NAS firmware (Netgear Stora) and now I have exactly the same problem.
    The Admin account Finder locks when trying to mount the AFP share. If I force unmount (sudo umount -f ...) then I see the same Finder error message code 8060. Any other account (and any other Mac) mounts the same share OK.
    Strangely, manually mounting the share via Terminal works perfectly. So does SMB mounting via the Finder.
    I've tried deleting all Finder and AppleShareClient preferences, with no effect.
    For some reason the Finder in the admin account can't complete the mount (permissions maybe?).
    Regards,
    Mick

  • Do NOT want to open link in a new browser window - iWeb '09

    I do not want links that navigate around my website to open a new browser window every time. Right now, for example, From my main page, I click a link to a secondary page, it opens it in a new window, I then click the link back to my main page, and it opens in a new window. I now have 3 windows open.
    I am not using the navigation bar as it set ups with iWeb (I have it hidden). I am using hyperlinks I attached to text boxes. Would this problem be remedied if I was using the navigation bar? If so, is there anyway to edit the appearance of the navigation bar and it's location on the page?
    Primarily though, I would like my text hyperlinks to just navigate my page and not open in new windows.
    Thanks!

    And that's the way it should be.
    If you look at this page about navigation you'll see that the main navigation uses eternal links and the sub navigation internal ones....
    http://www.iwebformusicians.com/WebMusic/Navigation.html
    Try the troubleshooting steps under "Fix iWeb" here.....
    http://www.iwebformusicians.com/WebMusic/iWebTips.html

  • Thunderbird wants to open messages, each in a new window; deletes more than one message

    -- and does,most of the time! Whether it's one message, half a dozen, or 36 (as last night) Thunderbird is now entirely too sensitive to open messages in a new window. When I delete a given message, often as not one or more messages go glimmering with it, then I have to go to the trash folder and retrieve the message I did _not_ want to delete.
    What if one of those messages that opens in a new window contains a virus? Granted I have a good, powerful antivirus but I'd appreciate having my computer time to myself -- not having to deal with glitches and viruses.

    Again about the mouse, huh? Why can't you admit it's in the software? After the last time, remembering about the advice on the mouse, I tried three different ones. It is NOT the mouse. Fix the software the way it used to be and keep it that way, and the problem will be solved. Meanwhile I'll be researching other email clients. I've HAD it!

  • I want to open private browser in a separate window without shutting the old inprivate window, how?

    I have no more details

    Hello nona1234, you can not do that with your 13.0 firefox version, firefox from 20 version and above have the option to open private browsing mode per window.
    see the change : http://www.mozilla.org/en-US/firefox/20.0/releasenotes/
    see : [https://support.mozilla.org/en-US/kb/update-firefox-latest-version Update Firefox to the latest version]
    thank you

  • I have created a folder in "Bookmarks Toolbar" and I want to open all sites saved into the folder into separate window, instead of opening them into tabs, how do i do that?

    I want to open multiple sites in NEW firefox window, as soon as I click on the folder from "Toolbar menu". I can see a option there "Open all in tabs". Is it possible to set one more option "Open all in new windows"

    THANK YOU! So easy, now I feel stupid. ;)
    Sorry, Firefox 4.0 is driving me nuts in many ways, this is just one of them.

  • Open that jspx page in new window using commandLink

    Hi All,
    I'm working on adf application.I'm using jdeveloper 11.1.1.5 version.I want to get the attribute value of current row and pass it to jspx page.And i want to open that jspx page in new window.I tried like following:
    <af:column id="resId1c7" align="center" width="50">
    <af:commandLink actionListener="#{bindings.setCurrentRowWithKeyValue.execute}"
    text="MSG-ID"
    disabled="#{!bindings.setCurrentRowWithKeyValue.enabled}"
    id="cl1"
    action="dialog:Confirm" windowHeight="600"
    windowWidth="800" useWindow="true"
    partialSubmit="true"/>
    </af:column>
    And in my faces-config.xml i add the navigation rule like this.
    <navigation-rule>
    <navigation-case>
    <from-outcome>dialog:Confirm</from-outcome>
    <to-view-id>/AuditLogInfo.jspx</to-view-id>
    </navigation-case>
    </navigation-rule>
    Here my problem is i want to get the result jspx page in new window.But im not able to do it.Please help me how can i do this?
    Thanks in advance!

    Thq very much.It is working fine.
    I added the command link in my home page.When i'm clicking on that link im able to get my child.jspx page in new window.But I have added the login page to my adf application.If i run the login page im able to get my home page.But now i'm not able to get my child.jspx page when i'm clicking on command link.How can i resolve this.Please give me your suggestions.
    Thnks in advance.

  • To open Adobe Interactive Form in New Window

    Hi Folks
    I want to open Adobe interactive form in new window not in popup. This form should contain data passed from parent view.
    Please help
    - Mandeep Virk

    Hi,
    Can you explain your requriement clearly.
    You have two views ParentView and PDFView. Two views embedded in Window1.
    By default ParentView will be displayed.
    Now you are navigating from ParentView to PDFView. Then ParentView will be replaced by PDFView in Window1.
    So here what is ur requriement. Why do you want an seperate Window here.
    If you want to open the PDFView in a popup. Just create another Window2. Ember PDFView in Window2. Now from ParentView opent Window2 as a model/external popup.
    Open View or Window in a external window (popup)
    Regards,
    Charan

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

  • In MountainLion System Preferences, "iCloud", "Mail, Contacts, and Calenders", and "Software Update" all want to open in 32 bit mode.  Security and Privacy won't open either.

    As stated in the header,
    iCloud
    Mail, Contacts, and Calenders
    Software Update
    all want to open in 32 bit mode.  Then when System Preferences quits and relaunches IN 32 bit mode, I get a dialog box saying "You can't open (pick one) preferences because it doesn't work on an Intel-based Mac."  Moreover, Security and Privacy does the same thing only without the song and dance about quitting and reopening.
    Whaaaaat???!!!  I've never owned anything BUT an Intel Mac.
    The "open in 32 bit mode" is not, and has never been checked in "Get Info"
    I tried going to ~Library/Preferences and tossing all com.apple.system preferences files and rebooting.  No joy.
    It actually looks like some joker has included a bunch of PPC preference panes in my copy of MountainLion, except some of them are new to this OS.
    My hardware is a mid 2010 13" MacBook Pro with4 gb of RAM, and a 500 gb hard drive, in three seperate partitions, running three Mac operating systems, one at a time.  I have SnowLeopard in a small partition because I still have a few things that don't run in Lion/ML.  Lion is still my main use machine in the largest partition, and when ML came out, I redistributed most of the unused space into a 3rd partition into which I did a clean install of ML in it's own partition so I could work through the growing pains without compromising my main computer.  I'm glad I did it that way, but I DO want to get ML working properly, and I can't do that if I can't authorize third party software.  Gatekeeper is currently in the way, and I can't get it to move.

    I dunno, that doesn't make any sense to me.
    I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes.  There are only 3 that run in 32 bit only.  They are all 3rd party, and none of the prefpanes are non Intel.  Like I said, I have never owned a PPC machine.  Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well.  The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
    As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box.  All using the same hardware. but one at a time.  I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to.  (Which I don't)  I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact.  How could ML system preferences be trying to launch prefpanes from a totally different machine?

  • I want to open my iCloud Photo Library but it keeps on saying "You must be logged in to iCloud to enable iClou Photo Library" i am logged in with my apple id so how else must I log in?

    I want to open my iCloud Photo Library but it keeps on telling me "You must be logged in to iCloud to enable iCloud Photo Library" I am logged in with my Apple ID What other log in should I do?

    No you should not continue to use iPhoto. You can't have an iPhoto Library on an NAS. The disk format is wrong and iPhoto is not designed for network access. End of story.
    Neither should you use iPhoto in Referenced mode with the Photos on a NAS as that's just storing up problems.
    For more on iPhoto and file management see this User Tip:
    https://discussions.apple.com/docs/DOC-6361
    That said, iPhoto is due to be replaced soon - in the coming months - by a new App, and this may not have that issue. For instance, there are no such reservations bout running referenced Aperture library - so who knows what may come with the new (that also replaces aperture.)
    So, you might want to hold on making any big decisions until you see the options. Why? Because what you're describing as a workflow is moving to an entirely different kind of workflow. You're going from non-destructive with iPhoto, to lossy and destructive in your suggested replacement. Is that what you want?
    What you export from iPhoto really depends on what you want: the original unedited image? Or a version of the edited one? What's for sure is the one thing you don't want is to export as Current - that's just a preview and missing loads of metadata.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

Maybe you are looking for