I want to restore my new macbook pro to factory settings

I just bought a new 13 inch Macbook pro mid 2012 it shipped with Lion so I updated to Mountain Lion but like two weeks later it started to run slow, I want to restore my Mac to factory settings. I have been searching how to do it but everyone say that i need a cd but I dont have any cd.

turn your computer on while holding down the command + r keys - release the keys once you see the apple logo and once you get to the disk utility menu - erase your macbook and reinstall your OS - i think because you upgraded to Mountain Lion - your recovery partition will also be Mountain Lion - try doing a clean install of ML and see if the issues you're having are gone when you do a clean install.
if you're still not happy with the way Mountain Lion performs in your macbook, then you have to do a Internet Recovery to get Lion reinstalled.
good luck

Similar Messages

How do I restore my new MacBook Pro to factory settings?

I got a MacBook Pro back in September and did migration assistant to transfer all of my programs, etc. over. It took an entire day. Anyway, I'm having issues with some programs so I would like to reset my computer to it's factory settings then actually install all of the programs from the original disks. There were no CD/DVD's that came with it so I'm not sure how to go about doing this. Any help would be greatly appreciated.
Thanks
Scott

Restart with the Option key held down, tab to Lion's recovery drive, press Enter, and use it to erase the drive. Install the OS.
(62322)

How can I restore my new Macbook pro to Factory setting?

How can I restore my new Macbook pro to Factory setting?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: Be sure you have an active internet connection.

How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

Boot your computer while pressing Command-R. You can reinstall Lion from here. Covered here:
http://support.apple.com/kb/HT4718

I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.

I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.
Also, I had to install the software twice on my same computer before because I had to reboot the computer. I don't know if this affects the limit.

You are allowed to have two activated installations so there should not be a problem having working installations on the two machines. If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I want to buy a new macbook pro 2012, can i sell my old macbook and put some more money to buy the new one???

I want to buy a new macbook pro 2012 with retina display, can i sell my old macbook and add some more money to buy the new one???
Is there any deal like this?

Apple has a rebuy and recycle program, but you won't get much for your old MBP from that program. Your best bet is to just sell it yourself (I used eBay) and use the money you get to buy your new computer.
Good luck,
Clinton

I want to buy a new Macbook pro 15 2.3Ghz which is currently on OS mountain lion. Can I upgrade it to OS Maverciks when it is released?

I want to buy a new Macbook pro 15 2.3Ghz which is currently on OS mountain lion. Can I upgrade it to OS Maverciks when it is released?

I realized I still had this as an open question, so I thought I would follow up. By calling around, I was able to locate a Macbook Pro that still had ILife 09, so I bought that.
But then I found out I could actually continue on with Ilife 08, but just wiping the new computer and reinstalling the first disc (system) but not the second one (ilife). So then when I used a Time Machine backup from my old computer to migrate to the new one, it simply continued on with O8. This made me even happier as I really was trying to avoid Faces in iPhoto 09.
Thank you for the input (I did read it back when you posted it; I just did not realize I needed to "close" the question.)

I want to buy a new Macbook pro 15", but I don't like Lion, I want Leopard installed, is there any issues with drivers or any other I should be aware of?

I want to buy a new Macbook pro 15", but I don't like Lion, I want Leopard installed, is there any issues with drivers or any other I should be aware of?

Hello, I've tried Lion from the day they released to last week I got my computer formated and with leopard again, on my iMac 24" from early 2009 2.9 Ghz core 2 duo, and I have installed 8 Gb of memory, and i have some complains about it, there are some cosmetic issues but mostly I'm concerned about issues bellow the hood, as I'm a stock trader and I depend completly from my computer's performance, let me explain:
Superficial issues:
1. They took off "spaces" and I liked it.
2. I dont use the magic mouse, I need a more accurate mouse for my charts, and it seems they built the entire OS assuming you would use the magic mouse for gestures, scroll, etc to try to mimic in some way the Ipad and Iphone functions, but what if you arent using it like me?
3. I never used that little rocket icon that makes all your apps appear and that could be one of the "improvements on Lion", at first sight it looks nice and slick, but if you try to use it and make it part of your daily use, you would find it is useless, it is a pain to try to arrange it the way you like it, so I rather use the spotlight to search for my apps, its faster.
Now the MOST important, 'performance':
1. It completly suffocate my computers hardware Leopard much more lighter, beggining from the start up that taked almost 1/3 or twice the time, and I think Lion has some bugs bellow the hood, i was doing my normal stuff, some apps running and everything, and suddenly I started to feel the computer a little slow, safari taking forever to open the pages for example, and I opened the activity monitor to see what was going on, and it was there, I was using 4 or 5 gb from my memory, and CPU making insane peaks, and Im using 2.46 gb as im writing it doing exactly the same stuff, (but Im happily using Leopard now), and it wasnt once, as i told before, I used lion since the day they released it and happened several times until it drove me nutts. But leopard not problem in that regard at all, Never.
hope this helps, and hope some apple guys read that because lion resulted in a big disappointment for me.

I want my macbook pro in factory settings, how can i do that?

I want my macbook pro in factory settings, how can i do that?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
For earlier versions of OS X:
Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

HT201262 How to restore an apple macbook pro to factory default?

How to restore an apple macbook pro to factory default?

Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

Hi, I am going to reset my Macbook Pro to factory settings but I would like to back it up first. I have backed it up to an external Hard Drive so if I were to wipe the laptop, would i be able to retrieve all of my files and applications

Hi, I am going to reset my Macbook Pro to factory settings but I would like to back it up first. I have backed it up to an external Hard Drive so if I were to wipe the laptop, would i be able to retrieve all of my files and applications. (Office Mac, Adobe CS6, Logic Pro)

When OS X asks you to restore a backup, it will allow you to select what you want to restore from the backup, Just select the things you need, because if you select everything, you will be in the same status as before restoring the Mac to factory settings. This has nothing to do with erasing the hard drive
It's OK to make backups with Time Machine

HT201364 how do I reset my macbook pro to factory settings. Am currently using OS X Mavericks

how do I reset my macbook pro to factory settings. Am currently using OS X Mavericks?

Do you mean by "reset to factory settings" re-installing the OS X version it had originally?
Phil

Time Capsule to restore to new Macbook Pro

Okay...I'm pretty sure this will work...but just wanted to make sure before I pull the trigger.
I currently backup my Macbook to Timecapsule. I'm getting a new Macbook Pro soon and wanted to make sure that I can restore my current setup to the new laptop from my Time Capsule backups.
Thanks in advance for your sage advice.

I currently backup my Macbook to Timecapsule. I'm getting a new Macbook Pro soon and wanted to make sure that I can restore my current setup to the new laptop from my Time Capsule backups.
Yes. Check out the following Apple support article: Restoring files from a Time Capsule backup, specifically the section, titled "Restoring an existing Time Capsule backup to a new Mac."

Should I "restore" a new macbook pro retina from a time machine backup of old mackbook pro?

I'm considering buying a new Macbook Pro Retina. 15".
Now I'm using a 2007 2.4 GHz Core 2 Duo MBP 15" running Lion. It works fine most of the time. Occasionally an application will freeze and I need to force quit.
It seems like the most convenient option would be to restore the new machine from the last Time Machine backup of the old. The benefit is that I'd feel confident that all of my stuff is on the new machine. The downside is that maybe glitches that had developed in the current system over the ~5 years would be transferred over to the new machine.
Or I could make a fresh start with the new machine and invest the time needed to transfer over the iPhoto, iTunes libraries and Documents folder and reinstall all the third party applications. I have an external optical drive to use the installation disks where necessary. The benefit would seem to be that any glitches that had developed in the old system might be avoided. The downside is that this would take a very long time.
What's the recommened method of migrating from an old machine to a new one?

Instead of a restore from Time Machine, I would suggest that you use Setup Assitant that comes up the first time you start the new Mac.
Connect the TM drive to the new Mac before you power it up
Then when the new Mac asks if you wish to recover from an older Mac say yes
Then select from Time Machine
This will keep everything in the system for the new hardware and bring over everything else.
Allan

Want to buy a new macbook pro...do I have to re-buy FCS?

I have a macbook with Final Cut Studio 2 installed and I want to upgrade to a macbook pro. I think I remember reading in my software booklet that my serial numbers are good for one desktop computer and one laptop. Since I have installed FCS on my imac and macbook already...will I have to re-buy it if I get a new macbook pro?

I really think the INTENT is that you can have it on a home computer and a portable computer. But I'm not an Apple lawyer.
I'd go ahead and do it and wait to be caught. If your intent is pure you have a leg to stand on... in my mind.
Same rules will apply -- if you have it running at the same time on the same network it won't work.
Good luck,
CaptM

I want to restore my new macbook pro to factory settings

Similar Messages

Maybe you are looking for