I want to print large enough so I can read with out using a magnafying glass because Firefox prints are so small how can I fix this

Every time I print whether it be coupons, or anything from the web the printing is so very tiny you can hardly read it. I use Firefox because I like it ... I don' t want to have to change back to internet explorer but I will if this can not be fixed.

By default, Firefox will "shrink to fit" when printing. You may need to choose Landscape mode for some sites. Depending on a site's design, you might be able to enlarge text instead of shrinking. I suggest using the controls in Print Preview to experiment with different options. Does that help at all?

Similar Messages

  • All games on facebook are so large I can not use them, the rest of firefox is in perfect size. how do i fix this

    I was using firefox and all was working well. It was Jan. 13,2012. Then for no reason while I was playing a game on facebook the screen went very large, then small and then stopped on very large,where very little fit on the screen. Every other page including all of facebook works fine. NOT the games. I tried uninstalling Mozilla and reinstalling, then it kept saying that it crashed and would not come back. I sent reports but heard nothing. Today i uninstalled again and now it works but not the games. And ideas?

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.

  • I have created a document in in design but when i print it out the borders are wrong. How do I fix this?

    I have created a document in in design and have put a border around a photo and text box, but when i print it out the border is not even. How do I fix this?
    Barry

    Hello John, Thanks for replying. I have attached the document as a PDF (is this OK). I have been tasked with designing this certificate for my local RSL sub-Branch for our up coming Centenary Of ANZAC commemorations. As most of what I do has been self taught I’m sure there is a simple answer to my problem. I have adobe CS6. This is how I set the document up. I first used the rectangle frame tool then pulled in a photo from Bridge and faded it.I then did the same with the logo. For the text I used the text frame then used the frame tool twice to form the border and adjusted the thickness. Then I set all of the margins and the document to A4  . When the document is printed it shows even borders of 12mm on the top bottom and right side but the left side is 34mm. I hope this makes some sense to you John.
    Kind regards Barry

  • I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

    I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Want to update Skype on my Iphone, keep getting message saying:must use Itunes to download because item is over 20MB. How do I do THIS?

    I simply want to update the Skype app on my Iphone, but keep getting a message that says: must use itunes to download because item is 20MB. Help. Mack

    Go to iTunes on your mac/pc and click on apps in your library.
    Click check for updates at the bottom.
    Selcet and start the skype update.
    After this sync your newer version of skype to your iPhone

  • HDR PRO in tool image has a large white block through it and buttons are unresponsive. How do I fix this?

    When I open images in HDR Pro I am met with a washed out image with a big white block through the middle about a third of the size of the image.
    This disappears when I export the image, which would be fine, but the buttons and sliders are not working in the app.
    This means The tool is useless. Any fixes?
    Cheers

    The symptoms you describe sound like there is an application-modal popup message box covering over the main HDR tool area but for some reason the message box is not fully rendered and you can only see the background, not the message it contains.
    This could be a transient condition that would be remedied by rebooting, or it could be a video-driver incompatibility that might be resolved by updating your video drivers from the manufacturer’s website, or perhaps changing the Graphics Processor Settings in the Performance tab of Photoshop Preferences.  You can uncheck Use Graphics Processor and restart Photoshop and see if things are different.  If so, then turn it back on, but adjust the level of acceleration in the Advance Settings from Advanced to Basic or in between and also turn on and off the other settings in Advanced Settings area to see which ones make a difference.
    If none of these grpahics system changes make any different, perhaps change the amount of memory that is being used in the PS / Prefs / Performance area, adjust it both more and less from what it is currently set to.

  • When printing from an online PDF, the page prints in extra large scale. How do I fix this?

    when printing from an online PDF, the page prints in extra large scale. How do I fix this?

    This can happen when Firefox has misread the paper size from the information supplied by Windows. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_printer_name.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.

  • I want to print form directly with out using spool request

    hi,
            i want to print form directly with out using output type screen (spool request or print preview ) , i want to supress the screen and get output directly to the printer. plz help me
    thanks&regards
    praveen

    Hi Praveen,
    In your program, where you are calling the OPEN_FORM function.. pass the name of the printer in the 'DEVICE' parameter of the function module..
    Also, there is a parameter OPTIONS of sturcture ITCPO in the same function module.. in this parameter you will find lot of options to set properties for the printing..
    There will be one field for immediate printing, set that field to 'X' and other settings for print in the same structure and pass to the function module..
    Thanks and Best Regards,
    Vikas Bittera.

  • For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

    For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

    With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
    In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer. 
    There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9.  It is the ratio of the pixel dimensions.  When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
    In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen. 

  • TS2551 forced to upgrade to get on IPhoto & now an ! shows up everytime I try to view/email/print a photo!  How do I fix this?

    I had to upgrade to get on IPhoto and now an ! shows up each time I click on a photo to email/print.  How do I fix this problem?  Thank you

    What do you mean by "get on iPhoto"?  What was the exact message that you got?  It may have been a message to upgrade the library rather than the application.  The only time the app needs to be upgraded is when the library has been opened by a later version of the application.
    As for the ! it shows up when iPhoto has lost/broken the file path to the original files in the library. So apply the two fixes below in order as needed: 
    NOTE: since you gave no indication of the version of iPhoto or system you're using the following is based on iPhoto 9 (11) and Lion or later.
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

    I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

    Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
    You need to install a third party program that will read the NTFS format.
    There is various software from PARAGON, Tuxera and NTFS-3G
    When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
    The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

  • When I ask to print from a webpage I get the winow to save as an .xps document then an error message. How do I fix it?

    No more details, just how do I fix this so I can print! It happens everytime I try to print a webpage, I usually have to copy the link and print from Explorer.

    You need to select the correct "printer" that you want to use in the Print -> Name dialog box. That XPS "printer" is the default in Firefox on Windows, until you select a different "printer". I am using quotes, because a "printer" can be a physical printer (hardware, that prints to paper) or a virtual printer (software, which is to a file - xps, pdf, etc).

  • Printer adds blue, how do I fix this? color profile? calibration?

    I have an HP 3210 printer and iphoto 06.
    When I make a copy of a picture with the printer in stand alone mode, the copy is almost an exact.
    When I scan the photo into iphoto and print it, the printer seems to add blue.
    How do I fix this?
    Can I create a custom solor profile or something to get it right?

    Patrick:
    First, you did check your ink cartridges to make sure you're not out in any of them? Duh. Make sure your monitor is calibrated. I use sRGB as the profile and adjust the brightness to make up for the aging monitor. Setting the gamma at 2.2 will help with just darkness.
    Do you have iPhoto's Advanced preferences set to Embed Color Profile? Not sure what would cause too much blue but in the Advanced printer settings under the Copies and Pages menu there are a couple of sections that you can use to adjust the print settings; Color Option and ColorSync. Create a new setting under the Presets menu and save those settings before each trial so that once you get what you want it will be easy to just select that preset and print.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I created text in photoshop and it is printing pixelated and not vector.  How do I fix this?

    I created text in a photoshop file and it is printing in pixels, not vecotor.  How do I fix this?

    Hello, and welcome to the forum.
    What file format did you use? Some types don't allow for vector content.
    For more info on vector versus raster (that is, pixels), you may want to read "Raster & Vector" at http://www.adobe.com/designcenter-archive/keyconcepts/articles/concept_raster.html

  • Illustrator document with positive photoshop (.tif, .psd) file prints negative. How do I fix this?

    I placed a positive grayscale photoshop file (.tif, .psd format) in an illustrator document that I painted in a spot color, when I print it, it outputs as inverse, negative. How do I fix this problem. It looks fine on the screen, but when I print it prints in negative. Is there some setting in photoshop or illustrator to fix this. Please advise
    Joe

    okay I figured out how I can get it to print correctly. I discovered the problem is when I paint the photoshop file in a spot color (pantone, gcmi), the file prints in negative or inverse of the image, but if i paint it in cmyk equivalent of the spot color i want then it prints fine.
    Thanks all for your help

Maybe you are looking for