I want to put my MaxiYatzy game out on the Internet!
I have made a maxiyatzy game and I want to publish on the Internet. It is a multiplayer game so I want to put it on a server so people can connect to the game and play against each other.
Can anyone give me some clues on how to do this in a relative easy way.
-superolaf-
Actually, XP is older than Snow Leopard and will install on a Mac via Boot Camp.
So are numerous flavors of Linux.
While Kurt's statement is true for Mac OS, Boot Camp, and several virtualization engines offer more options*:
http://www.macmaps.com/macosxnative.html#WINTEL
And as I say, you can run older applications, as long as they support Rosetta, and don't do anything that Snow Leopard doesn't like in terms of drivers. That's why I posted my FAQ*:
http://www.macmaps.com/upgradefaq.html
As you may find some of your older applications have been tested with Snow Leopard, and will still work.
- * Links to my pages may give me compensation.
Similar Messages
-
I just upgraded my 3GS to IOS5, and now at work when i am connected to our WiFi I can no longer get out to the internet.
A little back story on how it worked prior to ios5:
I would connect via wireless, and then load Safari and type in a webpage I wanted to go to. A pop up box would come up, to authenticate me on our Web filter server (Running Smartfilter), I woudl enter my regular Active Directory username and Password and boom, i could then surf to my hearts content.
After the upgrade, I connect to the wireless, load Safari, type in the webpage i want to go to, and the progress bar moves abotu 3mm and then stops, I never get the smart filter prompt.
I have tried a full reset on the phone, forget network, reset all network settings, I even tried putting in the IP address of the smart filter box as a proxy and still it doesnt work. I have gone to smartfilters website to see if anyone else has posted there, or if there was a clue as to why it doesnt work, but nothing so far.
anyone else having this problem? any ideas?
If it wasnt broken, why would apple mess with it! a LOT of companies run smartfilter as well as other web filters. I thought apple was trying to seduce corporate customers, and so far a lot of poeple are dissapointed that they cant get to the internet.
tha
nks in advance for any assistance.
jI am having the same problem. The issue also occurs with Safari on Mac OS 10.7. I work for a school and I am sure that other schools are using smartfilter too.
-
Everytime I close out of the internet and go back in, I have to reinstall firefox, why?
I use to have firefox on my computer and then all of a sudden it was gone. This happened about a month ago. I reinstalled 3.6 version for my online classes and everytime I close out of the internet I loose firefox. I have to go to my downloads and reinstall it. Is there a way to fix this?
If you want to change the layout to be more like Firefox 3.6, you can do so. Firefox 9.0.1 is the current version and Firefox 10 will replace it at the end of January 2012. The only other version of Firefox that is currently supported and updated is Firefox 3.6.25, '''<u>but support for the Firefox 3.6 version is likely to end soon</u>'''.
To change newer Firefox versions to look more like Firefox 3.6.x:
*See --> https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36
*See --> http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
*See --> http://blog.fligtar.com/2011/01/16/how-to-customize-firefox-4s-ui/
*See --> '''''Firefox 3 Theme for Firefox 4+''''': https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
**Add color home, back/forward and other buttons (like Firefox 3) to the Navigation Toolbar in place of the gray buttons in Firefox 4+
**See: http://ffaddons.game-point.net/ff3ff4/
*Also see: http://support.mozilla.org/en-US/kb/How+to+customize+the+toolbar
Firefox 3.6.25 (supported/updated only for a short time):
*Download --> https://www.mozilla.org/en-US/firefox/all-older.html
*See --> http://kb.mozillazine.org/Go_back_to_an_old_version_of_Firefox
*For a smoother downgrade transition --> http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
*You also might want to see:
**http://support.mozilla.org/en-US/kb/Backing+up+your+information
**http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
thanksI found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?
-
I have taken all recommended measures to clear my iPad Air but, I still get kicked out of the internet. Problem seems to be more frequent as time passes
I don't know what you mean by "all recommended measures."
Please tell me that it has NEVER been jailbroke. If that's the case, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Connecting out to the Internet using Sockets
Hi,
My project is an Internet Connection Sharing project where a no of clients try to access the Internet through a single connection (d main server). I've got a basic Java Browser that simply sends on the URL address ("www.java.sun.com") typed into a textfield by the user to a Server when a button is clicked. This is done thru basic read & write methods using an ObjectInput & ObjectOutputStreams. I've also created a socket connection out to the Internet by passing in the URL on port 80, thus establishing a connection... here's the code:
inet_SockCon = new Socket( InetAddress.getByName( str_Buffer ), 80 );
System.out.println( "Connected to: " +
inet_SockCon.getInetAddress().getHostName() );
The next step is trying to get the URL page requested back to the server and from there to the client browser where it will be displayed. I'm using a JEditorPane() on my Browser which formats the HTML data. If anyone has any ideas as to how i can do this it would be gratefully appreciated.
Thank you.Use a HttpURLConnection.
-
I get on the internet with my Ipad2 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?
Yes if you purchase the tethering data plan for your iPhone. See:
iPhone: System requirements for Personal Hotspot -
Does anyone know what protectio Apple has for this virus that is supposed to shut us out of the internet on Monday?
There was a security patch made available a few months ago. So, if you're up to date, you're fine. Here's a link to check whether or not you have any problems with that:
http://www.dns-ok.us
If the site is green, you're OK.
The actual virus attack happened a year ago,but the FBI hasput up servers to keep people on the internet, until now.
http://www.nbcphiladelphia.com/news/tech/DNS-Changer-Virus-Could-Keep-Thousands- Off-Internet-161442515.html -
SCEP going out to the internet after being migrated to SCCM 2012 and saturating facility MPLS.
I was unaware of the fact that SCEP was gonig out to the internet to pull down 120 megs worth of data each time a client is migrated. I'm trying to determine the easiest or best way to avoid this. I've done some research and it looks like bundeling the SCEP
policy with the migration package might work. I also saw some tool that you can use to add a SCEP update rollup to the package. Ultimately if i could just get the exact URL the clients are going out to our networking team could apply QoS to this URL. Unfortunately
though it appears in the MPCMDRUN.log to go to go.microsoft.com/fwlink, but on the networking side in pathview i seen the client ends up going to Akamai.
I'm assuming MS offloads their web traffic to Akamai and that first link is redirected, if that is even the right link. Does anyone know a way i can prevent this while still getting the client up to date. This entire time I thought the clients would pull
what they needed from the SCCM 2012 env. I'm using ADR to push the definitions and that seems to be working fine except for 2 situations. One a client is migrated, or 2 the client comes online after being offline for more than 7 days and goes out.
Either way if someone could provide me with the URL for throttling or a better method for deploying I would be very grateful. So far we've migrated about 8 thousand clients and have about another 10 thousand to go. The majority of the clients have local
pull DPs, and if further details of my infrastructure would be helpful please just let me know.
Thanks,
-KRJorgen,
I appreciate you pointing out the setting and that has helped partially and I was able to track down the URL that is being used by the clients for QoS by networking. Now management has pushed back with why are the clients going to the internet at all. I
can understand why. If were deploying all the patches why can't the clients pull their SCEP engine from the SUP/WSUS server. I see it finding it in the MPCMDRUN.Log file but it still goes out to Microsoft to pull the 120 meg file. Do i not have any other options
for pushing the engine to the clients, if ADR is working for current clients what am i missing. I'm sure its something obvious, but my migration is on hold up until I can keep the clients from going to the internet for their new engine and deltas.
Any help you could provide i would very much appreciate. Thanks again Jorgen.
-Sam Kachar -
Dmvpn + local break out to the internet
Hi,
I have a dmvpn network, with multiple spokes.
One of them, needs to have a local break out to the internet.
Wasn't able to find a configuration example, so maybe if someone could show how to config it.
Basically what I need is a split tunnel configuration, to redirect the internet traffic outside of the vpn-tunnel.
here's the config of my router,
hostname testrouter
boot-start-marker
boot-end-marker
aaa new-model
aaa group server radius testradius
server name PRO007
no ip domain lookup
ip domain name test-domain
ip inspect WAAS flush-timeout 10
ip cef
no ipv6 cef
track 1 list threshold percentage
object 101
object 102
delay down 180 up 5
track 101 ip sla 1 reachability
track 102 ip sla 2 reachability
crypto isakmp policy 10
encr aes 256
group 5
crypto isakmp profile ISAKMP-DMVPN-CA
self-identity fqdn
ca trust-point sec-ca
match identity host domain alert.local
keepalive 60 retry 10
crypto ipsec transform-set ESP-AES256-SHA-TRANSP esp-aes 256 esp-sha-hmac
mode transport
crypto ipsec profile ESP-AES256-SHA-CA
set transform-set ESP-AES256-SHA-TRANSP
set isakmp-profile ISAKMP-DMVPN-CA
interface Loopback0
ip address 10.168.244.134 255.255.255.255
interface Tunnel0
bandwidth 5000
ip address 10.168.246.134 255.255.254.0
no ip redirects
no ip proxy-arp
ip mtu 1400
ip nhrp authentication DMVPN_05
ip nhrp map 10.168.246.1 xxx.xxx.xxx.xxx
ip nhrp map 10.168.246.2 xxx.xxx.xxx.xxy
ip nhrp map multicast xxx.xxx.xxx.xxx
ip nhrp map multicast xxx.xxx.xxx.xxy
ip nhrp network-id 121
ip nhrp holdtime 600
ip nhrp nhs 10.168.246.1
ip nhrp nhs 10.168.246.2
ip nhrp registration no-unique
tunnel source FastEthernet4
tunnel mode gre multipoint
tunnel key 121
tunnel path-mtu-discovery
tunnel protection ipsec profile ESP-AES256-SHA-CA shared
interface FastEthernet0
no ip address
spanning-tree portfast
interface FastEthernet1
no ip address
spanning-tree portfast
interface FastEthernet2
no ip address
spanning-tree portfast
interface FastEthernet3
no ip address
spanning-tree portfast
interface FastEthernet4
ip address dhcp client-id FastEthernet4
ip access-group INET-INBOUND in
no ip proxy-arp
duplex auto
speed auto
interface Vlan1
ip address 10.169.6.177 255.255.255.248
no ip proxy-arp
router eigrp 1
distribute-list EIGRP-PERMIT-OUT out Tunnel0
network 10.0.0.0
passive-interface default
no passive-interface Tunnel0
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route xxx.xxx.xxx.xxy 255.255.255.255 FastEthernet4 dhcp
ip route xxx.xxx.xxx.xxx 255.255.255.255 FastEthernet4 dhcp
ip route xxx.xxx.xxx.xxw 255.255.255.255 FastEthernet4 dhcp
ip access-list standard EIGRP-PERMIT-OUT
permit 10.169.0.0 0.0.31.255
permit 10.168.244.0 0.0.1.255
ip access-list extended INET-INBOUND
permit udp any any eq bootpc
permit esp host xxx.xxx.xxx.xxy4 any
permit gre host xxx.xxx.xxx.xxy4 any
permit udp host xxx.xxx.xxx.xxy4 eq 2000 any
permit udp host xxx.xxx.xxx.xxy4 any eq isakmp
permit udp host xxx.xxx.xxx.xxy4 any eq non500-isakmp
permit esp host xxx.xxx.xxx.xxy5 any
permit gre host xxx.xxx.xxx.xxy5 any
permit udp host xxx.xxx.xxx.xxy5 eq 2000 any
permit udp host xxx.xxx.xxx.xxy5 any eq isakmp
permit udp host xxx.xxx.xxx.xxy5 any eq non500-isakmp
permit tcp host 193.164.88.196 eq www any
permit udp host 193.164.88.196 eq 123 any
permit icmp any any unreachable
permit icmp any any echo-reply
permit icmp any any time-exceeded
deny ip 10.0.0.0 0.0.0.255 any
deny ip 172.16.0.0 0.0.16.255 any
deny ip 192.168.0.0 0.0.255.255 any
deny ip 127.0.0.0 0.255.255.255 any
deny ip host 255.255.255.255 any
deny ip any any
ip radius source-interface Tunnel0
ip sla 1
udp-echo 10.168.246.1 2000 control disable
threshold 3000
timeout 3500
frequency 4
ip sla schedule 1 life forever start-time now
ip sla 2
udp-echo 10.168.246.1 2000 control disable
threshold 3000
timeout 3500
frequency 4
ip sla schedule 2 life forever start-time now
snmp-server community rvssnmp RO
snmp-server location BX
snmp-server contact Securitas RVS team
radius server SECEUAD001
address ipv4 193.164.88.2 auth-port 1645 acct-port 1646
key 0 V8gUp9avUruprec
line con 0
exec-timeout 60 0
privilege level 15
line aux 0
line vty 0 4
exec-timeout 60 0
transport input telnet ssh
transport output telnet ssh
ntp server 10.168.246.1
ntp server 10.168.246.2
ntp server 193.164.88.196
ntp update-calendar
endThat's how it would work by default.
Only tunnel IPs and those defined by EIGRP will go through the Tunnel interface.
Please provide output of show ip route to see your gateway of last resort.. -
I am not receiving mail from either of my accounts. It keeps telling me the port is timing out. The internet is working however.
Was the iPod previous synced to another iTunes library/computer?
Was it setup via wifi?
Setup via iTunes when connected to this coputer/iTunes library?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Lat, restore from backup. See:
iOS: How to back up -
Short story; Company A acquires Company B. B is still using their external mail system for a period of time before transititioning to A's email. After B moves to A's mail server, they will continue to receive mail to their legacy addresses/domains
(companyb.com) for a period of time. B already has objects defined in A with a companya.com SMTP address. Is it possible to prestage B's objects with their legacy SMTP addresses, while at the same time allowing users from A to send messages
to B's legacy SMTP addresses and have it route out to the internet and not to B's local mailbox?
I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?
No. If the exact SMTP address exists in the org, it will never leave the Exchange org when sent from an authenticated user.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem. If I wanted to use a wireless cellular connection to the internet, how would I do that?
If I wanted to use a wireless cellular connection to the internet, how would I do that?
The wireless cellular device would need to have an Ethernet port, to provide an Ethernet signal to the Time Capsule's WAN port. -
My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.
I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees). -
If I just wanted to play games and surf the web, would a VGA adapter or an AV adapter be better? For my iPad 2? I asked my family for a VGA adapter for Christmas and I'm not too sure if it's the one I want. Also, what is the difference?
HDMI Adapter
Maybe you are looking for
-
How can I get a file path element in XML to work in AI javascript?
Hi all - this is my first post. I'm pretty familiar with javascript, but I'm new to the Adobe scripting environment. Our client wants Illustrator at startup to load a certain pattern swatch. It works fine when I hard code the pattern file path, but i
-
Apple Id was set incorrectly, so the verification emails do not come through. Now my new iPad is locked in to an apple id that I cannot verify and so I cannot use download any apps that I need. Does anyone have solutions?
-
Forgive me if this question is answered elsewhere - I did an exhaustive search and cannot find a definitive answer. I have a friend with a PowerBook G4 1GHz. I believe it is model A1010 and as near as I can determine, it has a factory installed Super
-
What is the concept behind MASTER_IDOC_DISTRIBUTE
What is the concept behind MASTER_IDOC_DISTRIBUTE ?
-
Issue of caching Locale with sap-locale parameter
Hi, We have a standalone WDJ application (no EP)which receives sap-locale URL parameter for I18n support. The application always caches the language with which it is shown on browser for the first time. The application is not recognizing the locale e