I want to perform an export in oracle8 on windows

i have a problem bringing up oracle8 on Windows XP
it is able to start to a certain point that is. it mounts but does not open
when it is trying to open i get the error ORA-00314
after database mounted. then error below follows
ORA-00314: Log 3 of thread 1, expected sequence# 384 doesn't match 381
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\ORA8\REDO01.log'
there is no back up any where.
how can i perform an export when database is not opened
please help me solve this problem

AFAIK, you cannot perform an export of a database that you cannot open. Pl post details of exact OS and database versions, along with the complete error messages from the alert log. Pl see if these MOS Docs can help
OERR: ORA 314 log of thread , expected sequence # does not (Doc ID 18373.1)
REDO or ARCHIVE Logfile Numbers Out Of Sync ORA-312 ORA-314 (Doc ID 1108550.1)
Pl also indicate what was done (previous to this error being encountered) that may have caused this error.
HTH
Srini

Similar Messages

Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

Adobe contact information - http://helpx.adobe.com/contact.html may help

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

If the bank account permits, I suggest getting a 1 TB SSD anyway. One cannot have too much storage.
Unless you are having issues with your current installation, a 'clean' install is not necessary. It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap. The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
Ciao.

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Perform an export for both ABAP & JAVA in one shot with WAS 640 SAPinst ...

Hello,
I have to perform an OS/DB Migration of a SAP XI 3.0 (WAS640-SR1), an ABAP + JAVA addin configuration.
I would like to know if SAPinst for WAS640 (and SR1) could perform an export for both ABAP & JAVA in one shot as it seems possible in NW7.0 SAPinst version. None of the WAS 640 OS/DB migration guides gives these possibility.
And if not not, could U confirm that I have to perform 1st an export (with R3LOAD) of ABAB stack, then an export (with JLOAD) of the JAVA one ?
And apply the same way for installation with R3load and JLOAD downloaded files ?
Thks in advance
Bernard Accoce
SAP Basis Consultant - TeamWork in Toulouse (France)

Hi Bernard,
No, both exports cannot be executed in one single step. You have to execute the procedure twice, once for ABAP and once for Java, like you already mentioned yourself..
For the import applies the same.
Kind regards,
Mark

Error in exporting from oracle8i (8.1.6)

hi,
i tried to make export in oracle8i (8.1.6) using the utility exp but it gives me this error after exporting only tables of the user:
EXP-00008:ORACLE ERROR 6553 ENCOUNTERED
ORA-06553:PLS-561:CHARACTER SET MISMATCH ON VALUE FOR PARAMETER 'SHORTNAME'
the dmp file generated does not contain any relations or procedures or db triggers,only tables.
knowing that i use AR8MSWIN1256 AS NLS_CHARACTERSET AND AS NLS_NCHAR_CHARACTERSET
and i already run the following sql files :
catalog.sql , catproc.sql ,catexp.sql
any one help me? thank you in advance.

This forum focuses on heterogeneous connectivity rather than
homogeneous connectivity.
Vira

I want to make a export to a pdf wich has to excluding blanc pages

Hallo
When you want to create a pdf without any blanc pages you can do this by using the printerinterface.
But now i want to do so this with the export to a pdf and i dont have this option
Sorry for my english

Hi Sukrit
            Thanks for your reaction
            The problem i have is the next one
            We are working with a web-2-print solution which is Indesign Server based
The version we use there is 5.5 at this moment and i will be version 6 soon
When the customer creates a new document the server will make a pdf using a distiller joboptions.
So any blank pages will be created also
I don’t have problems of deleting this using acrobat reader or professional
But the customer is afraid that his users will not do so
One of the solutions is that I let the system send the created document to my one email and make the correction and send
it then to the customer. But then they have to wait.
So I am searching for a solution in my document or in a distiller job
I hope you understand what I mean because my English is not so good as it shoot be
Kind regards
Piet Schmidt
Van: sukritd15
Verzonden: vrijdag 20 februari 2015 12:15
Aan: Piet Schmidt
Onderwerp: I want to make a export to a pdf wich has to excluding blanc pages
I want to make a export to a pdf wich has to excluding blanc pages
created by sukritd15 <https://forums.adobe.com/people/sukritd15> in Creating, Editing & Exporting PDFs - View the full discussion <https://forums.adobe.com/message/7213384#7213384>

We wanted to perform backup from command prompt but we want

OS: :Linux
DB version: 10.2
I am doing weekly hot backup.
I used rman for my backup.
No issue on backup.
I just ran the backup succesufully (on 070307).
But Enterprise Manager is not updated.
Its still showing last backup performed on 07 Nov 2006.
But from command prompt by using rman its showing current backup (on 070307).
I think EM shown backup status only
if user used EM to perform backup.
Is it correct?
If yes how to fix this issue, we wanted to perform backup from command prompt but we want backup status should be updated in the EM simultaneously.
D

Hi,
Within EM it is assumed that a control file backup will take place unless you specifically ask it to perform through a recovery catalog. I can't remember at the moment how to do this as I am at home but when you go into the admin/maintenance side of EM there will be an option to chose recvoery catalog. However saying that, EM should still report back even if a control file backup has been carried out.
also i think if you are using a comand prompt then EM will not know about it. You will have to define the job from EM for it to register.
rgds
alan

FINAL CUT STUDIO WANTS TO PERFORM AN UPGRADE?

Due to an array of problems with OSX (10.4.11), and syndication errors (306) - I've purchased a new hard drive and performed a fresh install using my Install Disk. I then proceeded to download and install all software updates. So far so good... No crashdump errors in the console log. Then... When I went to install Final Cut Studio 2 (the suspected culprit) - the Installer Menu wants to perform an Upgrade... The only problem... There isn't any software to Upgrade... This is a brand new hard drive with a totally clean OS. However... FCS2 is, in fact, installed and malfunctioning (Qmaster) on my other hard drive - leaving crashdump errors in the console log. Can anyone please explain why/how FCS2 would perform an upgrade, and not an Install?
This has been driving me crazy since I bought this computer in October 07
Please Help!

Apple's Installer looks in the /Library/Receipts folder to see if you have previous versions of an application installed. Normally, you would only see the "Upgrade" option if this were the case.
You might try temporarily disconnecting the other drive to see if Installer offers to do the job properly.
It is probably seeing the receipt for FCP there.

I want to cancel my Export PDF Adobe Reader and receive refund.

I want to cancel my Export PDF Adobe Reader subscription and receive the refund as it has been under 30 days. I do not see any telephone number that I can call to talk to anyone regarding this.
Ruth R.

http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

I want to upgrade adobe export PDF to adobe acrobat XI

I want to upgrade adobe export PDF to adobe acrobat XI

You can check on the Adobe site, but I do not think there is such an option. You can upgrade a previous version of Acrobat back to AA 9, but nothing else. Go to Products and select to buy Acrobat. Then change to upgrade and you will see only Acrobat is an option.

Physical to virtual ends with errors, other methods export but launch with windows repair 2008 r2

New to hyperV here, plan to implement it in a few months. So I am practicing with it now.
I am trying to convert a working 2008 r2 physical to virtual using Microsoft virtual machine converter. in the settings I was point it to my hyperv- server and I was getting errors, this was due to permissions. No matter what I did I can't get it to
work, not sure whats wrong. SO I installed hyper V under my win8.1 pro machine shared the folders and the export started.
Upon the end of the export where it goes into "Fixing disk' I get an instant error no matter how may times I do this or how which server I try to export I get an error here.
It still created files and when I then copy those over to my test hyper V the win2008 R2 export goes into repair mode, I'm sure it's a driver issue but I would have expected that MS would have stripped the drivers our before export.
I then tried Acronis backup server and was able to export to MS virtual machine but this export also goes into windows repair more.
In the past I've used acronis and restored a physical server , this would also go into repair mode unless I use the "intelligent restore" which strips the drivers.
I don't want to tinker with the live server to get this to work since It's still in production, but I would like to get this to work , would any one have a tip, what can I do to provide more information on the root of the problem?
nambi

Hi Sir,
>>I am trying to convert a working 2008 r2 physical to virtual using
Microsoft virtual machine converter.
Generally, I would suggest you to use
Disk2Vhd to convert a physical computer to Virtual Machine (virtual hard disk) then create a VM and attach that VHD .
Please refer to this
article .
Any further information please feel free to let us know .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Installation of oracle8i on windows 2003 64 bit

Hi,
We have oracle 8.1.7 on windows 2003 32 bit, now we want to migrate our system to 64 bit windows with oracle 10.2.0.4.
But when we we are trying to install oracle 8.1.7 on windows 2003 with 64 bit we receive below error.
ORA-12546 tns permission denied.
Kindly help us to resolve the same. as after installation of 8.1.7 we can be able to migrate the database to 10g.
It is not possible to use import export due to application dependency.
Kindly advice
Abhay.

ahk wrote:
Hi,
Thanks for the reply,
After doing import of the production schema on the 64bit server with 10g.
users are not able to log in into the application as password encryption description is not at all happening, as a result users are not able to log in to the application.What sort of password encryption? Did it have anything to do with the character set by any chance?
Is it ok if we apply 8.1.7.4 patch on production server, move that backup on 64 bit server & directly migrate it to 10g 64bit. (While doing the testing we have applied the 8.1.7.4 patch on the 8.1.7.0 database on 32 bit & application worked fine with no problem)As you have indicated that there were problems getting the 8i installation to work on a 64 bit server, I would again advise to upgrade to 10g on the same server and then migrate to 64 bit edition on 64 bit server.

OEM on Oracle8i for Windows NT

Aprhe l'installation d'une version d'ivaluation ORACLE8i pour Windows NT (Version Internet), je ne trouve pas Oracle Enterprise Manager dans le menu (Dimarrer> Programmes)avec tous les outils graphiques de gestion de la base. Comment fonctionne OEM avec cette version Oracle8i?

All I can say is that unless 8.1.7 comes out "RSN" then Oracle will be way behind its competitors in providing some basic J2EE functionality (not to mention support for the entire specification).
At least make a beta version available for those who WANT to use Oracle technology in products that aren't near production yet.
Will
null

HT4910 my iphone got damaged and i want my contacts from icloud backup onto my windows computer

my iphone got damaged and i want my contacts from icloud backup onto my windows pc ,please help

You can't access your iCloud backup from your PC. You'll have to export your contacts from icloud as a vCard, as explained here: http://support.apple.com/kb/PH3606, which can be imported to Google then exported as a CSV file that can be imported to your PC.

I want to perform an export in oracle8 on windows

Similar Messages

Maybe you are looking for