I want to put unable only the form in use!!

hi!
jdeveloper 10.1.3.0.4
i have a mdiform(mainForm) and that mainForm call a internals Frame.
when i have a internalFrame(Internal A) in runtime, InternalA call an InternalB.
When internaB have a focus, i want to can use only InternalB, all the forms must be disabled.
how do can i do this?

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

Similar Messages

I can't print my PDF form after it is filled out. Only the form prints not the text that I put in

I can't print my PDF form after filling it out. Only the form prints and not the text I put in.

That's a limitation of Apple's AirPrint framework that Adobe Reader depends on. We are considering an alternate solution that may resolve this issue though.
Thanks for your feedback.
-Gaurav

Want to get back on the former firmware: h

Hi!
I have downloaded the new firmware and I have got the same bug as the other with energy drain when the player is off. Actually, did Creative eventually heard the problem? The only thing I have seen is that they removed the firmware from their website.
Anyway, I want to get back to the former one the .02.05 How shall I proceed to ensure the good working of my Zen?
Thanks for reading!!

I think there's a cover all warning that it might reformat the player and therefore you should backup. As long as you're on a v firmware it won't reformat, but you should always backup anyway when doing something like a firmware upgrade (and in my opinion you should always backup full stop).
With the firmware reload, you just run the function from Rescue Mode, and it will take a few seconds. Then you connect the player to the PC straight after this (don't turn it off and on) and run the firmware upgrade.

I just got my ipod from my dad and he has all of his songs on there from his mac, and so now he gave the ipod to me and i want to put all of the songs on MY computer onto my new ipod and take all of the songs of that my dad originally had.

i just got my ipod from my dad and he has all of his songs on there from his mac, and so now he gave the ipod to me and i want to put all of the songs on MY computer onto my new ipod and take all of the songs of that my dad originally had.

When you connect the iPod to your computer and go to the Music tab to select which music you want to sync, iTunes will pop up a dialogue box that if you sync your music it will replace the music that is already on the iPod.
Since that sounds like what you want to do, just click ok and then sync.

I have Microsoft office on one of my iMacs at home and want to put it on the other 2. How do I do this?

I have Microsoft office on one of My iMacs at home and want to put it on the other 2 iMacs. How do I do this?

Unless you have a version with multiple serial numbers provided then you cannot install it on other computers. Otherwise, use the installer on the DVD or downloaded disc image. Register each installation with one of the additional serial numbers received with your original purchase.

HT5642 my iphone has the software 6.1.3 the latest and i want to put on it the older the 6.0 how do i do it

my iphone has the software 6.1.3 the latest and i want to put on it the older the 6.0 how do i do it

That is not supported by Apple, once you move up in an iOS version you cannot downgrade. The files for the lower iOS are no longer available.

I WANT TO PUT SEVERAL BULLETS IN ONE CELL USING NUMBERS. ANYONE KNOW HOW?

I WANT TO PUT SEVERAL BULLETS IN ONE CELL USING NUMBERS. ANYONE KNOW HOW?

if you want to put some variable number of bullets you can use the function :
=REPT("•", A1)

I am trying to create a Form that will act as a list. I want to import data into the form from exce

My table has a list of names with product information in corresponding columns. I want to create a form that I can import this into where every row makes a new part of the form list I create. Is this possible?
Example of what I have in excel:
Name
Product 1
Product 2
Product 3
Total
a
1
2
3
6
b
0
3
4
7
c
1
3
4
8
d
1
3
5
9
Example of what I want in Form:
Customer a 1 2 3 6
Customer b 0 3 4 7
etc.
I want to put this info into a form to make it more presentable. Can anyone help me with this?

Look at the Import/Export form data functionalities already built-in into Acrobat.

I want a preview for only the pick image

I sync my photos with an iPod. As such I only want to sync the images that are picks. I edit virtually every single image in my library, so as it is if I have automatic generation of previews turned on, all the images including non-pick ones in each stack will have a preview. This causes 2 or more versions of the same image to be put onto the iPod not just the best one.
For the past few months I have had automatic generation of previews turned off, and I generate them by hand after I finish editing a batch. This is a little time consuming and I often either forget to generate the previews or somehow I manage to generate previews for all images in a stack. Aperture doesn't help because it doesn't show which images have previews and which don't.
Rather than manually going through each stack and seeing which images have previews, I'd like to automate the process somewhat to make sure that only the picks have previews. Is there an easy way to do this?
I've thought about selecting all, then opening all stacks, then inverting the selection, and deleting previews from those selections. Then inverting the selection again and updating the previews. I'm not sure if this would work and I'm a bit scared to do this on a large library (opening all stacks in a selection of 10000 stacks could take a few days?)
I wish Aperture had better handling of previews in this regard.

Problem with creating a smart album is that all images would show up in that one album on the iPod and I want them somewhat separated, even though no hierarchy of folders on the ipod makes that a bit of a paint too.
I am currently trying the select/invert method. I'm doing it one album at a time so it's more manageable. At the same time I'm able to make sure I have the correct image as my pick, and also forces me to reexamine what photos I have in my albums and delete any stuff that isn't worthy It's working pretty well, though it is time consuming. Once I'm done I'll have to be careful to make sure only the picks get a preview.

Is there a script that would allow unique disc names on double albums? (I don't want to put them in the album title or comments.)

I have iTunes 11.2.2, and I've recently made use of iTunes' "disc x of y" feature, instead of entering the disc number in the album title like I used to. I made this change because putting disc numbers in the album-title field makes the two discs appear as two separate albums, with the artwork appearing twice, which I didn't want. The downside of using the "disc x of y" feature, however, is that for double albums where the two discs have unique titles, rather than the default "disc one" and "disc two" -- say, for example, the Red Hot Chili Peppers' album Stadium Arcadium, where the discs are called "Jupiter" and "Mars" -- there is no way to label the disks with their unique titles and still keep them within one album entry. I don't want to put these titles in as a comment or anything like that either. What I'm really wondering is whether it is possible to write a script that would allow me to change where it reads "disc 1" to a unique title, at least within the album section of iTunes.

Certain tags are limited as to format. I am pretty sure the disc number field only allows numeric entries. You can send feedback to Apple suggesting changes in iTunes but since this is a somewhat unusual feature I doubt it will be high priority.
http://www.apple.com/feedback/itunesapp.html

Fillable forms: submitting only the form page

I created a 12-page conference brochure in InDesign CS3. Only 1 page has the conference registration, and after exporting the ID doc to PDF (Acrobat 8 Professional), I found it easy enough to make it fillable, and everything works. However, I can't figure out a way to submit just the 1 page with the form. That is, the recipient of the filled form ends up getting the entire pdf back.
Is there a way to have it send back only that 1 page or maybe even just the info that was entered in the fields?
On a related note, I am also unable to figure out the difference between the various export formats (under "Submit Form Selections"). That is, the difference between FDF, XFDF and PDF (the complete document). They all seem to produce the same result in my many, many, many tests.
I'm sure my 2 issues are connected, but it's all a blur at this point!
Thanks in advance,
Andrea

Ok, I just read SimonATS' thread, "Can I save a filled out PDF form using the free Adobe Reader?" and it was very helpful. I didn't read it before I posted my problem because the title asked a question I already knew the answer to, so I thought I didn't need to read it.
Thanks anyway! :)

I want to have users submit the form in PDF format but it doesn't work using the email submit button

Hi all,
I have a form that I want to be returned to a specific email address as a PDF File. This is so that reservations people can open the pdf, and extract the information from it. Keeping it as a PDF will allow them to easily read and use the form.
When I use the "Add and Email Submit button" approach, as outlined in the "How to" area, everything works fine, except that the format of the submitted file is in xml, not Pdf which is what I need it in.
I then tried adding a Button to the document from the Library, and set it's "Control Type" to "Submit". This provided me with the submit sub-tab, where I set the "Submit Format" to PDF. In the "Submit to Url", I entered the following - "mailto:[email protected]" (without the quotes)
The first approach works, but is not in the PDF format that I need (I believe).
The second approach keeps giving the following error when one selects the submit button - "This operation is not permitted".
We use Lotus Notes (yes, I know...not my favorite either, and it may be the problem here).
Any help that might be provided is greatly appreciated!!
Rob

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.) Only the user-entered info should print on the pre-printed form. Users will use Adobe Reader to complete their templates; they do not have Acrobat. Thank you!

Use the template as non-printable background and add the form fields.

How to export only the form field data in an XFA form when data connection is used

I have used xml data connection to populate the values in the dropdown. The data to be loaded into the DropDown is very large , So I have used data connection using xml scheme.
Then I used export data functionality to export all fields in the form to xml.Insead of exporting all the fileds it just export the values of the dropdown which has been binded through Xml Schema.
I am not having the licenced version of Adobe Life Cycle. Could you help me solving this issue ? I just want both the data binding and the export data functionality.
Thanks & regards,
Karthikeya

If you could use the below command you can get all the field values from the form.
xfa.data.saveXML("pretty");
Thanks
Srini

Can I script an email button to put one of the form fields in the subject line and to name the form?

This is a fillable form on a website. We want people to complete the form, then click on the email button to send it to us. Prefer to have the "name" field populate in the "subject line" of the email, and also rename the form that same field name. Is that possible?

In the sample I used the below syntax to send an email..
event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
The highlighted ones are local variables which will hold the value from the form fields.
If you want to get the Subject from Name field in the form, use some thing like this.
     var strSubject = name.rawValue;
     //and then pass the value to the code.
     event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
Hope this helps..
Thanks
Srini

I want to put unable only the form in use!!

Similar Messages

Maybe you are looking for