I want to print front to back but the software always returns to back to front.
In Hp C4795 I want the print to be front to back , I hit the button for that to happen. I close out and use the printer. It prints back to front. No matter how many times I change it.
kathyws,
Are you changing it via control pabel, printer, perferences? And then click on Apply, then OK.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
Similar Messages
-
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer. -
My iphone hangs any time.I see a call coming but i cannot attend. My call drops anytime and i cant even end the call.The settings page doesnt respond many times.I have given the phone to Apple care , they update the software and return it back to me.IT WORKS FINE FOR 3-4 DAYS AGAIN THE SAME. Its under warranty and i am disappointed with the Apple product and service
If you used your backup to restore the data after it got returned, set it up as new device and don't use the backup data afterwards. It seems that some data inside the backup are corrupt. Follow this article and set up the account info and other setting manually after that:
Use iTunes to restore your iOS device to factory settings - Apple Support -
I am trying to raise a event in one of classes of userControl, and Fire it in the Main class. I tried two different ways to fire this event, one of them works, But I still want to know why other way cannot work, and how to fix it.
My userContol class:
public partial class UserControl1 : UserControl
public UserControl1()
InitializeComponent();
if (System.ComponentModel.DesignerProperties.GetIsInDesignMode(this))
return;
Class1 c = new Class1();
Thread accept = new Thread(
() =>
c.connection();
accept.Start();
And the Class1:
public class Class1
public delegate void myhandler(object sender, EventArgs e);
public event myhandler test;
public Class1()
public void connection()
test(this, new EventArgs());
In the Main, I just simply add into referent, and add
xmlns:my="clr-namespace:WpfControlLibrary1;assembly=WpfControlLibrary1"
then I try to subscribe this event in the main
public partial class SurfaceWindow1 : SurfaceWindow
/// <summary>
/// Default constructor.
/// </summary>
public SurfaceWindow1()
InitializeComponent();
Class1 c = new Class1();
c.test+=new Class1.myhandler(c_test);
// Add handlers for window availability events
AddWindowAvailabilityHandlers();
public void c_test(object sender, EventArgs e)
MessageBox.Show("fire");
If I only raise this event not into thread, it works fine, but If I try to let it raise in this thread, this test event only return null, and shows:
Object reference not set to an instance of an object.
looks like I did not subscribe it ever. So How to fix it if I must use it in thread.Subscribing to events window to class is not a great approach.
You have to then go un subscribe those handlers in order to allow your instance to be disposed.
Forget that and you'll eventually notice you have memory leaks.
The way I do this sort of thing is using mvvm light messenger.
You can keep everything decoupled then.
http://social.technet.microsoft.com/wiki/contents/articles/26070.aspx
I just did a bit of code for someone else which shows how to do cross thread stuff with this approach.
public partial class MainWindow : Window
public MainWindow()
InitializeComponent();
Messenger.Default.Register<String>(this, (action) => ReceiveString(action));
private void ReceiveString(string msg)
MessageBox.Show(msg);
Dispatcher.BeginInvoke((Action)delegate()
tb.Text = msg;
private void Button_Click(object sender, RoutedEventArgs e)
Task.Factory.StartNew(() => {
Messenger.Default.Send<String>("Hello World");
Note that the message arrives on the thread it was sent from. That's not the ui thread because it was sent from that task.factory.startnew to deliberately put it on a different thread.
In order to change UI controls, it uses dispatcher.begininvoke to run code on the UI thread.
Although this is in one piece of code behind publisher and subscriber can be in two totally different classes which have no reference of knowledge of each other.
Meaning you can send a message<t> from any class1 or whatever you like and your mainwindow can subscribe and act of receipt of a message<t>.
It is the type which defines which message one is. You put data you want to send in t and use it in the subscriber.
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
I have an older HP connected to the usb port of my Time Machine, and have it shared. I want to print from my iPhone on the network, but it can not be found in airport? How do I make this work?
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Read through this for information about Airprint printers and how to use them:
http://support.apple.com/kb/ht4356 -
Hello I am wanting to print from my ipad but my printer does not have wifi is this possible?
You can't cable connect a printer to the iPad.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Cheers, Tom -
I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?
This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track? -
I want to print with black ink only, the OFFICE DEPOT salesman told me that he turned off the color.
I want to print with black ink only, the OFFICE DEPOT salesman told me that he turned off the color. I don't want to buy colored ink, I don't use it.
HI,
Welcome to the HP Forum!
topdog3647 wrote:
I want to print with black ink only, the OFFICE DEPOT salesman told me that he turned off the color. I don't want to buy colored ink, I don't use it.
Please identify your notebook/pc /printer.
Look at the base/rear/side of the notebook/pc/printer at the barcoded sticker.
Post item number 2 as seen on the following example of an HP notebook's barcoded sticker. The barcode on your HP product may be slightly different in appearance, but will still have the important information needed for us to help you.
###Do not post the serial number of your product as it is personal information.###
If your printer is a laser printer then simply go to print preferences and select grayscale printing
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?
Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.
This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore -
I want to install os x lion but the app store doesn't offer a 'buy' option. Any ideas ?
I want to install os x lion but the app store doesn't offer a 'buy' option. Any ideas ?
Do you see a price next to Lion ($29.99 or local equivalent)? Click that to purchase and download it. You'll have to sign in if you're not already.
Also, your profile is wrong if you don't already have Lion (which IS 10.7).
Matt -
My iPhone 6 was stolen and i got it back, but the pass code was changed and so was the touch-id. and now im locked out of the phone because ios 8.1 requires either of the passwords to access the phone. and iTunes doesn't recognize it so i cant restore it at all PLEASE HELP
Take it to an Apple Store, take proof of purchase with you.
-
My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!
-
I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??
Try updating the printer driver.
Maybe you are looking for
-
I know I'm in the wrong place, but maybe someone will still help me...?
Hi all, I'm an ancient Solaris sysadm (like Solaris 6, long, long ago) who is trying out OpenSolaris on a T42 laptop. I registered under the OpenSolaris forum but alas, I can't login and the support people haven't fixed my problem, yet. Instead, they
-
I just received my iPad today. Everything is good but only that my safari wont work... When I opened the safari app, it will show up the web but only the bar on the top and the rest are white. Also, the touch screen seen no functioning when that happ
-
Having to render every single little change I make!
I know this has been asked before and discussed before and I've gone over every instruction that people have posted but I still have the problem of having to re render every single little change I make. If I shorten a clip I have to re render it if I
-
Http-xi-RFC synchronous call - multiple records ?
Hi Gurus, Can we have multiple records processing in RFC synchronous call ? for ex, BAPI_COMPANY_GET_DETAIL. I want to feed multiple company ids and get the responses in browser. I have changed cardinality in message mapping and interface mapping as
-
Best Network HD for my wireless network
I'm looking to buy a 250gig or larger network drive which I would like to connect to my d-link hub which is connected to my airport in my home wireless network. I have a G4 powerbook that I use most of the time and I have a firewire external drive fr