I want to report an error

tôi ko giỏi tiếng anh lên ko thể báo lỗi cho các bạn được tôi phát hiện ra 1 lỗi nghiêm trọng của apple trong hệ thống thanh toán
i am  vietnam
I'm not good at English up to the error can not be my friend found one serious error of apple in the payment system

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

  • 5.0 won't work - extensions message is "localized string not found".  When I force it to try to load a new window it shows a gray screen with the bookmarks on top then immediately closes and wants to report the error. Has been this way since 5.0 came out.

    I first tried downloading Safari when the 5.0 update came out last year.  When I choose the app in the dock, I get the blue top bar (Safari, File, etc) but nothing else loads.  I uninstalled the app and tried again several times, but no success. For over a year now I've used Firefox as a result.  Today I thought I'd try again, but same results.  When I choose "new window" in the file menu, I get a small gray window with my bookmarks on top, then in a few seconds, the app quits unexpectedly and the report an error screen appears.  I've unchecked all the languages in the information area for the app, cleared all history, cookies, and cache.  Still the extensions tab in the preferences area has "LOCALIZED STRING NOT FOUND" in 4 places.  It won't show what that means when I click the "?".  Will I ever be able to use Safari again?

    Perform the suggestions mentioned in the following articles:
    * [[Firefox is already running but is not responding]]
    -> Profile in use
    * [http://kb.mozillazine.org/Profile_in_use]
    Check and tell if its working.

  • When I try to open iTunes, it asks me if I want to report my error..?

    I dont understand. I erased iTunes and Quicktime from my copmputer and then added it again..that didn't work. Then, I re-installed my CD that came with my iPod..and THAT didn't work. And then today, I opened my control panel and I opened my Quicktime folder, I un-checked my Safe Mode button and then I clicked APPLY, and then i tried to open iTunes again..and it STILL didnt' work. And then when I went back to un-check the Safe Mode button, it was checked [it had a check mark in the box]. It's like it changed back all by itself. What's going on here? Is it my computer or my iPod that is messed up. My computer acknolegdes my iPod..just iTunes doesn't.
    PLEASE!!!! Someone help me. It's driving me crazy that I can't use my iPod!!!!
    Thank you for reading.

    can you check something for me please, C-D?
    try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)

  • I want to report a word error in the portuguese thunderbird. How do i do it?

    There's a word error on a question in the portuguese language of the mozilla thunderbird. I just want to report it and i don't know to who. When i try to eliminate a contact, a question will pop asking if i am sure that i want do delete it, and there's a word error on that question. No big deal but i thought you would like to correct that. Thank you.

    I think the formal procedure would be to file a bug to [https://bugzilla.mozilla.org/ Bugzilla], using key words like 'Thunderbird', 'Portuguese' and 'localization'. Additional information is given here:
    https://wiki.mozilla.org/L10n:Contribute

  • TS1424 i want to report an in app purchase error

    i want to report an in-app purchase error
    please help
    where do i go
    itunes is so so so very confusing and so so so not user friendly

    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I want standard report to get material MATNR for Which PO isn't created

    hi
    i want standard report to get material no for which Purchase Order is not created.
    only those Material no for Which PO is not generated.
    thanks.

    Hi,
    go to me23n transaction and in the top extreme left click the
    Purchase order  tab it will show you a drop down list where you will have a option called other purch. order click this and enter the purchase order for which you want to know the exsistence of that purchase order.
    if Purchase order is present it will show the order otherwise it will through you an error message.
    hope this helps.

  • I have these three tables data and i want this report as given below

    here cpv means cash payment voucher<pre>i have voucher header tableVoucher Voucher Voucher Entry ID Type Date Date1 CPV 2014-12-10 16:47:00 0 2014-12-10 00:00:00
    1 CRV 2014-12-10 16:22:00 0 2014-12-10 00:00:00
    1 JV 2014-12-10 16:49:00 ccc 0 2014-12-10 00:00:00
    2 CPV 2014-12-10 16:51:00 sss 0 2014-12-10 00:00:00
    2 CRV 2014-12-10 16:59:00 0 2014-12-10 00:00:00
    2 JV 2014-12-20 14:31:00 0 2014-12-20 00:00:00
    3 CPV 2014-12-20 14:33:00 0 2014-12-20 00:00:00
    3 CRV 2014-12-13 15:02:00 0 2014-12-13 00:00:00
    3 JV 2014-12-13 15:02:00 0 2014-12-20 00:00:00
    4 CPV 2014-12-20 14:33:00 0 2014-12-20 00:00:00
    4 CRV 2014-12-13 15:13:00 0 2014-12-13 00:00:00
    4 JV 2014-12-23 00:21:00 0 2014-12-23 00:00:00
    5 CPV 2014-12-20 20:50:00 0 2014-12-20 00:00:00
    5 CRV 2014-12-14 23:39:00 0 2014-12-14 00:00:00
    5 JV 2014-12-23 00:24:00 0 2014-12-23 00:00:00
    6 CPV 2014-12-20 22:43:00 0 2014-12-20 00:00:00
    6 CRV 2014-12-14 23:40:00 0 2014-12-14 00:00:00 select VoucherID,VoucherType,Remarks ,Debit,Credit from voucherbody
    1 CRV fsdd 0.000000000 44.000000000
    1 JV xccc 4.000000000 4.000000000
    2 CRV sdf 0.000000000 40.000000000
    2 CPV ss 33.000000000 0.000000000
    1 CPV cxvx 43.000000000 0.000000000
    3 CRV 0.000000000 33.000000000
    4 CRV 0.000000000 200.000000000
    5 CRV 0.000000000 3444.000000000
    6 CRV 0.000000000 343333.000000000
    2 JV 300.000000000 300.000000000
    3 CPV 40000.000000000 0.000000000
    7 CRV 0.000000000 34.000000000
    8 CRV 0.000000000 4000.000000000
    9 CRV ss 0.000000000 3444.000000000
    4 CPV 345.000000000 0.000000000
    5 CPV 230.000000000 0.000000000
    3 JV 4000.000000000 4000.000000000
    6 CPV 2.000000000 0.000000000
    7 CPV 3432.000000000 0.000000000
    8 CPV 222.000000000 0.000000000
    9 CPV 2000.000000000 0.000000000
    10 CPV 233.000000000 0.000000000
    11 CPV 3444.000000000 0.000000000
    10 CRV 0.000000000 45555.000000000
    12 CPV 333.000000000 0.000000000
    13 CPV 344.000000000 0.000000000
    14 CPV 4555.000000000 0.000000000
    15 CPV 455.000000000 0.000000000
    16 CPV 2222.000000000 0.000000000
    17 CPV 333.000000000 0.000000000
    18 CPV ss 232.000000000 0.000000000
    19 CPV 222.000000000 0.000000000
    11 CRV 0.000000000 2222.000000000
    4 JV xx 200.000000000 200.000000000
    12 CRV 0.000000000 333.000000000
    20 CPV 3333.000000000 0.000000000
    13 CRV 0.000000000 3333.000000000
    14 CRV 0.000000000 4444.000000000
    5 JV 33.000000000 33.000000000
    21 CPV ssss 2222.000000000 0.000000000
    22 CPV wsss 2222.000000000 0.000000000
    23 CPV 22222.000000000 0.000000000
    24 CPV qqq 1111.000000000 0.000000000
    25 CPV 222.000000000 0.000000000
    26 CPV 2222.000000000 0.000000000
    15 CRV qqqq 0.000000000 11111.000000000
    16 CRV 0.000000000 2000.000000000
    27 CPV 10000.000000000 0.000000000
    28 CPV 23.000000000 0.000000000select AccountNo,AccountTitle,AccountType,OpeningDebit,OpeningCredit from AccountChart100001 Majid ASSET 2000.000000000 3000.000000000
    100002 Salman ASSET 2999.000000000 1000.000000000
    100003 Kamran ASSET 4000.000000000 4500.000000000
    100004 Arif ASSET 3000.000000000 2000.000000000
    100005 Aslam ASSET 2000.000000000 50000.000000000
    100006 Akram ASSET 30.000000000 454.000000000
    100007 Sohail ASSET 3.000000000 353.000000000
    100008 Kashif ASSET 78897.000000000 7879.000000000
    100009 Asif ASSET 4200.000000000 3242.000000000
    100010 Tajmul ASSET 1111123.000000000 3000.000000000
    100011 Kamran ASSET 3.000000000 113.000000000
    100012 Taswer ASSET 2000.000000000 1000.000000000
    100013 dfd ASSET 2000.000000000 1000.000000000
    100014 Tameer ASSET 3000.000000000 2000.000000000
    100015 No Name ASSET 5000.000000000 1999.000000000
    100016 Saleem ASSET 3339.000000000 9999.000000000
    100017 Awais ASSET 6000.000000000 4000.000000000
    100018 Abid ASSET 4000.000000000 1000.000000000
    200001 Muazam LIABILITY 500.000000000 0.000000000i want this report as given below from above tables account no AccountTitle accounttype Debit Credit1 CRV fsdd 0.000000000 44.0000000001 cash fsdd 44.000000000 0.000000000</pre>

    SELECT AC.AccountNo
    ,AC.AccountTitle
    ,AC.AccountType
    ,VB.Debit
    ,VB.Credit
    FROM voucherheader VH
    INNER JOIN voucherbody VB ON VH.VoucherID = VB.VoucherID
    INNER JOIN AccountChart AC ON AC.AccountNo = VH.AccountNohere voucher header has voucherID and not Accountnoit is showing error at vh.accountno

  • Epson 1670 Perfection Photo Scanner gives "Scanner reported an error" in Image Capture

    I can not get my scanner to work.  It gives a generic "Scanner reported an error.  An error occurred during scanning" message anytime I try to scan something.   I have tried downloading the drivers from Epson and get the same result.  I am using a 2011 MacBook Pro 15" with Snow Leopard 10.6.7.  Any help would be appreciated.

    For anyone else with this problem (for those who WANT to use Image Capture from Preview)
    The EPSON ICA drive needs to be deleted.
    The ICA driver can be removed by following steps:
    1. Disconnect the scanner
    2. Open following path in Finder
    /Library/Image Capture/Devices/from there (called Epson Scanner.app)
    3. Delete this file.
    4. Plug in your scanner.
    5. Try to scan an image. (after this step it worked for me)
    Others have had to:
    3. Delete this file
    4. Reinstall the old ICA driver for the Epson scanner.
    5. Plug in your scanner.
    6. Try to scan an image.
    And still others have had to:
    3. Delete this file
    4. Reinstall the new ICA driver (listed above) for the Epson scanner.
    5. Plug in your scanner.
    6. Try to scan an image.
    Sorry all. It has been a long day of troubleshooting and trying different things out.
    Good luck. Drop me a line if you want to compare notes.
    -jojo

  • Encore reports an error

    hei!
    i made a DVD with a menu and when i previewed it, everything was fine
    than i wanted to build the DVD, encore didn't report of any problems in settings
    bulding started and after a while the process stopped, encore reported an unknown error and stoped to make a dvd
    and when i wanted afterwards to preview the same project, it again reports an error
    could somebody explain this???
    many thanks un advance
    asnate

    First thing to do is to tell Encore to create an ISO file on your hard drive, then use the free http://www.imgburn.com/ to burn the image to disc
    If that works, it means that you have software installed that has "taken over" communication with the DVD drive, and Encore will never work
    I don't have that problem, so I really don't remember what software does that... but I do know the work around is in my first line

  • Send email when report has error status

    Hi Gurus,
    Is there any possible way through which i can send an email only when we come across an error report in B2B 10g.
    Note: Error report means when the status of the report shows error at the console.
    Any suggestions will be appreciated.
    Regards
    Ayush

    Hi Ayush,
    If I got it right then you want to send Email notification in case an error occurs in Oracle B2B. You can definitely do it.
    Monitor the error queue (by default IP_IN_Queue) and dequeue messages for B2BERRORUSER. using a BPEL/java utility. Using same utilities you may send Email notification.
    Please let us know if you are lokking for something else.
    Regards,
    Anuj

  • The Windows Cryptographic Service Provider reported an error Error code 3221225594

    Hi
    When I want to digital sign an inteligent pdf I received this error: The Windows Cryptographic Service Provider reported an error Error code 3221225594 and I couldn't sign. I use adobe 10.1.1 and my operating system is windows server 2008. Please help me to solve the problem...thank you

    Exactly what error do you get?
    Remember this is a CM07 Report and NOT a CM07 query.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Error: The Windows Cryptographic Service Provider reported an error Error code 3221225594

    Hi
    When I want to digital sign an inteligent pdf I received this error: The Windows Cryptographic Service Provider reported an error Error code 3221225594 and I couldn't sign. I use adobe 10.1.1 and my operating system is windows server 2008. Please help me to solve the problem...thank you

    check the patchdownloader.log file - it can be a permission issue on the folder where you store the updates.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Reporting Services Error after Interactive sorting and drill down in pps

    Hi 
    i have a report  that has a drill down option that shows all workgroups within a specific  parent group and an interactive sorting ass well on both columns  parent group &  workgroup 
    This is displayed  in pps combined with a SharePoint
    ---the problem is that after sorting the parent group column by name   i then press the drill through icon  (+) next to it hopping to see all workgroups related to each parent group
      - but instead 
    i receive this Reporting Services Error  :
    The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
    Online Help       
    If I don't press the sorting and just drill through it works fine. the sorting itself also works fine. 
    any suggestions ?
     

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • EPSON Workforce 310 "scanner reported an error" when using document feeder

    I'm having trouble using my EPSON Workforce 310 printer/scanner with my new MacBook Pro (late 2012, 2.5 GHz i5, OS X Mountain Lion 10.8.2).
    Using the flatbed I can scan without a problem. But when I try to use the document feeder, I get the following error right after I click Scan and before the scanner has done anything (at least I don't hear anything moving inside the EPSON):
         Scanner reported an error
         An error occured during scanning
    The EPSON's display doesn't show any error or special message.
    This is repeated whether I use Image Capture, Preview's Import from Scanner, or the printer's native app (PrinterProxy, the one that shows up in the doc whenever the printer is printing or scanning).
    I have no problem doing the scanning from my old iMac (2006, 2GHz Core Duo, Snow Leopard). After scanning to the MacBook fails I can walk over to the iMac and scan from there without problem and without resetting anything on the EPSON.
    The EPSON is connected the home network via ethernet to a Time Capsule. Both computers are connected to the network via WiFi.

    Syd,
    My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do.

  • Want BW Report within Portal in Editable mode

    HI Gurus,
                  I hav created Bex Appln iView from Query string obtained from "Query Designer". Now I am able to view Selection screen. When I enter some values and execute Report gets generated. But this report is in Display mode.
                  My BW functional consultant want this report in Editable mode to update some fields. They are saying they are able to edit If they go to Bex analyzer (Execel Format).
                 Please suggest me probable solution. or what I am missing ?

    Values in a BW report cannot be changed.
    However a report from integrated planner can be.
    I expect your are on BI 7.0 with IP.
    You need to create a planning cube and additional Planning Levels.
    It is a rather different setup but you can read about it here.
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
    Best Regards
    - Rasmus
    Please reward points if helpfull.

Maybe you are looking for