I want to print 115 cards and have it shipped with express how long will it take to in total get to connecticut?
I want to print 115 cards and have it shipped with express how long will it take to in total get to connecticut?
No one but users just like yourself here - impossible to tell forus
Apple's delivery informatin is here - basically they say 3 to 5 business days for production plus shippin gtime based on your choice of shipping - my personal experiance has been that this is a conservative estimate but I am in CA
LN
Similar Messages
-
Will they have to keep it for more than a day or will I be able to take it home with me?
They won't replace the lens. If they determine it is a manufacturing defect, you'll get a replacement phone.
-
Just recieved my iphone4 and i have no service, how long will it take to activate?, Just recieved my iphone4 and i have no service, how long will it take to activate?
Normally activation should only be a matter of minutes, but if your iTunes library (where you're trying to activate the phone) is in a place where you have no cell service, it will not activate until you take it to a place where you do have service.
So if it is sitting idle and not activating that could be a reason (happened to me). If you're a Verizon customer you may have to dial *228, then press 1 to finish the activation. -
I 5c fell in toilet and won't turn off. have it in rice, how long will it take?
I 5c fell in toilet and won't turn off. have it in rice, how long will it take?
How long will what take? You should leave the phone in rice for at least 4-5 days. At that point, plug the phone in and let it charge for about 15 minutes and see if it turns on. Accept the fact your phone will probably never work properly again.
-
I have a damaged iPhoto software, I bought the apps, and it says its installing, how long will it take to install? How do I know if its installing
I use the Download Statusbar add-on for exactly the reasons you are mentioning. See the demo here
[http://youtu.be/BUDqWrJ-Vao Using Download Statusbar]
To install the addon, see
[[Find and install add-ons to add features to Firefox]] -
I just got a new iMac. was following the onscreen instructions to do migration assistance and I guess it connected to my old iMac via wi fi. It never instructed me to connect via firewire. Now it seems to have stopped. what can I do that won't completely mess it up? how Long will it take to do over wi fi?
Your new iMac does not have a Firewire port so you ned this adapter:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
to connect the two machines together and migrate simply follow the instructions in:
http://support.apple.com/kb/HT4413?viewlocale=en_US&locale=en_US#1 -
My ATV keeps telling me... "an error occured loading this content" I have tried playing this movie i downladed for 2 days how long will it take? Why after resetting the ATV is it still not working...?
Did you try unplugging the power cord for a few seconds, then plugging it back in? That usually fixes similar problems for me.
-
How long will it take to download and install this OS?
I want to update my Mac OS to the Lion OS; I just paid for it. how long would it take to download and start the istallation process through a wifi connection? I see the lion and the downloading bar however, it does not seen to be advancing. thanks,
Your time depends on how busy the Apple servers are and your ISP's download speed. For me it takes ~1 hour to download then ~ 30mins to install.
-
How long does it take to update Apple Tv. Its been more then two hours and its only in step 1 of 2?
Assuming your credit card info is accurate the entire transaction should just take a few seconds.
You don't need to download a new version of QuickTime Player 7 Pro. All you need is the email confirmation of your name and registration number. Enter that into your existing version of Player 7 and the pro features are "unlocked". -
entered id and password --now says loading--how long does this take????
wilsonfromtx wrote:
entered id and password --now says loading--how long does this take????
With regard to what? I assume that since the link connected to your question was from the "How to update your iDevice" kb article, you are talking about seeing this behavior after you updated the iPad.
So, if that's the case, it really shouldn't take but a minute or so, if it even takes that long. If this has been going on for minutes and minutes, the update process is stuck now. You can try restarting the iPad and see if the iPad behaves normally. That might be all that you need to do to set things right again. If restarting just takes you back to this page loading again, you can try rebooting the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Installing Nano and iTunes with dialup - how long should it take?
I got a nano for Christmas and am just now trying to use it. When I try to download iTunes it says that it will take upwards of 5 hours! I have dialup, living in a rural area, so I know it'll take longer, but can this be right? Also, when I download iTunes, what will happen to the music I have in Windows Media Player? Sorry, but I ma very new to iTunes & Nano!
It depends on a number of things?
1 - the amount of RAM installed.
2 - amount of free space on the boot drive. It's strongly recommended to have a minimum of 20-25 GB free space.
3 - the total playing time of the DVD.
4 - the encoding process selected. Professional Quality is a 2 pass process so will take more time than any of the other options.
5 - CPU speed of your Mac.
6 - if you're using a SL or DL disk.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums. -
I backed up my iPhone 4 last night on iCloud, and started the erase all content and settings a little over 4 hrs. ago. How long should I expect it to take to complete this process? Will it automatically do a restore on my phone? The reason I had to do this was because my iPhone 4 would not upgrade the latest IOS. Thanks for any information! Karnysue
Something has gone wrong. That should have happened almost instantly. Force the phone into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don't see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
I want to open a file and have it fill the desktop - how??
I have recently moved over from CS2 on PC to CS3 in MAC - I used to be able to open a file and it would open up in a full window filling the whole screen - now it opens up in a box with no surrounding space. When I maximize the minute I tap cmd + the widow reduces to minimize and just zooms into a part of the file. I am sure this is basic stuff but any help out there please??
gratefully
AngusThat's the difference between Macs and Windows. Windows opens applications in a... Window.
Try hitting the F key and see if that works for you. -
OK. How do I get rid of pin.wid as my default browser. When I click on firefox I get pin.wid. I can't uninstall it. I emailed them with this question. Reply (shortened); about:config in address bar, i promise, keyword.url in search box... stuck there.... no results.
There are a few different ways a site could take over your home page. Those include:
(1) Changing your setting<br>
(2) An add-on<br>
(3) Hijacking your Firefox shortcut
'''For #1''', you probably have already checked, but just in case:
* [[Startup, home page and download settings]]
* [[How to set the home page]]
You can use the Home button or open a new window (Ctrl+n) to test the change.
Note that malware can create a file that will revert your settings at startup. This article describes how to track down any such user.js file: [[How to fix preferences that won't save]].
'''For #2''', try this:
Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
'''For #3''', if you only get the unwanted page on startup and not when you use the Home icon or open a new window (Ctrl+n), check here: right-click your desktop shortcut for Firefox > Properties > Shortcut tab. For 64-bit Windows, the Target should be the following, no more, no less:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
Any luck? -
I have had several issues so far with my new aperture program, and this is the fifth time i have tired to collect all of my images (or nearly all) onto a single drive and be able to file them from my mac notebook...obviously one huge problem is that every timie the dog walks buy he knocks the cord out and i basiclaly have to start over again...
but i have taped the cords in an managed to fly across country while keeping the whole import running---up near 24 hours constant now...
anyway, i ahve a bunch of questions but my main one is, i think from reaeding up here that it could take a fulll week to finish this transfer (even though i beleieve i made it very clear that i only want to index the fiels from their current location and not to move any of them around at all....
the only rush really is that i have my daughter's graduation pictuers and everyone wants to see htem but i don't really want to cancel this transfer after i have already spent 24 hours!!!
sorry to write so much...
thanks for any ideas....
MaxMax,
It really can take very long to import and process so many images - I would not dare to make a prediction.
Can you open the Activity Viewer?
From Aperture's main menu bar: Window > Show Activity.
This window will tell you the filename of the image that is currently being processed.
if you are seeing, that the import is still far from being finished, you might to pause certain tasks directly from this panel, like the generation of previews or scanning for faces. I'd let the import run, if you see that it is making progress.
Have you enabled very time-consuming options, like the generation of high resolution previes or scanning for faces and places? if yes, and the import is not making any progress at all, I'd disable thes options in the Aperture preferences for the initial import. You can add these later for the projects where you want to use these features.
Regards
Léonie
Maybe you are looking for
-
In fCP x jpgs are blurry all of a sudden
no matter what size jpg or tiff when i move the sequence the photo turns blurry when i stop the movie the photo is sharp e.g a jpg 1043 x 694 276 k if i keep the image still it is sharp when i stop it in a sequnce of jpgs it is sharp if i move
-
Function module for convert date as sap internal format ?
Hi All, Is there any standard function module to convert the date filed as SAP internal date? My problem is while uploading data from excel sheet date filed can be any format for exp: dd/mm/yyyy or mm/dd/yyyy or yyyy/dd/mm or dd-mm-yyyy,mm-dd-yyyy
-
hello, I'm in trouble in iTunes update 10.3.1 on my ipad. I was wondering if someone could help me? ( I don't know talk in english very well. I am brasilian).
-
I purchased the second season of American Guns and the latest American Chopper and some episodes downloaded and some didn't and I go to purchase it again and it tells me already purchased but when I hit download it tells me to pay again then when I d
-
Run exe constructed in labview 6i without loaded nidaq drivers.
Exe is constructed using labview 6i. It would be convenient to install the exe and run time engine on the HDD, and execute as a demonstration program, without loading the nidaq drivers. No daq card in pc, nidaq would be on CD. Suggestions are appreci