I want to re-record a lead vocal after I'm well into the mixing process...

a huge no-no, and this is probably the reason why: I can't get the delay off my voice! I created a new track for this vocal, so there are no plug ins there; I greyed out each of the mastering plug-ins on the Out 1-2; I muted all the tracks with sends, as well as the bus tracks. Still, there is delay on my voice when I try to record - how can this be? There is NOTHING on the track that I'm recording to, and NOTHING on the Out 1-2. Help!
Thanks...

There is no way to remove all the delay related effect (phasing at least) if you are monitoring BOTH your interface and your post logic throughput. You can choose to listen to logics throughput INSTEAD of your interface, and with the buffer set low enough, still have a reasonably low latency to be able to record. I do this wit my guitar all the time so I can hear it through Guitar Rig. But if you are listening to them both you will hear weird phase cancellation or echo if your buffer is higher.

Similar Messages

I want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?
== This happened ==
Not sure how often
== i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

Firefox doesn't store the bookmarks as separate files in a folder, but uses a sqlite database file with the name places.sqlite.
You will have to export those favorites in IE to an HTML file and import that file in Firefox.
Bookmarks > Organize Bookmarks > Import & Backup > Import HTML : "From File"
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

I want to copy and paste a long list of phone numbers into the 'to' field of messages. Ideas?

I want to copy and paste a long list of phone numbers into the 'to' field of messaging. All it does is become one long number instead. I have even tried commas in between. Any ideas? (They are NOT contacts)

That's not how iMessage was designed to work. It works with your contacts. You start typing a phone number or email address and you'll se a list of hint from auto-complete. After you select a suggestion, start typing another address. If the addresses you want are not in your contacts, you'll need to enter each of them manually.

Bought PE 13, installation and registration OK. Want to access 'Help / first steps...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!

I can only repeat: I Bought PE 13, installation and registration OK. Want to access 'Help / first steps'...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!
hakune
P.S. the way to get through to be able to post my problem is not very userfriendly.

Pe won't contact net please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation servers.

I rented a movie directly from Apple TV. I finished downloading successfully, however, I didn't start watching it right away. Now, a day after, I want to watch it, but ATV tells me I have to start the downloading process all over again. WHY?

I rented a movie directly from Apple TV. I finished downloading successfully, however, I didn't start watching it right away. Now, a day after, I want to watch it, but ATV tells me I have to start the downloading process all over again. WHY? I thought after sucessfully downloading the movie to ATV, it would be available for 30 days in my ATV, without having to download again. To my surprise, it tells me I have to download all over again. It took me 3 hours to download the movie, now I have to repeat the process? Can someone tell me why? Thanks.

Welcome to the Apple Community.
The Apple TV will delete content if it is used to plat something else or is turned off. It only has a limited amount of volatile memory.
If you want to download something for watching at a later time, it would be best doing it from iTunes on your mac/PC and streaming it to the Apple TV when you are ready to watch it.

I have version 4.1.2 and recorded a lead guitar track (live classical guitar) using the acoustic guitar echoes (flange enabled). Now, when I burn a CD, the guitar track is very weak. Any clues?

I have version 4.1.2 and have been doing great rercording for several years. I use only real instruments. This week I added "acoustic guitar echoes" to my classical guitar, and that enabled the "flanger" setting which is what I wanted. Mysteriously, every time I burn a test CD, that lead guitar track is very weak, even though the recording level is quite high. Nothing I have done has helped the mix. Does anyone know why this is happening and what I can do to circumvent it? I've tried burning straight from GB to a CD and also via Itunes; it doesn't make any difference. Thanks.

P.S. I usually record my classical guitar on the "vocal" and "live performance" settings, using my Blue YETI mic, set on stereo. I get great recordings which always transfer perfectly to my CDs. I'm puzzled why adding the acoustic guitar echoes would be failing in the burn process. Hope this clarifies.

TS1315 I have just purchased the new iPad with the camera connection kit. I just want to bewant to be able to insert my SD card into the Pad and only view my photos, not import them to the pad. Can this be done and how do I do this. Please advise. Thaj

I have just purchased the new iPad with the camera connection kit. I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how? Please advise. Thank you.

See this article: iPad: Using the iPad Camera Connection Kit
No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
Regards
Léonie

Powershot SX510 HS automatically stops recording video after 10 - 15 minutes into the recording.

Powershot SX510 HS automatically stops recording video after 10 - 15 minutes on continuous recording. Is there a way to turn this off? I would like to record videos until either I press the stop recording button, or the battery gets low. I have turned off all the power saving setting, at least I think I have.
Solved!
Go to Solution.

The camera has some recording limitations as all the Canon models do. Below is how you can extend your recording times to a max of about 1 hour but there is a 4BG limit regardless so once it hits 4GB the recording stops and has to be restarted.
Also the memory card needs to be at least a Class 6 rating or the recording will stop sooner regardless of the clip size.
This is from page 161 of your manual

When wanting to remove unwanted applications from my Mac, does dragging them into the trash COMPLETELY uninstall the software?

My 2010 Macbook Pro that is running on OS X Mavericks (10.9.4) has been running rather slow lately because of all the files I use for work. I have gone through and deleted all the unnecessary applications by simply dragging them into the trash, but I am curious, does this ACTUALLY uninstall the application? My reason for asking is because in some cases, when dragging the app to the trash, the app simply just says, "Move to trash" and other times it says, "Uninstall application." Like I said I want to clear up as much space as possible to get my laptop running a bit faster.
And yes, I am already in the process of ordering new RAM to help speed up the computer as a whole, but I would like some help in UNINSTALLING unwanted applications, and am also open to any other ideas on how to speed my computer up. I am EXTREMELY tech savvy when it comes to computers, especially Apples, I just can't seem to figure this one out.... HELP ME!
Thank you in advance

Have a look at this video tutorial on how to uninstall applications completely on Mac OS X, something apps like AppZapper and AppDelete are not able to do yet.
And unless you have a 250 GB HDD with less than 5 to 10 GB of free storage, freeing up storage space will not make your computer run faster.
Maybe think about getting an SSD as system drive, it speeds up your Mac quite considerably.
As for other tricks:
Performance Tips For Mac OS X
Mac Performance Guide

HT1430 why does my ipad asks me to keyin password everytime i want to access my Yahoo.Account but after I have keyed in the password, it gives out : "Yahoo! Server Unavailable. Pls try again later." and i have been doing this for the past three days witho

Why cant i access my Yahoo emails?
why does my iPad ask me to key in my password everytime i want to access my emails, and after doing keying my password it gives me a notice" Yahoo! Server Unavailable. Please try again later"? but i have been doing this for three days. but if i use directly my Yahoo browser, i can access my mails.

thanks for the reply, but have tried it several times, but still not successful.

I just hooked up my I pod 4th gen to down load songs and it said it wanted to download new version of software after download it went into restor mode...will i loose all pictures and songs?

I just hooked up to my computer to down load new songs it said new version of software is avalable, after down load I pod went into restor mode. Is there any way to get it to work beside the restore? and will I loose all my photos and vidios?

Best Not to interupt the Update Processs...
See Here for Details on what is happening...
Updating to iOS 5
http://support.apple.com/kb/HT4972
Post back if you have any issues...

I purchased the new iPad wifi only and now i want to know if it's possible to exchange this iPad into the new iPad wi-fi + 4g?? Money isn't a problem. I can pay the extra money for new iPad. Is it possible ? I'm from germany.

Thank you for your time

You can use an iPhone as a personal hotspot (if your carrier supports it), or get a mifi device and use that as a mobile hotspot for it - the iPad will see them as wifi networks.

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

ECATT abends during recording when lead selection is set to 0 on web dynpro

We have a web dynpro application that works ok when running by itself.   When we tried to record ECATT testing on it, it abended after we click on a selection from a list of values.    The error on the browser indicated an error on the "lead select".   After reviewing the dump, we found that it abends on an exception when the lead selection on the ALV is not set.   When we changed our code to set the lead selection to 1, the ECATT recording worked.
We have a requirement to set the lead selection of ALV to 0 so we need to change back our code.   We just did the setting to 1 just to get ECATT recording to work for now.    Does anybody know why ECATT requires this?   Is there a support packs that fixes this?
Here is a snippet from ST22 for more details on this:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_CONTEXT
Date and Time          2007/02/07 14:50:06
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CONTEXT_NODE===========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
The lead selection has not been set. VIEW_TABLE
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
"CL_WDR_CONTEXT_NODE===========CP" or "CL_WDR_CONTEXT_NODE===========CM00V"
"_RAISE_ELEMENT_NOT_FOUND"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "torsapd01"
Network address...... "10.2.75.183"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "TORSAPD01"
Database type..... "MSSQL"
Database name..... "PR3"
Database user ID.. "dbo"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Aug 28 2006 22:20:27"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 75
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16128
EM...... 16759616
Heap.... 0
Page.... 0
MM Used. 12713776
MM Free. 4042608
User and Transaction
Client.............. 200
User................ "SIC0010"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDR_CONTEXT_NODE===========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "10.49.77.47"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/webdynpro/sap/zpr3_base_price/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_CONTEXT_NODE===========CP" -
in "_RAISE_ELEMENT_NOT_FOUND".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 11
of the (Include) program "CL_WDR_CONTEXT_NODE===========CM00V".
Source Code Extract
Line
SourceCde
1
method RAISEELEMENT_NOT_FOUND.
2
data: l_count type I,
3
l_node_name type string.
4
5
l_node_name = if_wd_context_node~get_path( ).
6
7
l_count = if_wd_context_node~get_element_count( ).
8
if l_count = 0.
9
raise exception type cx_wd_context exporting textid = cx_wd_context=>NODE_EMPTY node_nam
10
elseif element_index = if_wd_context_node=>use_lead_selection.
>>>>>
raise exception type cx_wd_context exporting textid = cx_wd_context=>NO_LEAD_SELECTION n
12
else.
13
raise exception type cx_wd_context exporting textid = cx_wd_context=>ELEMENT_NOT_FOUND n
14
endif.
15
endmethod.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
E
SY-MSGID
TD
SY-MSGNO
600
SY-MSGV1
000003587101
SY-MSGV2
0001
SY-MSGV3
EN
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070207
SY-UZEIT
145005
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT

Hi Eugene,
i suggest you raise an SMP ticket for these.
Looks like a bug at first glance.
regards
Phil

I want to re-record a lead vocal after I'm well into the mixing process...

Similar Messages

Maybe you are looking for