I want to reset WRT 300N router
My WRT 300N will no let me access to change the password. I want to Press the reset Button. How will i set up access to it again and put a password that I can remember into it.
Not much of anything . Here is what I did. I held reset for about 45 seconds and nothing happened. I did find out the router IP address it is 192.168.1.47 when I type that in it ask me for the log in and password. I try admin admin then nothing and admin and admin and nothing but it does not work. I am stuck again. I did yesterday get to CISCO/linksys help and after a while they said that it was out o warranty in Jan of this year....
Similar Messages
-
How can I connect an external antenna to my wrt 300N?
They should just unscrew ... but the middle on (the square one) is the external and the other 2 are the detachable. I wouldn't mess with that though.
-
Problem with Wireless settings in WRT 300N (V2)
Greetings,
I've just managed to reset the WRT 300N to default settings and have setup the internet conncection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wirelessly to the network.
The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.
I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
It's something that I think muxt be to do with the security settings.
Can anyone offer any suggestions ??
THanks
Solved!
Go to Solution.Try the following steps:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Then Click on wireless Tab select, Wireless Network mode “Mixed”, Radio Band to 20 MHz only and Standard Channel to 1, 3, 6, 9, and 11. Click Save Settings.
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 75
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2307
Then check the status..
Here is the link for connecting the wireless network: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32036bdcd9dd44ec94f94fc5f6da666f_Connecting_wirele... -
In trying to get into the Linksys WRT-120N router's management utility browser, I was unable to sign in. After resetting the router multiple times and exhausted all the variants of the username/password combination that I can find and think of, I was still unable to sign in to the utility browser. Just for the sake of trying something different, I opened IE 8 browser and was able to sign in just fine. This tells me that FF has a problem with authentication, somewhere along the request information aren't being sent correctly to allow signing in to the utility page of the router.
hi , here is a step by step for for you need to do..
a:- Do not use the setup disc....remove it and keep is somewhere safe.
b:- Disconnect the USB cable from the modem and PC and keep it somewhere safe as well
c:-turn off the modem and PC....
d:- with the power plugged in....reset the linksys router for 1 minute...once done , unplug the power.
e:- connect the modem to the "internet" port of the router and connect the PC to one of the other ports..
f:- turn on the modem only.....wait for 1 minute for the modem to initialize
g:- turn on the router and PC.
h:- on the PC...hit "start">>"run">>cmd and enter ....now the black window should stay up......type ipconfig and enter.....the IP u get should be 192.1638.1.100....if so...
i:- bring up your web browser and key in http://192.168.1.1 and hit go.....type the password as "admin" when prompted...
j:- under the setup page....look for an find MAC address clone.....enable and "clone"......save settings and check if you are going online. -
I want to connect a Belkin router to my TC
I want to connect a Belkin router to my TC via cable to extend my network to my garage. Can anyone tell me how to go about it, if it is possible to do?
966?? That is not its full model number and revision. I cannot find any listing for 966.
Belkin numbers are like..
F5D or F7D something.. usually 4 numbers..
http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Belkin
See typical models which are semi useful because you can flash them to dd-wrt.
Looking at this airport express on eBay: Apple Airport Express A1264 54 Mbps Wireless N Router (MB321LL/A)
That is the least useful model.. it has one ethernet port.. so there is no way of using it with ethernet in the garage and the wireless is weak single band.
Here is what I would buy.
http://www.ebay.com/itm/Apple-AirPort-Extreme-Base-Station-Wireless-N-Dual-Band- Router-A1354-MC340LL-/151305316747?pt=COMP_EN_Routers&hash=item233a7fe98b
http://www.ebay.com/itm/Apple-Airport-Extreme-Base-Station-4th-Gen-A1354-Dual-Ba nd-802-1A-B-G-N-ROUTER-/301181716065?pt=COMP_EN_Routers&hash=item461fd44661
Even the next one.. if it is not too expensive is a fair bit better.
A1408. -
Hello, I have been experiencing decreased connection strength through my WPC300N wireless notebook adapter using a WRT 300N wireless router. At boot-up, the signal strength will be low, with 100+Mbps as the speed. After a few minutes it drops to 54 Mbps, then 13 or 11 Mbps, then finally 2 and 1 Mbps, signal strength very low. The internet is as slow as molasses at this point. I am using windows XP with all service packs. I live in a two story house, with the router on the second floor. However, our old Wireless G router (can't remember the model, it didn't have any speed or range boost though) would get to the laptop where its at now. I thought a WRT300N would be better, but I am having this problem now. My laptop with a Wireless G card holds up at 54 Mpbs all the time. Any ideas or suggestions? Thanks a bunch in advance.
No, the changes did not make a difference. Sorry for the long delay in response. The signal is still dropping off very badly. I am still having no problems connecting the WRT 300N off my really old laptop that is using an old Linksys Wireless G card. In fact, the other day I was downloading two programs at 100Kbps EACH!
BUT, the laptop using the Wireless N card is still slowing to a snails pace within 10 minutes of connecting to the Router. I dont know what else to do, I am thinking of trying different locations for the router to see if I can get a more stable connection. The 14 day return period has long since passed, so I have to find a way to make this work. But as of now, I am still having problems. -
After all I received 4 linksys wireless router n series.
2 WRT 300n
2 WRT 600n
I decide to test those routers in LAB and then migrate our buisiness medium platform from G to N.
Lets See what happened.
1- In open office env with 200 square meter I have weak signal at corner that reduce my bandwidth to 54 Mb/s(from 270 Mb/s).I test coverage area against WRT 54g and I get Incredible result.there is no more coverage except that you forget bandwidth because it Reduce it to 11 Mb/s.
2- I used Solarwinds Orion to get Throughput from this router and again I find a new incredible thing my dashboard show 150 Mb/s at 2 meters distance between my computer and router.
3- I decide to use site survey to plot a map of coverage area incredibly in close building area i see a circle with 10 meter in blue witch means I can use 270 Mb/s at this range only.
4- After All I tried to bridge two routers together I impact with a phenomena these routers series cant bridge together and there is no sign of option access point or bridge in web base console.But I read in Linksys catalog that this models are enhanced Access Points.
5- After all problems with signaling,bandwidth,Bridging ...
I can only say that linksys produce a product with many weakness in hardware and software.There is always a reality check between what marketing materials claim (a perfect test in their lab) and a real-world test. Having been on the vendor side for many years, I have seen this situation many of times.
Hopefully the speeds will be good enough for your deployment situation. What caught my eye was your mention of Solarwinds. I have been a long time user of Orion and the Engineering Toolset. Recently I came across PacketTrap Networks (www.packettrap.com) for scanning and diagnostic tools. They also have a monitoring dashboard that I have been using for my critical devices. It was the easiest dashboard to set up that I have experienced. To top it off, they have a free version - gotta love that price. www.packettrap.com/download. Good luck, I feel your pain.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 02-25-2008 10:49 AM -
Wanting to reset my wireless network
I was wondering what the easiest way to go about this. I have the wrt54G ver 6 router, and im going to try to reset it, before i go out and buy something different. Anyway, any helpful, steps, links whatever, to help me reset this and to make sure everything is configured right, please let me know. thanks
with wrt54g v6 router the reset button is on the back side.
If you press the reset button the router will go back to factory defaults.
if u want to reconfigure the router > it depends on your isp
whos ur isp -
I have an IPhone 4, and I wanted to reset it, but couldn't do it via computer because the "find my IPhone" was turned on. So I went to ICloud > Find My IPhone and just erased my phone from there. The was acting weird but I finally got to a black screen with the spinning circle. And it won't advance. I can't just hold the sleep button and home button down because my sleep button is broken! Any help? I have reset my phone before.
Hello cwypyski,
The link below provides information on and can also assist with setting up service for your iPhone to have your Sleep/Wake button repaired.
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&product=iphone
All my best,
Allen -
I have uninstalled and reinstalled Firefox because I was receiving unwanted adware and was being directed to untrusted sites. Now I want to reset Firefox because I want to change the home page and toolbars, and something is preventing the reset. I have closed all open windows repeatedly, but the problem continues.
=====Moved from Firefox OS product to Firefox for Desktop product category by Moderator. -feer56=====Check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder
'''Linux:'''
* [http://www.freesoftwaremagazine.com/articles/see_all_your_installed_applications_ubuntu_unity Ubuntu Unity]''' {web link}
* Xfce: Applications Menu category sections
* options depends on the package manager and the desktop environment
Go thru the list. If you find something that you don't
know what it is, use a web search.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''''' {web link} -
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?
1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact -
A friend gave me a 17" MacBook Pro used for only one project. (Lucky me) I want to reset/register the laptop as new and need to know how to do that.
THEN...
I need to migrate data from my older Macbook Pro to the newer one. I don't want to migrate all of the data. I have been moving data from one computer to another for 15 years and want to move only what is current and what I now need (Good-bye Quark files)--can I do that? How? Also, the older laptop is running Lion. The "new" one is running Leopard. Is that an issue? Do I need to upgrade the newer laptop to Lion first?
Thanks.Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Unfortunately, Setup Assistant or Migration Assistant are set up to migrate your entire Home folder, third-party applcations and support files, and system preferences. If you use the Setup Assistant that opens the first time you boot Lion after installing, then you should migrate your Home folder, etc. This is the easiest way to do it.
Once migration is finished you can delete what you don't want. -
i wanted to reset my iphone 4 from the phone settings and everything started okay until i realised it was not working at all now my phone is tuck with the apple logo and won't start can not connect to the itunes store as well what to do please help
Place your iPhone into recovery mode as described here. You may have to try to enter recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808 -
I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set.... -
I purchased a second hand iPhone 5. I don't have the apple ID of that iPhone which used for activation of this iPhone. I want to reset all the content and setting of this iPhone. Should I ?
Because that iPhone has the activation lock on you need to contact the former owner of that device and ask them to remove the lock. The can do this in a number of ways. First would be to manually enter their information on the device and allow you to complete the set up under your apple ID. The second method would be to have them sign into icloud.com. Once they are on that site, they can click the Find My IPhone and remove that device from their iCloud.
Maybe you are looking for
-
Problem with Localization of Crystal Reports
Post Author: raj20007 CA Forum: Crystal Reports Hi everyone..I am having a problem with crystal Reports. I need Malayalam unicode( INDIAN Language) to be displayed in the reports, this data will be binded from database.And the problem is : After appl
-
Please help with this registration code issue!
Hi, I just purchased Quicktime Pro, and am trying to use it. For some reason when I am working with a video, my registration code is always showing in the window under the video. Why is this, and how can I remove it so that it doesn't constantly show
-
I have been a longtime user of Firefox and Adobe Acrobat (NOT the reader). A few months ago I installed Nuance PDF Converter, and stipulated that Acrobat should be the default when opening PDFs. However, when the PDF is opened under Firefox, Nuance i
-
I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?
-
We have animated buttons on a scene select page with footage being played from the feature timeline. However when the project is rendered, the program is introducing a white line below each place holder. We have been able to fudge it by making a boar