I want to replace the SSD in an HP mini 1010nr. i have 30gb Hitatchi 1.8" drive. does not work.
the drive connects using the cable from the SSD, however; the BIOS does not detect the drive and the drive does not power. Did i waste my time and money buying a hard drive to repalce the SSD?
Hi,
Have you watched this ?
http://www.youtube.com/watch?v=HWadcb6yDv8
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Hi everyone,,i bought a used iphone 5 with iOs 7.0.3. i want to delete the icloud account and add mine. I have sent an e-mail to the current account being used in my iphone. How can i get rid of this account plzzz help me ou
no i called the store owner from whom i bought it. he was like i will check in records and if there is something i will let u know...he was like send an e-mail its better so if it was stolen so the shopkeeper wouldnt let me to e-mail to the owner
-
I have a MacBook Air using Maverick. I have files in the trash I want to recover to their original files. I do not have "Back Up" and "Command + Delete" does not work.
Drag them out of the Trash and put them in their original location. Put Back may work on one file at a time.
-
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the imagesWhat would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback -
I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?
Please also see Boot Camp: Set the default operating system.
-
I have a license of the PARTY 11, recently expired, to find out what was going on I have PSE 11 uninstalled. Reinstall does not work because the license has expired. Can I purchase the upgrade version of PSE 12 now or should I buy a full program?
Ok thank you, I better can wait then.
Greetings, Evert Annen
Op 8 sep. 2014 19:45 schreef "Peru Bob" <[email protected]>:
I have a license of the PSE 11, recently expired, to find out what
was going on I have PSE 11 uninstalled. Reinstall does not work because the
license has expired. Can I purchase the upgrade version of PSE 12 now or
should I buy a full program? created by Peru Bob
<https://forums.adobe.com/people/Peru+Bob> in Photoshop Elements - View
the full discussion <https://forums.adobe.com/message/6711348#6711348> -
For the past 2 weeks I have not been able to open any small video on facebook or on the yahoo page . I have installed Adobe and it still dies not work. Help.
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs -
Tecra 9000: After SP2 installation the Yamaha sound driver does not work
Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
HugoHi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck -
I recently downloaded a new update of the operating system on my 3GS It seems to be a bit slower since and I have no idea if that is part of what is going wrong. I cannot get itunes to recognise my phone. Windows pops up a 'window' that says my 'mobile device services' is not working and would I like Windows to look online for the problem - I say yes, windows does it's thing, blanks out and I am back where I was. I tried updating itunes but no luck.
I found the mobiledeviceservices.exe file and made sure it was all 'on' and 'enabled' still no luck I did a search and came up with some other people who had the same problem but the answers that they were given didn't help me.When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
System recovery on Sattelite M70-204 PSM71E. The CD/DVD drive does not work
Hello!
Can you please give me some help and advice on the way to resolve the following issues:
I have had over the last three months minor problems with Windows Installer: software updates could not always be performed successfully, an error message was issued by Windows Installer regarding Quick Time when I started the computer. Apart from it, the computer was runing correctly. I had plan to restore the system with the Toshiba CD in the coming weeks to correct the issues.
But since yesterday, I have had a new problem. The CD drive is not recognized anymore under Windows XP.
I have tried to repair the driver from the CD drive following the procedure described by Toshiba. It did not work. I do not know if it is an hardware or a software problem which prevent me to recognize and use the CD and DVD drive under Windows XP and I do not know either if I can still run anymore a Restore process.
_*1/If I launch a Restore process, I believe that, at the start ,the HD will be formatted. How can I be sure that my computer will be able to read the data from the Toshiba Restore CD?*_ ( I have today a computer which still works almost properly. I would not like to be stuck with a completely dead computer, if the Restore process fails due to the CD driver)
_*2/ Is it possible to restore without using the internal CD drive? (use of an external CD drive or external HD)*_
Thank you in advance for your help and advice!Please ignore my request!
I have been able to fix the problem by correcting the Register. The CD/DVD drive works now properly. -
I want to upgrade my PowerMc G5 from 10.3.9 to 10.4, but my DVD reader no longer works-- so I cannot use an upgrade DVD to do this. Is there a site where I can download and upgrade to OS X 10.4?
$33 option...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html -
I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You may have to do this on this computer as well. http://support.apple.com/kb/ts5376 -
Where are LETOOLS for USB? The "ADB" Driver does not work with Windows XP
I just give up with Lenovo's arcane maze of endlessly-looping driver searches. I managed somehow to get something called an "ADB Driver" which was supposed to allow Windows XP to recognize my tablet as a K1 Ideapad. I downloaded the 8+mb file which installed fk knows where and plugged in my K1 tablet. Windows recognized that it had a USB device, and when prompted to hunt for the driver (which of course I couldn't find, since Lenovo sent it into the ether) I had to back out and then hunt through my entire Windows directory for an inf file containing the word "Android".
For the unsuspecting, it hides in something called -- get ready for it -- OEM16.
I guess the L, N and V keys were missing on the keyboard of the moron who labeled this pos driver. Oh good programming Lenovo NOT but since a chimpanzee programmed Lenovo's driver site I suppose it's of a piece that a baboon packaged this worthless driver. This isn't an eCommerce site it's a zoo.
I guess it was too difficult for Lenovo to include a CD with their Windows USB driver family on it. I mean . . . that would have cost them $.0000002. Jesus wept.
All I want to do is have XP know that the "USB Human Interaction" device I have plugged in is my K1 Lenovo tablet. Don't send me to Google for a USB/Windows Android driver, they direct everyone to the site of the manufacturer of the tablet. And don't insult my intelligence by even countenancing the possibility that Google's arch rival would stoop to offer any means for their OS to talk to (cough hack) Android.
I get that it has to be a Lenovo driver and/or program. So where the f is it? because this is massively pissing me off. And one other thing: No link to Lenovo. I don't appreciate being manipulated by Lenovo's flash crap only to land on a driver download site that says "We can't find it."
No. Direct me please to any non-lenovo download portal that has the most recent version of LETOOLS and hope I don't have to come back here with yet more frustration. This is the most needlessly idiotic driver service I have ever had the misfortune of being tethered to and I hope never to have to engage with it ever again. May I please know where LETOOLS can be downloaded? Thank you.
Product = K1 IDEAPAD / Born = September 16, 2011 / Sex = Android 3.1 / Skill with Android = None / Skill with Wi-Fi = NoneHi know-vo,
I'm sorry that you couldn't find LETools. I've cheked with internal team and was told that actually we do have the software, but it's called "Synchronization Software". Did you try that?
If you browse to ADB Driver page by clicking "Learn More" in support site, there is a note indicating that this ADB driver works with Synchronization Software.
Sorry for all the inconvenience caused and. I hope this info above helps.
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Alot of people use my computer and I would like to make it to where you are required to have a password to delete the history. I tried public fox but you can simply delete the history by accessing "Show all history". So public fox doesn't work.
Sorry, Firefox doesn't have a password feature for browsing history, and I haven't seen an extension for that.
Maybe you are looking for
-
Creation of accruals for PO during GR
Hi! We have configured the system to implementshipment costing and the freight costs are posted during goods receipt of the POs. What we have done is 1. Create three condition types for the different freight costs and custom duties, e.g. ZD03, ZD04,
-
I can actually hold a key and it will take me to the logins and when I login I have to hold the key the whole time I'm on it or else it restarts. What do I do to fix this problem? Please help
-
Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computer iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this
-
Trying to watching stuff online on it...not working
i'm trying to watch some sites but when i try to watch something, all i see is some little blue lego piece with question marks, how can i fix it??
-
Balancing field "profit center" line item 001 not filled
Dear Gurus, I am trying to post an vendor invoice in fb60 , but i am getting the above error message. The g/l account involved in the transaction is related to purchase price variance. Can somebody help me what could be the problem. Cheers Balaji