I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3??

I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3?? That seems to be just about all I can find out there, so far. Are those drives compatable with this macine? thx

SATA II

Similar Messages

What SATA hard drive(s) would one recommend for a G4 Sawtooth?

I plan to replace the main IDE/ATA/PATA hard drive on a 400 MHz G4 Sawtooth.
What SATA hard drive(s) would one recommend for this system? The recommendation can be regarding brands in general or a particular model.
Thank you.
-John

This feature ONLY comes into play on a Drive that has developed Bad Blocks that have not yet been corrected by re-writing the data.
What happens when you attempt to Read data from a Bad Block on a drive without that feature, the drive will Retry, and retry, and retry, in an attempt to get data that is good enough that the drive's error-correction logic can correct it. This can take so long that the RAID driver declares the drive as inaccessible, and splits the RAID into a functioning and a non-functioning unit, and declares the RAID compromised* ( that's not the word they use, but the correct term escapes me at the moment.)
Drives with Bad Blocks are more likely to develop more Bad Blocks and fail later.

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

Mid 2009 MacBook Pro 13 Hard Drive Upgrade Questions

I bought an upgraded hard drive for my mid-2009 MBP 13. I've done some reading and it appears that my model of MBP shouldn't have drive issues, but I still have a few questions that I'm hoping someone will answer. Perhaps this will all boil down to a little knowledge is a dangerous thing. That is, I may be worried without good reason. If so, I apologize ahead of time.
MacBook Pro 5,5
2.26 GHz
4GB RAM
10.6.3
Firmware version is: EFI64
The stock drive is a TOSHIBA MK1655GSXF (160 GB):
The new hard drive is the Western Digital Scorpio Blue 500 GB 5400 RPM drive.
I noticed that the temperature seemed to spike after installing the new drive. I didn't get the temperature of the hard drive before I took it out, but the CPU was consistently around 170 degrees Fahrenheit and the fan was in the 2,800-2,900 RPM range.
After putting the stock drive back in the MBP, the temps are consistently 142-145 degrees F for the CPU and 95-97 degrees F for the hard drive. The fan is right around 2,000 RPM.
I've read a bit about outrageous load cycles and just wanted to check the numbers.
The WD Scorpio Blue around 4,055 after 27 power on hours.
The stock drive was at last count, at 206701 after 2215 power on hours.
The machine is doing comparable things, downloading podcasts, Time Machine backups, browsing, etc.
The general questions, I have are:
Is the temperature supposed to spike like that when handling a larger drive?
If so, what is a reasonable range? I know I don't have the temperature of the new drive, but if I knew what to expect, I guess I would be more confident putting the new drive back in and not returning it.
What's a normal/healthy/reasonable (don't really know the term I'm grasping for) load cycle to see? I divided the load cycles by the number of power on hours and get around 150 for the WD and 93 for the Toshiba. Are either of those outrageously good or bad? I haven't been able to tell in my reading.
The bottom-line questions are:
Am I just overreacting based on what I've read? Or, is something not kosher and should I return the new drive and get something else? Should I try hdapm or something? If I should return the drive, any recommendations?
I've talked your collective ear off, I'm sure.
Thank you in advance for your responses.
Cheers,
Rob

For what it's worth I've put aftermarket 7200 rpm hard drives in 2006 and 2008 15" MBP's and also a WD Scorpio Black 320GB in a 2009 13" MBP 2.53GHz and have had no changes in cpu temp or fan speed. Your fan speeds and cpu temp with the new drive sound too high. Something else is going on here. The temp is not supposed to spike when handling a larger drive. Maybe it's something like
Spotlight indexing the new drive? Have a look at your Activity Monitor for an active process drawing resources with the new drive.

Problem with mid-2009 MacBook Pro 13" hard drives

In May of this year I upgraded my stock hard drive to a 500GB Hitachi from the stock 160. About 5 days ago the computer froze and hung gor several minutes. Mouse still moved but no response from the OS. Forced a restart after several minutes. The computer rebooted, but showed no hard drive. Install DVD (Snow Leopard) doesn't detect hard drive, neither does disk utility. I put the old hard drive back in, everything is fine. The OS finds updates available, updates to 10.6.4. Tonight, the same precise thing happens on the old drive. No disk showing in the installer or disk utility.
Any suggestions?

Run the Apple Hardware Test you'll find on one of the DVDs that came with your computer. Swap the drives again and repeat the test, so you'll have results from each drive. Note the exact text of the error message each time, then make a Genius Bar appointment at your nearest Apple Store, or take the machine to an authorized service provider for diagnosis, being sure to take along copies of the error messages.

My 13" black macbook keeps having hard drive failures -- I'm on my third hard drive

The first one lasted 2 years. It failed within the special warranty period that Apple offered because so many computers like mine were also having hard drive failures. I didn't know about the special warranty they were offering, even after contacting Apple and telling them about my problem and describing the exact symptoms of the problem they were fixing for free. Thank you for that. So I went to a local store and paid ~$130 to have it fixed. This time I was paranoid about not moving my computer, and if I did have to move it, make sure it was off. Then without warning, it happens again less than 2 years later. I would expect a computer hard drive, especially one that is taken care of as well as mine, to last more ~20 months (less than 2 years) TWICE. It seems that this is a problem not with the hard drive but with the computer. I'm pretty upset that hard drives are now basically disposable -- I'm afraid to use it now unless absolutely necessary, otherwise I'll feel like I'm making its clock tick closer and closer to the next time it fries the hard drive. For as much as I paid for this computer, I expect a bit more than that. Unless there is some magical fix to this, I can safely say my next computer will be a super cheap net book.
Does anyone have any more info on this, any ways to avoid frying more hard drives, or has any one had any luck resolving this issue with Apple? I greatly appreciate any help. Thank you!

Mechanical hard drives have moveable parts and they are going to fail eventually. Every drive has an MTBF (Mean Time Between Failure) rating in the thousands of hours, but that is an average (half will fail sooner, half will fail later) not an absolute longevity guarantee.
I've used an original (Apple-OEM Fujitsu 120Gb 5400rpm), a Hitachi 320Gb 7200rpm, and currently a Seagate 500Gb 7200rpm drive in my mid-2007 MacBook. I replaced the 120Gb because I was running out of room. I still use it as an external backup for certain files. The 320Gb Hitachi failed after less than two years, but had a three-year-warranty, so it was replaced at no charge. I'm using the Hitachi replacement externally to clone my current drive in order to test OS X and software updates before installing them 'for keeps' on my working system.
A solid-state (SSD) drive might be less prone to mechanical failure, but that is still no absolute guarantee that it won't EVER fail, and SSD's are still about double or more the cost of mechanical drives.
The best thing is to simply be prepared for the eventual failure with a strategy for frequent and reliable backups.

I am replacing my existing SATA hard drive to a Solid State hard drive and want to image the drive, is this possible?

I am replacing my existing 320 GB SATA hard drive that clicks and makes weird noises to a Solid State hard drive and want to image the drive, is this possible? I then want to replace the DVD with a secondary large drive for storage.
So I am looking for any "gotchas" that I may be unaware of.
Thanks!

Put the Old drive in an external notebook drive enclosure. Install the SSD in your computer. Boot from your Old drive's Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Clone Lion/Mountain Lion using Restore Option of Disk Utility
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the New SSD. Source means the external Old hard drive.
Set the new Startup Disk to the SSD and restart the computer.
This process clones both your old OS X volume and the Recovery HD volume to the SSD. You can use a similar process to clone the SSD to the new hard drive you will install.

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder.

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

I have a new hard drive on my imac I want to sync my ipad(which has the files I lost when my old hard drive died), which holds the files I lost when my old hard drive died. How can I sync my ipad with my new hard drive?

My hard drive on my IMac died, so I have a new hard drive. I want to sync my Ipad(which has the files I lost when my old hard drive died) back with my IMac. How can I sync my Ipad with my new IMac hard drive without erasing my legacy files on the Ipad at the same time?

Copy everything from your backup copy of your cpomputer to your new hard drive.

HT201250 I recently replaced my 2009 Macbook Pro's hard drive. I had the Apple store upgrade the OS to Mountain Lion while it was being repaired. I want to restore all of my old files and data, if I restore from Time Machine, will it revert to the old O

I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?

No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

HT1751 I want to copy the songs that are in my ipod in to an external hard drive and not from a itunes folder in my computer.

I want to copy the songs that are in my ipod in to an external hard drive and not from the itunes folder in my computer (the reason being is that the songs in itunes folder are not to my taste. Please help?)
I have the orignal ipod 120gb
Many thanks.
Afzal

Bare in mind that Sync is only oneway, from PC to your device. Unless you have the same music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

Pavilion 7 Bad Hard Drive, How to reinstall HP software on new Hard Drive?

Hi, I have a 2 1/2 year old p7 1247cb running Windows 8 Pro x64, just out of warranty, and the Hitachi internal hard drive is failing (eightforums.com helped me with diagnostic tools). I am replacing the HD and want to reinstall the whole system that was on the machine when I bought it. It came with Windows 7 and a promotion for free upgrade to Windows 8, which I did. I have my Windows 8 Key Code and have borrowed the installation files for Windows 8.
This is the first time I've done this sort of replacment, and I am wondering whether it's possible, or even desirable, to get all the manufacturer-installed drivers and software back on the new HD, or should I just let the Windows install search for all drivers for me?
Until the HD started failing, this was by far the most reliable desktop setup I've ever used, and I am wary about whether the new system, with cobbled-together drivers, will be as stable and reliable as what I had with the manufacturer-installed software and drivers,
Plus, as an aside, I want to vent for a moment that it seems crazy to me that a hard drive should start failing after just 2.5 years! This bundle was sold as a gaming system (it's never used for gaming, but the specs were what I wanted), and while it gets heavy use (mostly streaming video, wordprocessing, photo/video -editing and storage), I was surprised to encounter a hardware issue only 6 months past the warranty.
Any assistance is appreciated.

Hi,
Hard drives are mechanical and do fail. It's quite common in the industry and not just with HP.
Be sure that the new hard drive is not an advanced format hard drive and is not greater than 2TB.
Back up your data to external media if you can. If not then you will need to later use for backups.
Be sure to create the external HP recovery media (this should have already been done right after you received your PC).If you don't have the external recovery media then order it from HP. HP Recovery Disks. Performing a HP System Recovery with Windows 7
Replace the hard drive and then boot up the external HP recovery media and recovery your PC back to a factory day one condition.
Now you can reinstall Windows 8 using your "borrowed Windows 8 media".
There may be other ways of installing Windows 8 but I have given you the text book method. A generic key method, mentioned by me on this forum long ago and just recently revisted by another forum member may work.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Need help in installing a SATA hard drive with 865pe NEO2

Hello there
I need a help in installing a Sata hard drive ,it is WD 250 GB , my motherboard is 865PE Noe2 , the bios is the latest one
already I got another old hard drive ,not a Sata ,a regular IDE one installed as a master hard drive
I want to install the sata hd as a slave for the IDE hd for now to transfer the files and documents
I already physically installed the Sata hard drive yet the problem is that it was listed in the bios , I followed some of the steps here in the forum mentioned but all what I got is I found it listed as the fourth IDE master , not as the primary IDE slave
in Windows Xp Sp2 it is not listed of course in the windows explorer , but it is there in the device manager
look I am very confused and I tried most of the combinations in the ide configuration in BIOS
what should I do coz I am feeling so bad and stupid ,you can consider me a n00b in this hard drive thing

1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

I want to pgrade to an SSD drive in my Mid 2007 MacBook. What SATA hard drive can I install 2 or 3??

Similar Messages

Maybe you are looking for