I want to remove the Save option and only have Save As available

I have a form I downloaded that only has Save As as an option when saving.   Save is greyed out.  My form has Save and when I use it, I get a message that says "the document could not be saved.  The file may be read-only..."
How do I remove the Save option and only have Save As availabe?  I'm using Adobe X
Thank you!
I tried to upload a picture, but kept getting the message to try again in a few minutes.

If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product you use
This forum is not to discuss products

Similar Messages

  • I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

    How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
    Thanks
    Eric

    Eric,
    these applications are applogics which are not controlled by the
    iasdeploy tool. Unfortunately, there is no tool available to remove
    these applications for you. What you can do is to manually remove all
    their entries, but be careful if you do that. If you remove the wrong
    keys you might break your ias installation, so be warned and make sure
    you backup the whole ias registry before attempting to remove anything.
    Eric Coleman wrote:
    >
    I want to remove the COnlineBank, OnlineBank and csample applications
    from my application and web server.
    How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
    and "iasdeploy removemodule" with no luck. I want to clear all of
    this demo stuff out to make both the web and app server look more
    production like.
    Thanks
    Eric
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!--
    Han-Dat Luc ([email protected])
    Senior Consultant
    SUN Professional Services (iPlanet)
    o .
    o .
    O _ ____ _ _
    (_) _ \| | __ _ _ __ ___| |_ TM
    | | |_) | |/ _` | '_ \ / _ \ __|
    | | __/| | (_| | | | | __/ |_
    |_|_| |_|\__,_|_| |_|\___|\__|
    e-commerce solutions
    Sun Microsystems Australia Pty Ltd

  • HT2534 I don't get the none option, I only have "amex,visa...". what should I do?

    I do not want to give my credit card when getting register in itunes. I don't get the none option, I only have "amex,visa...". what should I do?

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (must be a valid email address; don't use the one you have created earlier)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • TS3694 My IOS is 4.3.5 and i have jail broken the iPhone and now i want to remove the jail brake and update my IOS to 6.1.2 and i cannot upgrade the software or restore the software, i keep getting the 3194 error and i even tried to while in DFU mode, sam

    i have tried to upgrade the software and i get the 3194 error message, i have tried restoring and i got the same error and i also tried while in DFU mode and still got the same 3194 error message.
    I really want to remove the teathered jail break and upgrade the software so if anyone knows how to get that done please let me know i would really appreciate it.
    Thanks in advance

    http://support.apple.com/kb/ts3694#error3194
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • PDF files used to open with a "save" option, and I have Acrobat 9 Pro installed on my system (running Windows 7). Now, that icon is gone and I can't save. Is there another way to configure the plug-in or is Firefox preventing this or what? THANK YOU.

    this is a new problem. Running Windows 7, latest update of Firefox 3.6.13. Under "Applications", I'm set to "open Adobe Acrobat inside Firefox" (which is what I have always done, then if I wanted to, I saved the PDF file elsewhere). should I/ can I open the PDFs outside Firefox, with my Adobe 9 Pro program?

    ■ Use '''Tools -> Options -> Applications ->''' <br> then look under content for Adobe Acrobat forms etc;
    <br> note a choice of options is usually available
    * see [[Options window - Applications panel]]
    Firefox is of course a web browser. <br>Acrobat reader is Adobe's program used to read and display the pfd files on your computer. Other programs may be used instead of Acrobat reader. You would normally have the Acrobat program and the pdf file present on the local computer, often both on the same hard drive, if you were opening individual pdf files directly with Acrobat.
    Firefox uses a plugin so that it may use Acrobat to open pdf files and display the results within a firefox window or tab. If you do not have that plugin installed, or it is not enabled firefox may be unsure what to do with the file and offer to save it to whatever your default local download location is, without attempting to open the file in firefox.
    ■Also see
    * [[Opening pdf files within firefox ]]
    *[[Using the Adobe Reader plugin with Firefox]]

  • I want to remove the yahoo toolbar and the avg toolbar, but how

    It take a long time to load firefox. I see a avg tool bar, and also a yahoo tool bar. I would like to remove them.

    Firstly you should be able to easily disable them by right clicking on a empty spot on the toolbars and they should appear in the right click popup menu. Deselecting could be enough, but if you are like me and want to remove them completely:
    They should be listed as extensions in your add-on manager. '''Tools > Add-ons''' (or Ctrl+Shift+A)
    When you find it, there should be a few buttons next to it. If you don't see a button that says "Remove", Restarting Firefox in safe mode could sometimes do the trick.
    '''Start > Run, type "firefox -safe-mode" ''' (without the "quotations") '''and hit enter.
    If you still cant find any remove button next to those toolbars you want removed, try to find and uninstall them via windows '''Add or Remove Programs''' that you can find in your Control Panel. '''Start > Settings > Controll Panel'''
    It could often be a headache trying to removing add-ons and extensions, hopefully it goes smoothly for you this time.

  • I want to remove the network announcement, but it is no longer available in the last version

    Hi,
    After updating to the latest version of the airport software, i cannot remove the network announcement that i added in the previous version.
    How can i get rid of this?
    Cheers,
    Arcanoid.

    Your post does not mention whether you "updated" to the Lion operating system, but we will guess that this might be the case.
    If yes, you should download and install AirPort Utility 5.6 for Mac OS X Lion , which provides full functionality.
    You can keep both AirPort Utility 5.6 and 6.0 on your Mac and use the one that you wish.

  • Removing the x64 version and only having the x86 - possible?

    anyone know if i can get rid of the x64 version and go back to only having the 32bit version?
    ~if this were /. this sig would be funny

    "If you mean switch from 64 bit to 32 bit, this is impossible. You would have to completely reinstall
    Windows to change to a 32 bit flavor."
    i'm not trying to change my system architecture. only the version that windows uses as a default for IE.
    "short answer: To
    ensure legacy 32-bit applications continue to work the same way they used to without imposing ugly rules on 64-bit applications that would create a permanent mess. And at the same time, 64 bit application could work more efficiently."
    i don't understand that as an answer, short or otherwise.
    and now that i'm reading Fahad's answer, i'm realizing that he ALSO thought i wanted to change my system
    architecture. that's not it at all.
    to reiterate my problem:
    IE will not export reports from our SSRS using MY 32 bit version, which is the default (obviously, because
    you can't SET the x64 version as default). other people in the office with the same IE 32bit version 11.0.9600.17358IS can export just fine. if i copy and paste the URL from my non-working, 32bit IE into the x64 version of IE, the reports export just fine.
    so i'm trying to figure out whats going on and how to fix it. it seems i have to reinstall windows since
    MS has somehow figured out how to bind IE to kernel or some other deep rooted nonsense.
    "Thanks for your trust."
    hey, you've earned it ;)
    ~if this were /. this sig would be funny

  • I click a link and it opens on the current page and a new tab, how do i keep the first tab on the current page and only have the link clicked on appear in the new tab?

    I go to click a link for any site and it opens the link in the current page and a new tab. I only want it to open the link in the new tab. I want to keep the original tab what it was.

    you can try to write some web driver to do this particular job for you, one such driver is Selenium. know more about it at https://code.google.com/p/selenium/downloads/list.
    But this thing will need a good programming skill. Otherwise you have Adblock plus addon (https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/), you can try this. you can also contact its developer to include this particular facility also in this add on

  • Want to remove the voice option reading out words in sms messaging....please help

    When i type an sms on my iphone 4, once the word is complete a voice reads the word out loud. How do I turn this feature off? Cheers Jen

    Settings>General>Accessibility>VoiceOver>Off.
    http://support.apple.com/kb/ht3577

  • How do I get rid of the title words and only have icons on the bookmarks toolbar?

    The title words are too long and take up too much space, so I have to go to a drop down on the right to see the rest of my bookmarks - it's annoying, when I already know who they are, I don't need to see the words....Thanks for any help.

    No way to just set a preference so they already don't have the words when I save them? Thanks for the response, it will work; and that's all that really matters - it's just annoying to have to do them one at a time (am I techno-lazy or what?! Spoiled! ;-) )

  • How to remove the window options

    Hi,
    I want to remove the windows option like minimize, maximize and close symbol at the end of the windows title bar. wen making exe i click the option and only the main vi able to remove all this but in sub vi's all this elements is been disable.. i want to remove it complete wen it runs.. how to do that? ... plz help.
    another question.
    how to change the menu bar color.. and the font color and style?... need help.
    Thank you

    Not that I know of.
    Just tell her the X can't be removed.
    The customer isn't always right.
    Can you think of any window in any other program that doesn't have an X button to it?  I can't think of an instance.  I can't think of any place besides LabVIEW that can have an X button that can't be clicked.
    Is there a reason you do not want them to click the X button?  You can use an event structure to catch a Panel Close? event for the VI and discard the event so you can run your own code such as ensuring a clean and orderly shutdown of the VI.

  • ViewCriteriaItem - How to remove the All option in mutiselect

    I have a viewCriteriaItem bound to an LOV. This item is enabled for multiselection in search form (by checking the Support Multiple value selection in ViewCriteria UI hint).
    I want to remove the 'All' option from the mutiselect dropdown. Is there a way to remove this?

    Hi RM,
    Thanks of the information.
    I've did as per your reply, even though the column is showing hide the column when right click on the column.
    could you provide other alternative.
    Thanks,
    Ram

  • Removing the java instace and install again

    Dear Admin,
    I have problem in  java instace starting problem becuase of system copy process.
    my system details are
    ecc6.0 on abap+java
    when seen the instace and check the j2ee process list not shown and also gives instace missing error in bootstarp.
    i want to remove the j2ee (java instace only)
    how to remove this ?
    how to install it again ?
    can i install java instace when abap instace is on.
    thnaks and reagards,
    Ravi

    In installation guide have what you want to know.
    remove java instance step;
    You use this procedure if you want to delete a single SAP instance or all instances of a SAP system.
    Note
    Make sure that you delete the instances in the following order:
    1. Dialog instance if there are any
    2. Central instance
    3. Central services instance if there is one
    1. Stop the SAP instance that you want to delete as follows:
    a) Log on as user <sapsid>adm.
    b) Execute this command:
    stopsap r3 <InstanceName>
    2. Stop the sapstart service with the following command:
    sapcontrol -nr <InstanceNumber> -prot NI_HTTP -function StopService
    3. Stop the saposcol process with the following command:
    saposcol -k
    4. Remove the instance profiles as follows:
    rm /usr/sap/<SAPSID>/SYS/profile/<SAPSID>_<InstanceName>_<host_name>
    rm /usr/sap/<SAPSID>/SYS/profile/START_<InstanceName>_<host_name>
    Example
    For example, enter the following commands:
    rm /usr/sap/C11/SYS/profile/START_D00_h0001
    rm /usr/sap/C11/SYS/profile/C11_D00_h0001
    5. Log on as user root and delete the local instance directory:
    rm -rf /usr/sap/<SAPSID>/<InstanceName>
    6. Change to the directory /usr/sap, edit the file sapservices and delete the line that refers to
    the instance to be deleted.
    add-on java;
    Using sapinst in life-cycle menu to select install add-on java instance.

  • I'm having trouble with a toolbar called searchqu that I do not remember installing, it will not allow me to have MSN as my homepage, I removed the add on but still have the problem. Thoughts?

    had an add on installed somehow called searchqu. It will not allow me to have msn as my home page. I removed the add on and still have the same trouble.

    Hi!
    My name is John and I'm a member of the Searchqu support team, I'm here to assist! :)
    When a software was installs onto your pc it offered two basic installs, typical installation, which lists the add-on features such as searchqu default search, and Custom installation, which allows you to select the add-ons that you wish to install. There's no need to worry if you did the typical install - this isn't a virus,
    nor malware, and there's no need to Perform a virus scan against it.
    In order to change Searchqu as your homepage please check the following: http://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
    For visual instructions please check: http://bit.ly/searchqutoolbar
    We are here to help with any further question :)
    The Searchqu support team.

Maybe you are looking for