I want to run a program on my ipad that runs on my mac using the terminal

I have a prgram that I can run in terminal on my mac. I would like to be able to run it on my iPad. Is that possible?

Maybe this would help:li
There is an app in the iPad's app store called "Connect to My Mac". If that's what you'd like to do,, great!
I cannot speak to the quality of this app, and I have no firsthand knowledge of it whatsoever.

Similar Messages

If I switch my installed PS6, Illustrator and InDesign over to the Cloud, will I have to pay monthly even though I already purchased the programs? And will I then be able to use the program on another computer when I sign into my adobe account?

If I switch my installed PS6, Illustrator and InDesign over to the Cloud (from an installed program with the code, like Adobe used to do it), will I have to pay monthly even though I already purchased the programs? And will I then be able to use the program on another computer when I sign into my adobe account? I know how to switch it over, I just want to make sure I won't also have to pay monthly even though it's already been purchased.

Your purchase of licensed version of Adobe applications does apply to CC subscriptions. If you subscribe you will pay for the subscription on whatever periodic basis you choose (monthly versus annually).

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

I am planning on using the USB-8476 LIN interface as the LIN bus Master in an application. The application would require the USB-8476 (Master) to program a Node ID and Zone ID into a slave device that is on the LIN bus. The slave device is a PIC12F1822 mcu + MCP2021 LIN transceiver. After reading through the User/Software Manual for the USB-8476, it does NOT seem possible to assign an ID to a slave device. It seems like you can only communicate with slaves that already have an ID programmed into their memory. The Node/Zone ID terminology is used by our customer and may not conform exactly to the IDs associated with LIN. I am new to the LIN world, so please let me know if you need more information about what I'm trying to accomplish. Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

No need to respond to this topic. The company that builds the slave device has a communications specification that was recently provided to me. I should be able to use the NI USB-8476 and a call to the ncWrite function (NI-CAN Frame API function) to accomplish my goals.

Just set up iTunes for windows but when I try to sync my iPhone to this it says I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same library on the windows is blank

Just set up iTunes for windows but when I try to sync my iPhone to it this is what it says, I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same password on this windows pc system same log on etc..I don't have anything loaded on it. All I want is for the info that's on the power book in iTunes and my iPhone to snyc/update etc on the windows pc. How do I do this? My power book is dead to the world.

Read here.
https://discussions.apple.com/message/18565125#18565125

I want to copy songs from my old ipad to a new one. laptop used in configuring the old ipad crashed and cant be used again.

i want to copy songs from my old ipad to a new one. laptop used in configuring the old ipad crashed and cant be used again

You may be able to re download iTunes purchases for free directly on the new iPad.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Note: Previously purchased music is only available through iTunes in the Cloud in Australia, Canada, Cypress, France, Ireland, Luxembourg, Malta, Mexico, New Zealand, Spain, the United Kingdom, and the United States. Previously purchased TV shows are only available through iTunes in the Cloud in the United States.

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

I am so tired of iphoto crashing, losing work I've done. I want to switch to photoshop elements 10 but need to know if it uses the iphoto library or if I can import that library into elements

I am so tired of iphoto crashing, losing work I've done. I want to switch to photoshop elements 10 but need to know if it uses the iphoto library or if I can import that library into elements

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.

Intavieuw en instadesk account: Perfectly dowload it but I cant find where I can make an account. Whithout an account I cant loggin on both programs. Who can help me sow I can use the apps!

Intavieuw en instadesk account: Perfectly dowload it but I cant find where I can make an account. Whithout an account I cant loggin on both programs. Who can help me sow I can use the apps! Thank you.

Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

I have iWork '06 on my Mac (running OS 10.6.8). Will I be able to use the Keynote files it produces with the Keynote iPad app?

Hi,
I have iWork '06 on my Mac (running OS 10.6.8). Will I be able to use the Keynote files it produces with the Keynote iPad app?
Thanks,
Mark

You probably can open the Keynote '06 files with Keynote for iOS but not the other way around. Files created by the iOS iWork apps can only be opened by iWork '09 apps on the Mac.

I want to delete certain emails on my ipad but not on my mac. Right now when I delete a message on my ipad it moves to trash in my mac

I want to delete certain emails on my Ipad but not on my mac. Right now when I delete message on ipad it moves message on mac to trash also. Can I change this?

If this is an IMAP account, that is how it is supposed to work. The whole point of IMAP is to keep your email synchronized across multiple access devices.
Instead of trash, you could move those files to a new IMAP folder you create, something like "ignore on iPad" folder.

If I have a program that runs in windows under the command prompt and on Mac in the Terminal window, can it be run in iOS

I have a program that is ran using the command line in windows and the terminal window on Mac or LInux. Is it possible to create an app for the iPad that could run this program. This program does require admin rights.

No.

How do I use the Terminal to run the 10.6.8 update?

After my iMac crashed during the 10.6.8 update install, the Finder won't launch (tried via the Dock and "Force Quit" command). I've used a Terminal window to get to the folder (ChangeDirectory) with a downloaded copy of the 10.6.8 update but I don't know how to launch the Installer program to try to re-install the update (Software Update won't help here because the Mac is updated enough to claim to be running 10.6.8 so it doesn't think there is anything to update).
TIA.

now able to create logical drive but installation again failed, here is the console log:
6/30/11 11:41:30 PM          Installer[966]          Mac OS X Update Installation Log
6/30/11 11:41:30 PM          Installer[966]          Opened from: /Volumes/Mac OS X 10.6.8 Update/MacOSXUpd10.6.8.pkg
6/30/11 11:41:57 PM          Installer[966]          ========================================================================== ======
6/30/11 11:41:57 PM          Installer[966]          User picked Standard Install
6/30/11 11:41:57 PM          Installer[966]          Choices selected for installation:
6/30/11 11:41:57 PM          Installer[966]                    Install: "Mac OS X Update"
6/30/11 11:41:57 PM          Installer[966]                    Install: "Mac OS X Update"
6/30/11 11:41:57 PM          Installer[966]          ========================================================================== ======
6/30/11 11:41:57 PM          Installer[966]          Configuring volume "HD"
6/30/11 11:41:57 PM          Installer[966]          Free space on "HD": 63.61 GB (63612735488 bytes).
6/30/11 11:41:57 PM          Installer[966]          Create temporary directory "/var/folders/eW/eWl9WrwqGQ0hARMov5qLTk+++TI/-Tmp-//Install.9664INg9O"
6/30/11 11:41:57 PM          Installer[966]          IFPKInstallElement (1 packages)
6/30/11 11:41:57 PM          installd[984]          PackageKit: ----- Begin install -----
6/30/11 11:42:14 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:14 PM          kernel
6/30/11 11:42:14 PM          kernel
6/30/11 11:42:21 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:21 PM          kernel
6/30/11 11:42:21 PM          kernel
6/30/11 11:42:29 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:29 PM          kernel
6/30/11 11:42:29 PM          kernel
6/30/11 11:42:36 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:36 PM          kernel
6/30/11 11:42:36 PM          kernel
6/30/11 11:42:51 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:51 PM          kernel
6/30/11 11:42:51 PM          kernel
6/30/11 11:42:58 PM          kernel          disk0s2: I/O error.
6/30/11 11:42:58 PM          kernel
6/30/11 11:42:58 PM          kernel
6/30/11 11:43:06 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:06 PM          kernel
6/30/11 11:43:06 PM          kernel
6/30/11 11:43:13 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:13 PM          kernel
6/30/11 11:43:13 PM          kernel
6/30/11 11:43:27 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:27 PM          kernel
6/30/11 11:43:27 PM          kernel
6/30/11 11:43:34 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:34 PM          kernel
6/30/11 11:43:34 PM          kernel
6/30/11 11:43:42 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:42 PM          kernel
6/30/11 11:43:42 PM          kernel
6/30/11 11:43:49 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:49 PM          kernel
6/30/11 11:43:49 PM          kernel
6/30/11 11:43:58 PM          kernel          disk0s2: I/O error.
6/30/11 11:43:58 PM          kernel
6/30/11 11:43:58 PM          kernel
6/30/11 11:46:47 PM          installd[984]          Deferred path /usr/bin/mdcheckschema is not in sandbox and will be skipped.
6/30/11 11:47:16 PM          kernel          disk0s2: I/O error.
6/30/11 11:47:16 PM          kernel
6/30/11 11:47:16 PM          kernel
6/30/11 11:47:24 PM          /System/Library/PrivateFrameworks/PackageKit.framework/Resources/shove[100 3]          [source=file] failed _RelinkFile(/var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root/System/Library/Frameworks/SystemConfiguration .framework/Versions/A/_CodeSignature/CodeResources, /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/_CodeSignat ure/CodeResources): Input/output error
6/30/11 11:47:24 PM          kernel          disk0s2: I/O error.
6/30/11 11:47:24 PM          kernel
6/30/11 11:47:24 PM          com.apple.installd[984]          Input/output error
6/30/11 11:47:24 PM          kernel
6/30/11 11:47:24 PM          installd[984]          PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=120 UserInfo=0x1040d2e70 "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/output error") {
    NSLocalizedDescription = "An unexpected error occurred while moving files to the final destination.";
    NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=5 \"The operation couldn\U2019t be completed. Input/output error\"";
    arguments =     (
        "-f",
        "-s",
        "/var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root",
6/30/11 11:47:25 PM          Installer[966]          Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
6/30/11 11:47:27 PM          Installer[966]          IFDInstallController 3EFB090 state = 7
6/30/11 11:47:27 PM          Installer[966]          Displaying 'Install Failed' UI.
6/30/11 11:47:27 PM          Installer[966]          'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.
6/30/11 11:47:27 PM          Installer[966]          The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds
6/30/11 11:47:29 PM          /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[982]          MDS Error: unable to create user DBs in /var/folders/zz/zzzivhrRnAmviuee++++KE+++3Y/-Caches-//mds

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

My os x is running in an external disk, how do i go back to using the internal disk

my os x is running on my external disk and I want to reverse and use my internal disk instead. I also cant seem to push through to internet recovery if i remove my external disk and would want to reinstall os x through internet recovery. im only seeing the globe/earth revolving but loading status seems freezing. pls help plssssssss

iwantchange wrote:
my os x is running on my external disk and I want to reverse and use my internal disk instead. I also cant seem to push through to internet recovery if i remove my external disk and would want to reinstall os x through internet recovery. im only seeing the globe/earth revolving but loading status seems freezing. pls help plssssssss
If you installed OS X Mountain Lion (per your signature) to your external drive, you should be able to restart your Mac Mini while pressing/holding the Option/Alt key and selecting the Recovery HD - 10.8.5 in the startup manager. This boots you into the external drive's Recovery System (different than Internet Recovery). From the OS X Utilities Menu, you can use Disk Utility to "clone" both your external Macintosh HD and its Recovery HD to your internal drive.
First, back up your internal drive unless you don't need anything on it.
Restart your Mac Mini into the Recovery System on the external drive using the Option/Alt key and selecting the external drive's Recovery HD.
Select Disk Utility and erase your internal drive's Macintosh HD.
Stay in Disk Utility and select your Macintosh HD on your external drive.
Click the Restore tab. Your external drive's Macintosh HD should be displayed in the Source field.
Click and drag your internal drive's Macintosh HD to the Destination field. Note: This partition needs to be the same size as or greater than the Source.
Click the Restore button. This will block-copy the external drive to your internal drive.
After the restore completes, both your internal and external drive will be labeled the same (e.g. Macintosh HD).
Quit Disk Utility and at the OS X Utilities menu, click on the Apple logo (upper left corner) and select Startup Disk. Select your internal drive and Restart. This will restart your Mac Mini using your internal drive.
Good luck

I want to run a program on my ipad that runs on my mac using the terminal

Similar Messages

Maybe you are looking for