I want to place a query in main menu

Hi Experts
I want to place a query in main menu but it is not in a crystal report format? How should I be able to do that in SAP 8.8?
Please guide me further in this matter.

Hi Bhavesh.....
If it is the case of only SQL Query then it is not possible to take it under standard module but you can definitely take it in User Menu.
But if it is the case of Crystal Report then you can anyway include it under standard module list.....
Regards,
Rahul

Similar Messages

Add query to Main menu in SAP 2007

Hi all!
Can i add query to main menu in SAP 2007. Now, i only add done query to My menu.
Thank you!

Hi Tien,
You cannot add the Query to the main menu.you can try the other way round. Paste the query in the crystal report and then check the report is comming OK. Then add it to the main menu via crystal Reports.
Regards,
Raj

Want to lengthen audio loop on main menu

On the main menu, my Drop Zones loop after about 30 seconds (the max for that template). That's fine. But the song also loops at the same time. It sounds not so good.
Is there anyway to lengthen the audio loop? I don't necessarily care if the video loop is altered.

Is that what is constraining my audio loop to 30 seconds?
In that case you'd be limited to the very tail end of the video so yes this could hold you down to 30 seconds or less in practice. The solution would be to move the start point /slider a bit forward to allow for a longer video loop. Hope this helps & good luck.

My iPhone synced with an old iPod, therefore changing my contacts, deleting photos,etc. I want to get back to the main menu on iTunes where I can set up my iphone properly.

Please HELP!

Network time outs are mostly cause by your security software settings. iTunes needs to contact Apple during the set up of the phone. iTunes for Windows: Troubleshooting security software issues
Your giftcards are part of the iTunes account and not affected by a new setup. Your contact info should also be on your computer.

How do you return to main menu at end of movie in iDVD 11?

I have created a movie in iMovie '11 with chapter markers, and imported it into iDVD 7.1.2 (1158) on an iMac
running OS X Lion 10.7.2
The movie imports all chapters with corresponding labels perfectly. I added a chapter at the very beginning of the movie in iMovie, and it shows up fine in iDVD.
I removed AutoPlay since I want the DVD to play the Main Menu upon inserting it into a DVD player. What I can't figure out is how to make the DVD return to the Main Menu once it finishes playing to the end of the movie. It will automatically go to the Chapters selection menu instead. Is it possible to have it return to the Main Menu?
In God's Harmony

It is very possible that your iDVD Project has no Chapter Markers.
It's possible. My "project" which included pictures as well as movies was all done in iPhoto as a slide show. From there I exported the slideshow into iDVD.
I sort of messed up "I think." I believe I did the original burn incorrectly-tester #1. I re-burned another one this afternoon which turned out very well-tester #2. Think I will stick with the options I used for tester #2 since it was the easiest.
For "chapters" I will need to do some extensive "how to" reading especially when it comes to iMove. I used iPhoto since it accepts both photos & movies. I "think" iMovie only deals with movies?
Thank you very much for your last post. It was very helpful.
Now onto the iPhoto fourms to learn how to "add" photos & movies to where I want them, not where the computer wants to put them.

In-Place Hold Query Based on Assigned Policy

Is it possible to create an "in-place hold" query that places a hold on all items matching an "assigned policy/personal tag?' If so, how do you do it? We have three possible assigned polices. If staff do not select a policy, their
email is purged in 90 days. If they do select a policy, it's an important message and we want to place it on an In-Place hold for the duration of the Assigned Policy.

I don't think so. The cmdlet used to create an in-place hold is New-MailboxSearch.
https://technet.microsoft.com/en-us/library/dd298064(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Where to place oracle query?

Hi,
I have followed evnafets suggestions when setting up tomcat for connection pooling. Everything works fine when I place the query in the jsp, but I would like to do this correctly and keep all sql code out of the view.
Where would I place the query, in a configuration file or would it go into a servlet ?
Thanks,
Alan
Message was edited by:
shadow_coder

Thank you for your time, it is greatly appreciated by
us new to java web-apps.
---warning --- beginning of rant ---
It almost seems hopless, i'm not sure how anyone can
possibly master or even learn all this,
it wasn't enough to learn basic java, then learn how
to use a servlet container (Tomcat 5.0), and then
figure how to make it connect it to oracle9i, and
seamlessly integrate this with the Apache2.0 web
server. (I won't go into the Apache2.2 ordeal i had!)
oh, then when you want to upgrade to Tomcat 5.5
scratch everything you know, things are now
different!
I thought all I had to do now was learn just enough
about jsp to use jstl with javascript for client side
validation, or learn jsf and just bypass the whole
javascript thing.
now, I find out I probably should use Hybernate, but
once I do this i'll find out Struts was the better
way to go, or Spring would have suited my situation
best.
-- end of rant ---
man, i needed to get that out, I feel much better :)
AlanAmen brother. I'm travelling the same road you are to Java App development. I feel your pain. I think you've got the right mindset, however: As I continue to learn, one thing I've been cognizant of is keeping things in a logical place, decoupled as much as possible from other "pieces". This rule of thumb allows me to say "Okay, I'll probably learn a better way to do this on Wednesday, so if I keep things segmented, it'll be easy to switch pieces in and out."
I doubt I'll ever get back to that "switch pieces in and out" phase, but it's good to know that it was organized as best as can be at the time of development. Keep the code comments in there, document as needed, test and test again. You'll be fine. :)
Nice rant, by the way. You speak for me, too. :)

Animation keeps running through. I want it to stop on main menu so i can click buttons

animation keeps running through. I want it to stop on main menu so i can click buttons which navigate to different scenes. Please help I am a noob.
here are screen shots of what i have going on:
Main time line "home" menu
script in frame 1
script in frame 48
scene 2 animation of shape tween which isnt supposed to run all the way through past the home page. I want it to animate but only after i click the button to do so.
script for this scene
scene 3 which is causing all the issues i think? supposed to be able to drag boxes. but it just runs through without stopping when i play it.
here is the compiler errors:

If you removed the stop() from scene 2 it will not stop there it will return to wherever "home" is.
If you intend to have the timeline stop at some frame, then you need to place a stop() command in that frame, or use a gotoAndStop() command.
If you are going to use scenes be consistent with the way you write the goto commands. The use of is rarely recommended - instead, use different sections of the timeline of just one scene, or use movieclips and control their visibility, or a combination of both.
If you continue to have issues, try simplifying first - build/add the navigation for one section at a time instead of trying to get it all in one shot.

I want to create a query to send auto email to customer while adding AR Invoice

Hi
Friends
I want to create a query to send auto email to customer while adding AR Invoice in SAP Business One 8.82.
using the following fields & Text like
email ID from - BP Master
' Dear Sir '
Invoice is generated on the name --- BPName
Quantity                                     --- 22.5 Tones
Invoice Value                              ---   85,000/-
date & Time                               --- 12-07-2014 : 16:18
Thanks & Regards
XXXXXXXXXX
Please tell me how to set this in SAP B1.
Srinivas

I want to to send email to customer automatically the current invoice details while adding AR Invoice in SAP Business One 8.82.
using the following fields & Text like
email ID from - BP Master
' Dear Sir '
Invoice is generated on the name --- BPName
Quantity                                     --- 22.5 Tones
Invoice Value                              ---   85,000/-
date & Time                               --- 12-07-2014 : 16:18
Thanks & Regards
XXXXXXXXXX
Please tell me how to write query in stored procedure to send email automatically.
Srinivas

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible?

I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible? In a nutshell I want to point the link to an image in a directory that uses just part of the address.

I know this is something you can do in Maya with linked files. I guess InDesign just isn't there yet.
MW Design - Yeah I think "Relative paths" is the right term! I want to create a Layout with an image in the center of the page - and then duplicate my folder structure with that file. With that, I want to replace the Linked image file with a diferent image file of the same name. In effect having multiple files of the same layout with different images. I hope that made sense.

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

CC error message - Can't install to root -wanting to place cc aps on internal SSD

CC error message - Can't install to root -wanting to place cc aps on internal SSD. (I know that LR5 has to go on the Mac OS disk...)
but what about the rest of the aps?

Johnmhannam have you adjusted the installation location within the Creative Cloud Desktop application? You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder.

I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder. renamed the photos starting with 1 and ending 262. thinking that would save the photos in order. Each time I try to export them that are placed in original folder names and descriptions need help.

This is a two part process. First we title the photos, then we export them, using the title as filename.
To title them
Once you have then in the order you want select them all and go
Photos -> Batch Change. Select set 'Title' to 'Text'
Choose a Title -> Graduation 2013 or whatever, then check the box at 'Append number to each photo.
Now, in the Album all your photos are named... Graduation 001, 002, 003 etc
Next Export them:
File -> Export, and in the Name option, choose 'Title as Filename' and complete the export.
Regards
TD

Query in Main Task Not Working But it works For BG Task

Hi All,
I have a requirement to send work item to different level approvers for that i have to find final level approver from a table and save the data accordingly ,
i have a main task and a Background task
<b> my problem is that the same query that works in back ground task is not working in the Main Task.</b>
SWC_GET_ELEMENT CONTAINER 'LEVEL' Level. is a macro written in the method in BOR in main task for getting value which is in the WF container and has binded to the task container. it is not picking up the value from the task container to the method.
Please help me on this
Thanks & Regards
Hari Sankar M

hi Arghadip Kat,
Thank You for Your Response, i've tried ur Suggestion but it is again not working
just let me explain again
i have two tasks,(these two tasks are in a loop.) with one BOR(object) and two Methods
One Method is for first Main task and another is for second task(which is a background task)
i need to get a value called final from a table, i've written a query in the method of Back ground task. and i'm getting the value correctly but i'm not able to pass this value to the main task coz the loop exits after executing the subtask and coz loops exit point is the value final.
So for getting the value of Final in main task i've written the same query in main task but its not working.
Thanks & regards
Hari

I want to keep songs on my main iTunes but remove them from the Cloud to make more room in the Cloud for new stuff. HOW?

I want to keep songs on my main iTunes but remove them from the Cloud to make more room in the Cloud for new stuff. HOW?

Are these purchased songs from iTunes? If so they do not count against your cloud storage.

I want to place a query in main menu

Similar Messages

Maybe you are looking for