I want to remove a specific noise

Hi.
To the point - I have some lectures with constant backround shaking sound. I've tried all noise/hiss reduction options, and also third party plug-ins. They help a little, but I want to try a different approach which I hope is more effective. I want to cancel or cut out this specific noise. But I don't know if that is possible. I've added a picture to show how it looks like. You see those small ripples? So I hope that if there's a way to make Audition to recognize them and to cut them out, that would clear up most of the noise. Could that be possible? I appreciate any help. Thank you.

Hi everyone.
So I tried spectral view, I never used it before, but I'm getting the point. The thing is that this noise is constant and also widespread, so there's no question of manually brushing it out. A magic wand tool like in Photoshop would be great in this regard. That would do the job to eliminate rattling. Mikromidas mentioned about markers, but I don't see a way to automark all the rattling noise in a way to set in and out markers to isolate the rattling. And then how could I create a script which tells Audition to clean up audio after certain intervalls?
So I guess I have to accept the results Im getting by using click/pop eliminator plus some hiss removal. Thanks for the input, atleast I know I tried all the options available, and got a little more experienced.

Similar Messages

Removing ambient traffic noise

I have a project that I would like to remove ambient traffic noise that exists under a subject interview. I witnessed a very cool feature of STP2 at NAB 2007 using the Frequency Spectrum. They could isolate the specific frequency of the ambient noise and delete it. I can't for the life of me figure out how they did it now that I have purchased FC2. It seems to me they were able to view the frequencies in 3D in order to separate and delete the appropriate band. I've used the "set noise print", "remove noise" but that didn't work and they weren't the tools used in the demo. I spoke with Apple Support today and they couldn't come up with the tool I attempted to describe.
Any help would be greatly appreciated. I've scoured the net, the forum and discussion groups but haven't come up with the solution. Thanks.
- Greg
PowerMac G5, 2.7GHz, 4gb RAM Mac OS X (10.4.9) Editing DVCPro HD
Mac OS X (10.4.6)

Click on the file you want to edit in the timeline, and then click on the "File Editor" tab in the area below the timeline (you could also do this by opening the file directly, which would cause the waveform to appear in the upper middle section of the window.
When the waveform appears, click on the upper-rightmost button in that section, which will switch the display to the spectrum view. Then select the "Frequency Selection Tool", which has the same icon but on the left part of that tab.
Then you can select parts of the spectrum and press delete to remove noise.

HT4207 how can I remove a specific gmail account from my ipad 4?

How can I remove a specific Gmail account from my ipad 4?

Assuming you are not syncing with iCloud and you mean, syncing with iTunes only...(you can only use one or the other for syncing to prevent duplicates)
iTunes -
- Open iTunes on your Mac. Connect your iPad. Then click on your iPad (either its name or just "iPad"), then click the info tab (right above the photo of an iPad in the middle). From here you can select sync contacts, then sync groups, and select the groups you want and choose Apply/Sync in the bottom left corner.
iCloud -
- With iCloud if you just sign into iCloud in System Preferences and turn on Contacts, it will prompt to merge all of your contacts that are not already syncing with Gmail or Yahoo!, etc. so there really isnt a way to pick and choose as much with that.
- However if you really want to use iCloud and not iTunes, you could import the contacts that you want into iCloud.com, but you would need to export them from your Contacts App on your Mac and then import them into iCloud (VCard / .VCF is the format you want).
* Exporting the contacts from your Mac Contacts Application --> http://mac.tutsplus.com/tutorials/app-training/contacts-101-a-beginners-guide-to -contacts-on-os-x/ (further down the page)
*Importing contacts into iCloud.com - http://support.apple.com/kb/PH3605
**NOTE - Remember if you do the import into iCloud.com method, DO NOT sign into System Preferences > iCloud, and choose to MERGE contacts. If you do this later, all of your contacts will merge with iCloud and you will have duplicates of this group.
I hope this isnt too confusing. Have a good night!

I want to remove volumes from 'Import' - 'Select a source' list

Hi all,
First, I'm using the new Lightroom v4.1 on a Windows 7 x64 system.
As the title to my question suggests, I'm trying (without success) to remove volumes from the list that's shown when a user clicks on the 'Import' button (lower left of screen) and 'Select a source' which, naturally, shows all the drives in my system.
There are five volumes; four internal and one external.
There are only two drives which contain photos that I'm interestered in importing/editing.
The other drives contain files that I have no interest in editing or organizing.
For example, several hundred (scanned and collected) very old family photos that I wish to keep pristine, with no editing of any kind. As for placing them in collections, I already have them in dated, carefully named folders.
So, as this is a shared computer, I want to remove the volumes (drives) so that the aforementioned photos can't be inadvertantly imported.
Can someone please point me in the right direction how to do this?
Thank you.
Yours,
Hugh

There is nothing within Lightroom that will cause it to ignore a specific drive permanently. You'd have to go above Lightroom to the system level to prevent Lightroom from seeing the drive. Not sure how to do that, but it's probably possible.

How do I removing a specific item from an Array?

Hi there.
I am having an array of movieclips and when my circle(controlled with the keyboard) hitTests true with one of the movieclips inside that array i want to remove that movieclip from the array so when i hitTest it again it returns false (I hitTest using a "for in" with that array).
How do i remove a specific item from within an array?
Can someone help me? Thanks a lot.

i haven't noticed anyone showing deference because of the points. in fact, i've seen some people (a minority, to be sure) be just obnoxious about it. i never encountered that before: some people feel they have power because they can dole out points.
but overall i agree with you: the loss of the list of threads i am participating in, along with the most recent posters name, is a significant drawback of the new forums. and there's nothing new in these forums that offsets that drawback.
in addition, i think we've lost way more than 1/2 the older threads. that's a lot of information that's no longer available.

Removing head switch noise from VHS video

Hi experts,
I have imported a video from a vhs videorecorder - and now I want to remove the head switch noise by shifting the entire video 8 lines down and insert 8 lines black at the top and bottom.
How do I do this with Premiere Elements 11?
Thanks a lot for your help!

joeK
I think that the scale up ever so little (with Constrain Proportions Off) would have been the best, but if your image has problems with that (and as Hunt says can live with black bars), then
Approach 1 - On Screen Image Moved Down
The just moving the screen image down far enough to hide the switch head noise at the bottom of the frame. To do that:
a. Click on the image on screen, and use the mouse cursor to drag the image downward far enough to hide the switch head noise bar.
or
b. Highlight/select the Timeline clip, go to Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, and increase the second value for Position to move the image downward on the screen.
The black at the top of the image that you generate in this process is not the color black but rather the program using black to represent transparency.
Before Position second value = 238.8 in this example
After Position second value = 250.8 in this example
Approach 2 - Cropping out Noise
Go to xf Effects/Transform/Crop and drag the Crop Effect into the video on the Expert workspace Timeline. Then adjust the Left, Top, Right sliders so that the image is not cropped at any of those edges. Move the Bottom slider from 0 upward to replace the switch head noise with transparency/black border at bottom.
Please review and then let us know the outcome.
Any questions or if clarification needed, please do not hesitate to ask.
Thank you.
ATR

Using Mac, how do I remove the hiss (noise floor)?

Using Mac, how do I remove the hiss (noise floor)?

Hi! Well, at the most simple, Audition has a noise reduction effect...try Effects/Noise Reduction/Restoration/Noise Reduction (Process). Highlight a short section of your clip featuring just noise, not any sounds you want to keep. Turn the amount of NR down on the sliders to, say, 20% and the Reduction to, say, 10dB, hit "Select Entire File" and Okay it. If the noise is bad, you're best off to do several passes at low processing settings. Turn up the FFT size (on the Advanced menu) and grab a new noise sample between each process. FYI, the reason for doing it 3 or 4 times with small increments is that it results in a lot fewer unpleasant artefacts.
However, as others have said, use of Noise Reduction should be a last ditch option, not a normal part of the process. I have 3 different M Audio interfaces now and none give me enough noise to worry about. As a first guess from your description I wonder if it's your microphone that's noisy and, if so, no amount of playing is likely to fix it...the noise goes up and down along with the programme material as you adjust the levels.
So...a bit more info and maybe we can make some suggestions for you.

I want to remove my windows password, tells me "required"?

I want to remove my windows password and I get a prompt saying that the account policies require a password! What account!! Isn't this my computer? I do not want to have to sign in constantly!
This question was solved.
View Solution.

Scott, welcome to the forum.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Here is a guide that will help you logon automatically using Win 7. If you are using another OS, you can search for a guide for it. This works great if you are the only user. I use this method everytime that I reinstall my OS.
Please click "KUDOS star" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Removing Florescent Light Noise "Hum" from Audio Tracks using FCEHD

I have some clips taken under florescent lighting where the hum was discernable even during the sound check. (I was using external Electro Voice hypercardiod XLR mikes plugged into my Sony DCRVX2100, powered through a surge protector, monitoring the audio with Bose QC2 headphones). Using the same camera, cables, and mikes under incandescent lighting that day was fine - no hum.
Attempting to filter out the hum using the FCE Hum filter wasn't dramatically effective, even with repeated tests establishing that using a frequency of 60 hz, a Q of 40, a gain of -48, and the 1st and 3rd harmonics provided the most benefit.
Additionally I tried again with the FCE 31 band EQ filter, anticipating that the 50 hz and 60 hz filters would provide very specific improvements. Also tried were the LowPass Filter and the 3 band EQ.
I'd like to clean up the otherwise fine audio - any suggestions? I am considering buying a filtered power conditioner as I know that some of the problem can be "dirty" electricity resulting from the ballast of the florescent lighting.
Also, I noted that the numeric values shown for the gain using the FCE 31 band EQ filter oftentimes lagged behind the setting of the slider: returning the slider to the middle "0" position frequently didn't change the previous value of the gain shown. Is this another indication that I should just upgrade from my PowerBook G4 with 2 Gig of RAM?
Thanks!
James Mackay

Hello Jim,
And welcome to the Final Cut Express forum.
You are correct that the ballast generates the hum. Power conditioning is probably not going to reduce or eliminate it, because the old ballasts are magnetic. The only way I found to eliminate fluorescent noise at the source is to replace the ballast with an electronic one or replace the entire fixture with a T8 unit (they use electronic ballasts).
Removing that hum probably can't be done in FCE. Sound Soap can probably do it however, with it's ability to +learn noise+ and then remove that specific audio. The regular Sound Soap works as a plugin for Final Cut, which enables you to apply it within FCE.
At present there is also an 'SE' version available at 50% off however it only works in standalone mode, which means you would have to export the audio track from FCE, clean it and then re-import back into FCE.

OS 4.6 wants to remove Docs To Go!

I have an AT&T Bold which comes with Documents to Go version 1.001.145. However, after registering and checking for updates, the application was updated to version 1.005.030 (even though it still says 1.001.145 in the Applications list!).
I have Desktop Manager 4.6 installed, and installed AT&T's BlackBerry Bold 9000 OS v4.6.0.167 - same as the version that came with the Bold.
Here's the problem. If I have the Bold OS installed, when I go to add an application using the Application Loader, the App Loader doesn't recognize Docs to Go and INSISTS on removing it. I tried removing DocumentsToGo.alx as well as all the DocsToGo*.cod from the OS and Java directory, as well as removing the reference from specification.pkg, but it still insisted on removing the application!
My temporary work around was to rename the OS directory to "9000-v4.6.0.167_P4.0.0.157.$$$" which stops Loader from wanting to remove Docs to Go, but what am I supposed to do if I decide I want to make a change in the OS?
As it stands now, it appears that what I'd have to do is allow Loader to remove the updated application, then run Loader again to reinstall the older version, re-register the newly installed application, and then update again! That's a bit much!!
I'm guessing that Loader doesn't like the fact that the application SAYS it's version 1.001.145, but all the COD files say it's version 1.005.030 and wants to remove the conflict!
I tried going to the DataViz site for support, but was directed to the BlackBerry support site - where there was nothing available!
RIM / DataViz, it is impolite to point - especially at each other! This is a STUPID MISTAKE! Is one of you (DataViz - it looks like it's YOUR mistake!) going to fix this?
Jerry

If I go to application loader - it says, "downgrade" on my words to go. Wonder how to fix that
Nurse-Berry
Follow NurseBerry08 on Twitter

Family sharing one Itunes account, want to remove all of their computers content from my library... help

My family shares one Itunes account and I believe it was home sharing that brought all of their music, purchases, movies, etc. onto my Mac's Itunes Library. I want to remove all of their content from it. I turned off Homesharing and that didn't work. All of their music is on my computer and synchs to my Iphone and it's driving me nuts. Please help !

You can deauthorise all 5 at once, then reauthorize the one you want.
Learn how to authorize or deauthorize your computer with your Apple ID.
http://support.apple.com/kb/HT1420
You need to log into iTunes on the computer you want to deauthorise. Otherwise, contact contact iTunes Store support to see if they can help.

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

I am trying to load a movie onto my ipod touch and it is wanting to remove all my apps

I don't want to remove all my apps. I just want to load a movie.

What exactly happens when you try to redownoad by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
What exactly happens whne you try to download a free app?
Are the apps "waiting"?
http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation

Items on ipod that do not show up on Device list, want to remove them

A pod cast and a video I downloaded from itunes and copied to my ipod are on my ipod but when I connect the ipod they do not show up on the lists of items on the device. I can see and play them on the ipod, but cannot find them on the list of items on the ipod when I connect to itunes...
I want to remove them and can't
baffled....

They should be able to help you. You must have the iPod set to manually managed. Podcasts generally work best when set to auto-sync.
To find these files it is easiest to create a smart playlist on the iPod itself with the right rules to find the files while it is set to manually manage. To delete files through a smart playlist you will need to hold the "Alt" key on the keyboard then hit the Delete key. Atl/Delete is for Mac but may be a combination of Delete and Shift, Control, or Windows key on Windows PCs.

I want to remove a specific noise

Similar Messages

Maybe you are looking for