I want to purchase a ring back tone but....

When I go to purchase a ring back tone only, it is bundling it with a ring tone for a price of 4.98. How do I just get a ring back tone???

cwmom,
Ringback are always fun and certainly enhance the experience on your wireless device! What phone do you have? Which ringback tone are you interested in purchasing? Povided below is a link to our website with step by step direction that will walk you through this process http://bit.ly/LSl3gA.
Thank you,
GeorgeP_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Ring back tone

I need some HELP. I want to change my ring back tone from Christmas music but can't get it to do. FRUSTRATED!!

Thanks for your contribution, Ann154!
Don't worry, susus214, we're here to help change your ring back tone. Ann154, is correct. This can be done in My Verizon at vzw.com Once you sign in using your mobile number's credentials you can go to I Want To...> More Actions> Media> Manage Ringback Tones. I'm sure you'll find this information helpful. Have a good evening.
DaisyP_VZWSupport
Follow us on Twitter @VZWSupport

Ring back tones

I just bought a ring back tone today but when I go to manage it, the web page is blank. What do I do to get my tone to my phone??

We would love to help out today angeleyes3110. Are you attempting to access the webpage via your mobile device? In order to manage/activate your new ringback tone you will need to access the site via home computer. Please keep us posted if you continue to have issues, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

How do i install ring back tone on my i phone 5s

can some one help me get ring back tones on my i phone 5s

IF these were iTunes ring tones and you could not get them back, there was a back in the iOS 8 upgrade. This is restored in iOS 8.1.2. If you have not upgraded yet to 8.1.2 you should do that.

No ringing back tone from PSTN (SIP trunk) via CUBE

Hello,
I have an issue about ringing back tone when I call from outside --> PSTN (SIP trunk) --> CUBE --> UCCX --> redirect call to extension. I hear IVR and can do DTMF. then press extension, no ringing back tone.
However when I call from PSTN (SIP trunk) --> CUBE --> DID (direct to IP Phone). I heard ringing back tone.
Call from inside to outside, I heard ringing back tone.
I connect cucm to cube by create H.323 gateway.
cucm 10.x
uccx 10.x
cube (cisco 2901) Version 15.2(4)M5
Please help
Thank you

Can you try changing theg Service Parameter"Send H225 User Info Msg" parameter and set it to "Use ANN for ringback" and see if it helps pls?
Also make sure you have Annunciators registered and available in the MRGL assigned to H.323 Gateway.
It is clusterwide parameter and hence applies to all node in the cluster.

Md110 cisco 3845 no ring back tone

md110--(pri)--router3845a------router3845b--(fxo)--another pbx
md110 user call pbx user can hear ring back tone ,and everything is ok.
but when pbx user call md110 can not hear ringback tone!
3845 ios is c3845-spservicesk9-mz.124-12b
3845a:
dial-peer voice 111 voip
description for Test
destination-pattern 108....
session target ipv4:172.16.1.251
dial-peer voice 100 pots
destination-pattern 900....
direct-inward-dial
port 0/1/0:15
3845b:
dial-peer voice 1 voip
description for Test
destination-pattern 900....
session target ipv4:172.16.2.25
dial-peer voice 100 pots
destination-pattern 900....
port 0/1/0
anyone can help me?

voice call send_alert
voice rtp send_recv
is added,
progress_id command is added too,
debug isdn q931 is ON.
*Nov 16 01:53:02.840: ISDN Se0/1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x00B2
Cause i = 0x8290 - Normal call clearing
*Nov 16 01:53:02.892: ISDN Se0/1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x80B2
Cause i = 0x8090 - Normal call clearing
*Nov 16 01:53:02.892: ISDN Se0/1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x00B2
*Nov 16 01:53:56.740: ISDN Se0/1/1:15 Q931: RX <- SETUP pd = 8 callref = 0x00DD
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18385
Preferred, Channel 5
Progress Ind i = 0x8083 - Origination address is non-ISDN
Calling Party Number i = 0x0181, '2331'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '1'
Plan:ISDN, Type:Unknown
User-User i = 0x00FE, 'U', 0x0100, 'Y', 0x0100, '1', 0x0100B10C060981, '2331'
*Nov 16 01:53:56.740: ISDN Se0/1/1:15 Q931: TX -> SETUP_ACK pd = 8 callref = 0x80DD
Channel ID i = 0xA98385
Exclusive, Channel 5
*Nov 16 01:53:56.888: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '0'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.056: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '8'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.224: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '2'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.400: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '9'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.564: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '0'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.732: ISDN Se0/1/1:15 Q931: RX <- INFORMATION pd = 8 callref = 0x00DD
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
*Nov 16 01:53:57.744: ISDN Se0/1/1:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x80DD
*Nov 16 01:54:00.156: ISDN Se0/1/1:15 Q931: TX -> ALERTING pd = 8 callref = 0x80DD
Progress Ind i = 0x8188 - In-band info or appropriate now available
*Nov 16 01:54:00.160: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to 2331 N/A
*Nov 16 01:54:00.160: ISDN Se0/1/1:15 Q931: TX -> CONNECT pd = 8 callref = 0x80DD
Progress Ind i = 0x8182 - Destination address is non-ISDN
*Nov 16 01:54:00.248: ISDN Se0/1/1:15 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x00DD
*Nov 16 01:54:05.988: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:4, changed state to up
*Nov 16 01:54:06.160: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to 2331 N/A
*Nov 16 01:54:12.120: ISDN Se0/1/1:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x00DD
Cause i = 0x8090 - Normal call clearing
User-User i = 0x00FEB1110180
*Nov 16 01:54:12.120: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to 2331 N/A
*Nov 16 01:54:12.120: ISDN Se0/1/1:15 Q931: TX -> RELEASE pd = 8 callref = 0x80DD
*Nov 16 01:54:12.156: ISDN Se0/1/1:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x00DD
*Nov 16 01:54:12.156: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to 2331 N/A
*Nov 16 01:54:12.156: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to 2331 N/A
*Nov 16 01:54:12.156: %ISDN-6-DISCONNECT: Interface Serial0/1/1:4 disconnected from 2331 , call lasted 11 seconds
*Nov 16 01:54:18.156: %ISDN-6-CONNECT: Interface Serial0/1/1:4 is now connected to N/A N/A

No Ring Back Tone after receiving 180/183(SDP) wo RTP

Hi,
I would like to ask how CUCM decides about which Ring Back Tone (Remote/Local/nothing) should be played?
There is a problem wisth 180/183 Message with SDP but without RTP. When CUCM receives that message, no Ring Back Tone is played. (CUCM 8.6 was used)
What's more:
1. When Ipphone receives 183(SDP) - remote device is sending RTP stream and later ipphone receives 180 (no SDP) -> Ipphone does not switch to play local RBT.
2. But when Ipphone receives 180(no SDP) and later Ipphone receives 183 (SDP) with RTP -> IPphone switches to play remote RBT.
Thanks for any help.
Marta

What is the PBX? Check if the PBX and version is on the Microsoft Interoperability Program (Supported or Qualified): http://technet.microsoft.com/en-us/office/dn788945 If listed,
there should be configuration notes or a deployment document.
If not listed, you might need to deploy a gateway between Lync and the PBX to resolve any interop issues.
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

UCCX ring back tone problem

Hi all,
Have a good day,
i just have a problem in ring back tone when i call UCCX CTI extension (which redirect call to MOH ) from mobile.
while there is ring back tone when i call MOH group from mobile
Thanks,

Problem solved..

18 sec silent between dialing digits and ring back tone

We have VoIP setup that connect branch offices through the head office PBX .(calls cross the E1 link twice that connect 3662 & PBX).
When call progress between two 1751 2V, there is a 18 second silent between dialing digits and getting ring back tone.
This seems not to be happened between 1750 2v.
Can anybody give me a suggestion to decrease this delay or add some tone to this silent period?
Thanks

debug for 1751 part 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind (vdbPtr=0x819546C8, callInfo={called=,called_oct3=0x81,calling=,calling_oct3=0x0,calling_oct3a=0x0,calling_xlated=false,subscriber_type_str=RegularLine,fdest=0,peer_tag=1, prog_ind=3,callingIE_present 0},callID=0x81918E30)
*Mar 1 00:04:20.935: cc_api_call_setup_ind calling number is null, answer addr dest pattern 6030 e164_ans_addr 0 e164_dest_pattern 1
*Mar 1 00:04:20.935: cc_api_call_setup_ind valid dest pattern, copying 6030 to calling number
*Mar 1 00:04:20.935: cc_api_call_setup_ind type 3 , prot 0
*Mar 1 00:04:20.935: cc_insert_call_entry: Increment call volume counter
*Mar 1 00:04:20.935: cc_insert_call_entry: current call volume: 1
*Mar 1 00:04:20.935: cc_insert_call_entry: entry's incoming TRUE. is_incoming is TRUE
*Mar 1 00:04:20.939: cc_incr_if_call_volume: not the VoIP or MMoIP
*Mar 1 00:04:20.939: cc_process_call_setup_ind (event=0x8193FBF4)
*Mar 1 00:04:20.939: >>>>CCAPI handed cid 2 with tag 1 to app "DEFAULT"
*Mar 1 00:04:20.939: sess_appl: ev(24=CC_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(2), disp(0)
*Mar 1 00:04:20.943: ssaCallSetupInd
*Mar 1 00:04:20.943: ccCallSetContext (callID=0x2, context=0x81853F50)
*Mar 1 00:04:20.943: ssaCallSetupInd cid(2), st(SSA_CS_MAPPING),oldst(0), ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
*Mar 1 00:04:20.943: ccCallSetupAck (callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: (transfer= 0, callID=0x2)
*Mar 1 00:04:20.943: cc_api_set_transfer_info: call transfer reset)
*Mar 1 00:04:20.943: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:20.943: ccCallReportDigits (callID=0x2, enable=0x1)
*Mar 1 00:04:20.943: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:20.943: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:20.943: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:20.947: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:20.947: ssaReportDigitsDone callid=2 Enable succeeded
*Mar 1 00:04:20.947: ccGenerateToneInfo (callID=0x2 tone=8)
*Mar 1 00:04:22.883: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:22.887: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:22.887: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.887: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:22.963: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:22.963: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:22.967: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:22.967: ssaDigit
*Mar 1 00:04:22.967: ssaDigit, 0. sct->digit , sct->digit len 0, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:22.967: ssaDigit,1. callinfo.called , digit 1, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:22.967: ssaDigit, 7. callinfo.calling 6030, sct->digit 1, result 1
*Mar 1 00:04:23.095: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.095: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.095: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.095: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.175: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=1,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.175: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.175: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.175: ssaDigit
*Mar 1 00:04:23.175: ssaDigit, 0. sct->digit 1, sct->digit len 1, usrDigit 1, digit_tone_mode=0
*Mar 1 00:04:23.175: ssaDigit,1. callinfo.called , digit 11, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.175: ssaDigit, 7. callinfo.calling 6030, sct->digit 11, result 1
*Mar 1 00:04:23.443: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.447: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.447: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.447: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.523: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=7,duration=115,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.523: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.527: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.527: ssaDigit
*Mar 1 00:04:23.527: ssaDigit, 0. sct->digit 11, sct->digit len 2, usrDigit 7, digit_tone_mode=0
*Mar 1 00:04:23.527: ssaDigit,1. callinfo.called , digit 117, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.527: ssaDigit, 7. callinfo.calling 6030, sct->digit 117, result 1
*Mar 1 00:04:23.855: cc_api_call_digit_begin (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9, digit_begin_flags=0x1, rtp_timestamp=0xEE81E9A3
rtp_expiration=0x0, dest_mask=0x1)
*Mar 1 00:04:23.855: sess_appl: ev(10=CC_EV_CALL_DIGIT_BEGIN), cid(2), disp(0)
*Mar 1 00:04:23.855: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_DIGIT_BEGIN)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.855: ssaIgnore cid(2), st(SSA_CS_MAPPING),oldst(0), ev(10)
*Mar 1 00:04:23.955: cc_api_call_digit_end (dstVdbPtr=0x0, dstCallId=0xFFFFFFFF, srcCallId=0x2,
digit=9,duration=135,xruleCallingTag=0,xruleCalledTag=0, dest_mask=0x1), digit_tone_mode=0
*Mar 1 00:04:23.955: sess_appl: ev(9=CC_EV_CALL_DIGIT_END), cid(2), disp(0)
*Mar 1 00:04:23.955: cid(2)st(SSA_CS_MAPPING)ev(SSA_EV_CALL_DIGIT)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.955: ssaDigit
*Mar 1 00:04:23.955: ssaDigit, 0. sct->digit 117, sct->digit len 3, usrDigit 9, digit_tone_mode=0
*Mar 1 00:04:23.959: ssaDigit,1. callinfo.called , digit 1179, callinfo.calling 6030, xrulecallingtag 0, xrulecalledtag 0
*Mar 1 00:04:23.959: ssaDigit, 7. callinfo.calling 6030, sct->digit 1179, result 0
*Mar 1 00:04:23.959: ccCallReportDigits (callID=0x2, enable=0x0)
*Mar 1 00:04:23.959: cc_api_call_report_digits_done (vdbPtr=0x819546C8, callID=0x2, disp=0)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2) peer list: tag(3) called number (1179)
*Mar 1 00:04:23.959: ssaSetupPeer cid(2), destPat(1179), matched(1), prefix(), peer(8191BA0C), peer->encapType (2)
*Mar 1 00:04:23.959: ccCallProceeding (callID=0x2, prog_ind=0x0)
*Mar 1 00:04:23.959: ccCallSetupRequest (Inbound call = 0x2, outbound peer =3, dest=, params=0x8194FDE0 mode=0, *callID=0x81950210, prog_ind = 3) callingIE_present 0
*Mar 1 00:04:23.959: ccCallSetupRequest numbering_type 0x81
*Mar 1 00:04:23.963: ccCallSetupRequest encapType 2 clid_restrict_disable 1 null_orig_clg 1 clid_transparent 0 callingNumber 6030
*Mar 1 00:04:23.963: dest pattern 1..., called 1179, digit_strip 0
*Mar 1 00:04:23.963: callingNumber=6030, calledNumber=1179, redirectNumber= display_info= calling_oct3a=0
*Mar 1 00:04:23.963: accountNumber=, finalDestFlag=0,
guid=2354.2999.14ef.11cc.8008.bb84.44aa.06a5
*Mar 1 00:04:23.963: peer_tag=3
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179,called_oct3=0x81, calling=6030,calling_oct3=0x0, calling_xlated=false, subscriber_type_str=RegularLine, fdest=0, voice_peer_tag=3},mode=0x0) vdbPtr type = 1
*Mar 1 00:04:23.963: ccIFCallSetupRequestPrivate: (vdbPtr=0x818A8AE0, dest=, callParams={called=1179, called_oct3 0x81, calling=6030,calling_oct3 0x0, calling_xlated=false, fdest=0, voice_peer_tag=3}, mode=0x0, xltrc=-5)
*Mar 1 00:04:23.963: cc_insert_call_entry: not incoming entry
*Mar 1 00:04:23.963: cc_insert_call_entry: entry's incoming FALSE. is_incoming is FALSE
*Mar 1 00:04:23.967: ccSaveDialpeerTag (callID=0x2, dialpeer_tag=0x3)
*Mar 1 00:04:23.967: ccCallSetContext (callID=0x3, context=0x81854A68)
*Mar 1 00:04:23.967: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(2), disp(0)
*Mar 1 00:04:23.967: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_REPORT_DIGITS_DONE)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(0)
*Mar 1 00:04:23.967: -cid2(3)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
*Mar 1 00:04:23.967: ssaReportDigitsDone cid(2) peer list: (empty)
*Mar 1 00:04:23.967: ssaReportDigitsDone callid=2 Reporting disabled.
*Mar 1 00:04:23.967: cc_api_supported_data data_mode=0x10002
*Mar 1 00:04:23.971: cc_incr_if_call_volume: remote IP is 192.168.10.210
*Mar 1 00:04:23.971: cc_incr_if_call_volume: hwidb is FastEthernet0/0
*Mar 1 00:04:23.971: cc_incr_if_call_volume: create entry in list: 1
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[1] of callID[3]
*Mar 1 00:04:25.975: ccTDPvtProfileTableObjectAccessManager: No profileTable set for callID[3]
*Mar 1 00:04:25.975: ccTDUtilGetInstanceCount: For tagID[2] of callID[3]

N78 unable to listen the ring back tone

Every body
here in indonesia we've got a problem with nokia N78. we can't listen to the ring back tone if it started with dual mode.....and if we set the network in GSM network then it will be normally....why this could be happen ???? the software version is 10.136 ???

Ol Ringback Tones use to use them Many Moons ago! b

HT5035 i have a credit of 15.08 and want to purchase song for 14.97 but says insufficient funds??? how is that possible??

i have a credit of 15.08 and want to purchase songs totaling 14.97 but keeps says insufficient funds... how is that??

If you are in the US then you need to add on your state's sales tax - does that take it over $15.08 ?

PSTN Caller no ring back tone when IPPhone is CallForwarded

CallManager version 4.1(3)SR with 6608 T1 blade. IPPhone is call forwarded to an external PSTN number. PSTN caller dials IPPHone DID number, Phone is forwarded to external number via 6608 T1 PRI, PSTN user hears no ring back. User most of the time hangs up. Any help would be great.

Hi John,
You could try changing this setting on the Callmanager Gateway config page (after hours);
Setup non-ISDN Progress Indicator IE Enable
Default leaves this setting disabled (unchecked).
Enable this setting only if users are not receiving ringback tones on outbound calls.
When this setting is enabled, the Cisco CallManager sends Q.931 Setup messages out digital (that is, non-H.323) gateways with the Progress Indicator field set to non-ISDN.
This message notifies the destination device that the Cisco CallManager gateway is non-ISDN and that the destination device should play in-band ringback.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed699.html#wp1311922
Hope this helps!
Rob
Please remember to rate helpful posts...........

I want to purchase some music from itunes but I'm being told when I do all my old music will be removed once I add the new music

I want to purchase more music for my ipod nano from itunes and I'm being told that if I do the cds I have put on my ipod will be deleted and all of my older music will be gone. Is this correct?

To import your photos to iPhoto, open the app on oyur computer, then connect your iPad. wait for it to show up on the left toolbar and you can select all and import them to your iPhoto library. Drag and drop it to your desktop or wheverever you want them. Is it just photos you wanted to import?

TS2972 having trouble with ring tone and or ring back tones...i followed all directions and cant access ring tone from my play list.

having trouble with ringtone and ringback tones ..i followed all directions for home sharing. does anyone have a real solution???

Hello sairdoor123
From what I understand the issue seems to be with the hardware, obviously since the phone was dropped that could cause undesired results.
If all your data is backed up to a computer then I would recommend doing a hard reset: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
If a hard reset is done then I would caution you with the following choices: ( Should I have the audio circuit repaired as suggested by one of the repair guys? Or would that be risky?) - I would say this is risky because the person repairing the devise could easily sodder the wrong part of the hardware.
If you really do think repairing the circuit board is more cost effective then I would recommend researching all your possible repair shops before doing any work. Make sure they have the credentials and experiences.
Hopefully things work out for you.
Post relates to: Centro (Sprint)
Post relates to: Centro (Sprint)

How to change the ring back tone?????

I can't figure out how to change the ringback tone........classical is not my genre.

Ol Ringback Tones use to use them Many Moons ago! b

I want to purchase a ring back tone but....

Similar Messages

Maybe you are looking for