I want to run hardware test on my Power Mac G5 but it isn't working.
What I tried:
I have the original install disc 1 which came with the machine in the optical drive (which is the usual one). I printed the hardware test guide which is on the disc, disconnected everything but mouse, keyboard and monitor. I tried to boot, pressing the Alt/Option key, but the "system picker" or boot menu won't show up. What happens is what somebody described as for "old world" macs: my system boots with no finder window open and without the white screen and apple logo (which usually shows up during startup).
I also tried something I found in a user manual pdf for Power Mac G5 on the apple archives: Booting and press-holding C (btw it's strange that this manual says something different than the manual on the original disc). What happens here is that my machine is booting from the original disc but it boots in Installation mode. I looked at every drop-down-menu I could find there for several times but there is definitely no hardware test, since this is thought to install Mac OS 10.4.
I also tried the Intel-way and holding D during boot, but no surprise, it only booted the first drive (like it should on a pre-Intel).
But something about this all is very strange. Yesterday night I tried all these steps above and when I was close to fall asleep in front of my monitor it suddenly worked and I made it finally into the hardware test. If I remember correctly, I was holding down the C key, but as I said a was pretty dizzy and can be mistaken. I ran hardware test once enhanced and it stopped during ram, giving me an error code I wrote down. But since I made it into the test and was so tired, I thought "lets continue tomorrow" which was my epic fail for this year, I guess. Today I repeated every step, every way I tried but it just doesn't work; and I read sooo many forums and Q&A's.
By the way here is my error code which appeared after 49 minutes (to proof I didn't dream this):
"2MEM/1/4: DIMM3/J14"
Why do I want to do this?
Around the 1st of September this year my Power Mac G5 didn't boot anymore (the fan speeding issue). After reading a little online I came to the point that its either my Ram memory or its my graphics card or its Pram or NVram. I resetted Pram and NVram, I also replaced battery and then it booted again for one day but on the following day it didn't. I repeated every step but the battery replacement since it was a brand new one. It can only be Ram memory or my Graphics card (which is the standard one for this machine).
Since then my Power Mac was rarely in use, only two or three times in Firewire Target Mode to access some of the data. Yesterday I wanted to do this again; booting it in FT mode but I must have connected my keyboard too late during booting and my machine surprisingly booted just fine! I was so stoked about this! Then I wanted to find out why it didn't work for a while and started several steps. Ran maintanance scripts, repaired the system volume, checked for enough free space, checked my Ram and then I stumbled on the interwebs over the hardware test which is delivered on the original install disc 1 and I never heard about this before (strange enough). What followed is written above.
What do I have?
I have this:
Modellname:
Power Mac G5
Modell-Identifizierung:
PowerMac7,3
Prozessortyp:
PowerPC G5 (3.0)
Prozessorgeschwindigkeit:
2 GHz
Anzahl der CPUs:
2
L2-Cache (pro CPU):
512 KB
Speicher:
4 GB
Busgeschwindigkeit:
1 GHz
Boot-ROM-Version:
5.2.4f1
Seriennummer (System):
CK52107BRTY
Hardware-UUID:
00000000-0000-1000-8000-000D93640EEE
Sorry for the German but I think you still get it. The PPC was delivered with 10.4 and I bought it used from a friend with his original Update disc to 10.5 and I updated to the max, 10.5.8. I have 2x 1TB drive (similar ones) together as a Raid0 and three partitions on it. (I know now that it doesnt make that much of a sense).
Yeah so I really want to find out why my machine didn't work for three months but since it is so old and I'm a student, it doesn't make any sense to me to go to an Apple store or similar to have it expensively serviced since there is no guarantee that these guys really help you (heard some stories about the local stores here).
Is there a way to re-access the hardware test and run it to the end?
As you might have noticed, I'm pretty desperate. I would soooooooo appreciate it!!
Best,
Erik
"2MEM/1/4: DIMM3/J14"
Replace the memory in the DIMM 3 slot.
If you are running Mac OS X 10.5 you can use this program to test your G5's memory:
http://www.kelleycomputing.net/Rember/
It will subject your RAM to a more thorough test than Apple Hardware Test.
Similar Messages
-
Can I run hardware test and repair a disk with Leopard using 10.3 DVD
Hi,
I'm trying to decide whether to partition and clone Leopard to my external or partition and install Tiger on the external.
My iMac came with 10.3.6 install and hardware test DVD's and they (Comp USA) gave me a Tiger drop-in DVD. I upgraded to Leopard through a family pack DVD (when I told my friend I would by one of the install's I thought I would get a DVD, but you only get an install license, oh well). By the way, Leopard runs great in my rev A iMac G5.
I'm trying to figure out which os to use on the external as a safe-boot incase something happens. If I clone Leopard onto a partition for backup/boot, can I still use the Disc Repair (not permissions) and Hardware Test from the 10.3 or Tiger DVD's to maintain that permission should something bad happen? The way I see it, i'll be able to repair permissions on both the main and external drives using Leopard's disc utility, but I'm not sure if I can repair a Leopard disk or do Hardware Test on that disc using an earlier version of OSX install/Hardware Test DVD's.
Will earlier versions of OSX repair a Leopard disk and be able run Hardware Test?
Thanks for the help,
LowBb
Message was edited by: LowBbYes, that seems to be the case, but I didn't do good enough research when he asked if I wanted a license for Leopard. For some reason, I had it in my mind that a Family pack came with multi DVD's for people. Maybe that's why he sold me a license so cheap. I thought I was getting a bargin, you get what you pay for.
So, I have the hardware test DVD's that came with the iMac and the Tiger drop-in is just an upgrade with no Hardware Test, you are correct.
But: (let me make sure I have this right) I should not use the 10.3 DVD's or the Tiger drop-in to repair a disc (not permissions) on a hard drive running Leopard. Is this what you are saying? I kind of thought this would be the case. If it is, I'm going to install MY stuff that I have the DVD's for on the external as an emergency boot disc. -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. CPU t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Tried SMC, NVRAM, PRAM. Reinstalled all softwere. Nothing changed.
I suspect you have hardware problem with a fan sensor. Doing a software install will not help the machine needs to be taken in for service. If you run Apple Hardware Test in Extended Mode it should reveal the error code. If it does not then run AHT an additional 2-3 times to be sure in Extended Mode. Each pass will take about 30-60 minutes.
-
I want to run automation test in multiple device say iphone and ipad or two iphone device Is it possible.I have done automation testing using UIAutomation and get it running from iphone device
plzzz reply to this question as soon as possible
-
Running Hardware Test from second Mac?
My wife has a 2.4 GHz Intel Core 2 Duo iMac. It has a faulty DVD drive - actually a disc has been stuck in there for some time and we haven't been able to get it out. That is not our current issue, although it makes troubleshooting much harder.
Her iMac is getting slower and slower and I promised I'd run some tests. I can't run the Hardware Test on that machine from the original install disc because of the faulty DVD drive. I'd like to run the test remotely from my MacBook Pro but can't work out how to do that. I have tried booting her Mac in Target mode where I can run Disk Utility on my machine and repair her hard drive but when I insert her original Install Disc in my laptop there is no Hardware Test visible on it. I have tried to get access to my DVD drive from her iMac but 'DVD or CD Sharing' being turned on in 'Sharing Prefs' on my machine doesn't seem to bring up any shared discs on her computer. Maybe it's still trying to access her faulty DVD drive?
Is there anything I can do here to run some hardware tests on her machine? I'd like to do that before I start doing clean installs of the Mac OS on hard drives etc. I'm a bit stuck.
Thank youFive ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
Running the AHT doesn't make much sense for fixing slowness. If the computer is working, then there is no hardware failure. See the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Can not run hardware test on nMP
I have Mac Pro late 2013, 6 cores, 16 Gb RAM, Yosemite. I have followed Apple instructions how to run hardware test. Both using D and Alt D at startup. Unplugged devices, plugged devices. The only thing I see is a row of languages and option to shut down or restart with black background I check English and hit return. After that nothing happens. Is there somone who could explain ?
Using Apple Diagnostics
Using Apple Diagnostics - Apple Support
I take it you are using a wired keyboard and you are not seeing the display: -
I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't work
I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't working. I need some help with this.
Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
• Adobe product and version number
• Operating system and version number
• Browser and version number (where applicable)
• The full text of any error message(s)
• What you were doing when the problem occurred
• Screenshots of the problem (if possible)
• Computer hardware, such as CPU; GPU; amount of RAM; etc. -
I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????
Connect the iOS device to your computer and try to make a backup.
iOS: How to back up
Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Can I Run 333Mhz ram in a power mac g5 that uses 400mhz?
Can I Run 333Mhz ram in a power mac g5 that uses 400mhz?
No; RAM which can't keep up with the computer's bus will be ignored. Faster RAM will work as long as it's able to operate at the speed the bus requires.
In any case, ensure that the vendor advertises compatibility with your Mac model.
(75453) -
I want to install my Quadro FX 560 to my MAC PRO, but it can't work normall
I installed my Quadro FX 560 to my MAC PRO, but it can't work normally.
I can't find any drivers of Quadro FX 560 for MAC OS, and I am using MAC OS 10.4.7.
Would you like to give me the Quadro FX 560 driver for MAC OS??
My display card come from my old PC...but not use any more...
So I want to replace GeForce 7300 to Quadro FX560..
Mac Pro Mac OS X (10.4.7)Would you like to give me the Quadro FX 560 driver for MAC OS??
You will need to firstly check whether it is compatible with your Mac and operating system, and then get the required software from the manufacturers of the Quadro. -
Running windows programs on a power mac g5
Hi i have a power mac g5 and was wondering if there was any way that i could run windows programs on it. I noticed that there was a program called parralle boot? But as i am awear you need to have an intel mac to make this work. Is there any way to make this happen for me?
Virtual PC (from Microsoft) was the way to run Windows on a PowerPC Mac. It did it by emulation, so it's not as fast as the current +virtual machine+ options, such as Parallels Desktop and VMware Fusion on Intel Macs. It should work reasonably well on a Power Mac G5, but it will still be slow compare to running Windows on a real Intel PC.
Microsoft no longer offers Virtual PC for Mac, but it is available from retailers if you search online. The last version was 7, and you can download updaters to update any version 7 release to 7.0.3. -
Hard drive issues; how to run hardware test
A couple of weeks ago my hard drive experienced what I would call "minor crashes". The computer booted up to the grey box with the question mark, and would do nothing more. The hard drive also made unpleasant noises. I think I got it back by resetting PRAM, but it happened a second time, and then a PRAM reset again got it back. Needless to say, I'm nervous about this drive.
I have Apple Care until January '09 (this is an '06 Intel machine) and figure I should try to move on figuring out what's up ASAP (both because I don't want a drive failure, and because I only have a few more months of Care).
I'm guessing that I should run the extended hardware test, but I can't seem to get it going using the Leopard disk I used to upgrade the OS. Do I need the original install disks (which I can't find, of course!)? What else can I do to determine if I have an issue that calls for hard drive replacement? If I need a new hard drive (it now seems small at 250gb anyhow), will I be able to do it myself (assuming Apple Care won't take care of it)?
Any insights welcome. Thanks!Give it a try, if not you'll need to dig up your Disk 1!
+Some Intel-based Macs ship with Apple Hardware Test and Mac OS X 10.4.x preinstalled on the hard drive. If an Erase and Install installation of Mac OS X 10.5 Leopard is performed using a retail Leopard installation disc, Apple Hardware Test will be erased and not reinstalled on these Macs.+
+If you're in this situation and need to use Apple Hardware Test, simply start from the DVD that came with your computer (not the Leopard installation disc) while holding the "D" key. Apple Hardware Test will run from the DVD.+
http://docs.info.apple.com/article.html?artnum=306568 -
G4 15" seems to work, but won't boot Install CD or run Hardware Test
Hello all, I have an odd one here. I have a 15" Powerbook G4 1.67Ghz with Tiger 10.4.10 that works generally OK, but I want to run Repair Disk on it because Console keeps popping up with what seem to be disk-related problems.
When I boot with Install CD 1, the process hangs at an empty blue screen and the CD stops. When I try to run Apple Hardware Test, I get a message that "apple hardware test does not support this machine", even though the Install CD says PowerBook G4 and OS X 10.4.
I've tried swapping the RAM out but it didn't help. What do you think - motherboard issue?
Here are some of the Console messages - perhaps they are actually program execution errors rather than file system errors.
2007-11-28 14:15:42.403 HPEventHandler[214]: DebugAssert: Third Party Client: (NULL != m_lock && 0 == errno) Can't create semaphore lock[/Volumes/Development/HP/Mac-Sirani/mac-software/components/HPEventHandler/ Sources/Core/HPTMNotificationManager.cpp:62]
2007-11-28 14:15:42.632 HP Director (All-in-One)[210] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
(UNKNOWN)
The parser will retry as in 10.2, but the problem should be corrected in the plist.
2007-11-28 14:15:42.658 HP Director (All-in-One)[210] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
(UNKNOWN)That implies you have a .plist problem.
Run Disk Utility, select your hard drive in the left pane, and Repair Permissions from the right pane.
Do that a few times until there are no errors reported, update to 10.4.11, and repair permissions again.
Joe -
My iMac G5 will not run Hardware Test. Please help!!
I need to run a hardware test for two reason:
1. ethernet stopped working [airport does work]
2. if the computer falls asleep it won't wake up
So, I want to find out if it's a hardware or software issue. Problem is, when i try to boot up the Hardware Test nothing happens. The computer starts up normally as if I didn't have the disk in at all.
I am following the instructions in the Hardware test "Read Me" file...put the OS X install disk in & restart holding down the "D" button. The startup screen flashes 2 different colors of grey and then just boots up normally. If I try holding "option" when I restart I get to a screen with the hard drive & the disk as choices to boot, but if I choose the disk I get a really weird screen of text talking about kernel panic & a bunch of stuff I don't know about on top of the grey crash screen telling me to restart.
So after this long-winded question does anyone have any idea what I should do? THANKS!!Try using Disk Utility:
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Maybe you are looking for
-
Chirping noise every 2 seconds, mute stops it!
Today I noticed that my MacBook Pro has suddenly started sounding like there's a small bird trapped inside it. At first I thought I could hear birds outside but it's too rythmical, with a chirping sound made about every 2 seconds. It's coming from th
-
Hello. I have an hp laptop that sat unplugged for a couple of months. when i went to go turn it on when plugged in, the battery light stays on like its charging for like an hour. then it will start to blink. I have sort of tried one solution to u
-
:disgusted; I have been trying (unsuccessfully) to download Adobe's Shockwave player. My daughter was playing a game and we were prompted to load the latest version -- I did so -- or so I thought. Going back into the game we got a message stating tha
-
I have just received a licence number and password for the OS X Lion but am unable to find how to progress from here. Where and how do I download? Thanks
-
ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx