I want to save attachments, not display them

Mail seems to display attachments in the message body. I don't want that. I want to be able to save the attachments. Any ideas?
Message was edited by: DesertRatR

If you are using the web mail interface on Yahoo, it isn't a Mac setting that's doing it. It's possible that Yahoo's web site code isn't very standards-compliant and is having a problem with Safari... have you tried using FireFox to see if that makes a difference?
Another possibility... I don't have any familiarity with Yahoo mail, but perhaps it is normal behavior for the Yahoo web mail to add the contents of text files to the message, rather than attaching them, and perhaps there's a limit imposed on attachment size that the PDF exceeded.

Similar Messages

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

Case attachments not displayed using PCUI CRMD_CASE

Hi all,
We´ve developped an WDA in order to create cases in case management, using BAPI
BAPI_CASE_CREATE, developped as follows:
call function 'BAPI_CASE_CREATE'
    exporting
      case_type              = gc_zcas
    importing
      guid                   = lv_guid
    tables
      return                 = lt_return
      case_attributes        = lt_attributes
      case_notes             = lt_casenotes
      case_note_ids          = lt_casenotesid
      element_identification = lt_identifi
      element_insertion      = lt_insertion
      element_relations      = lt_relations.
call function 'BAPI_TRANSACTION_COMMIT'
    exporting
      wait = 'X'.
On this web dynpro we´ve also created a file upload field in order to attach a document to the case created previously, using method "m_insertar_adjunto".
Method call uses the following parameters:
wd_this->m_insertar_adjunto(
                                  guid     = lv_guid
                                  content = ls_adjunto-filecontent
                                  filename = ls_adjunto-filename
method m_insertar_adjunto .
data: l_folid type soodk,
        l_folderid type soobjinfi1-object_id,
        l_size type i,
        lt_content type table of solisti1.
data ls_content like line of lt_content.
data: ls_document_data type sodocchgi1.
data: l_doctype type soodk-objtp.
data: l_docinfo type sofolenti1.
data: lt_words type table of string,
        l_token type string.
data: l_att_key type swotobjid-objkey.
check content is not initial.
call function 'SO_FOLDER_ROOT_ID_GET'
    exporting
      region                      = 'B'
     importing
      folder_id                   = l_folid
    exceptions
      communication_failure       = 1
      owner_not_exist             = 2
      system_failure              = 3
      x_error                     = 4
      others                      = 5
l_folderid = l_folid.
call function 'SCMS_XSTRING_TO_BINARY'
    exporting
      buffer          = content
      append_to_table = 'X'
    importing
      output_length   = l_size
    tables
      binary_tab      = lt_content.
data: lc_word(100).
l_token = filename.
while l_token ca ''.
    split l_token at '' into lc_word l_token.
endwhile.
split l_token at '.' into lc_word l_doctype.
ls_document_data-obj_name = l_token.
ls_document_data-obj_descr = 'Adjunto Caso'.
ls_document_data-obj_langu = sy-langu.
ls_document_data-doc_size = l_size.
ls_document_data-no_change = 'X'.
call function 'SO_DOCUMENT_INSERT_API1'
    exporting
      folder_id                  = l_folderid
      document_data              = ls_document_data
      document_type              = l_doctype
    importing
      document_info              = l_docinfo
    tables
      object_content             = lt_content
    exceptions
      folder_not_exist           = 1
      document_type_not_exist    = 2
      operation_no_authorization = 3
      parameter_error            = 4
      x_error                    = 5
      enqueue_error              = 6
      others                     = 7.
l_att_key = l_docinfo-doc_id.
data: object_a type sibflporb,
        object_b type sibflporb.
object_a-instid = guid.
object_a-typeid = 'BUS20900'.
object_a-catid = 'BO'.
object_b-instid = l_att_key.
object_b-typeid = 'MESSAGE'.
object_b-catid = 'BO'.
try.
call method cl_binary_relation=>create_link
    exporting
      is_object_a = object_a
      is_object_b = object_b
      ip_reltype = 'ATTA'.
endtry.
if sy-subrc eq 0.
    commit work and wait.
endif.
endmethod.
Our problem is the following: when we ONLY use PCUI CRMD_CASE (case management) something goes wrong, because case is displayed but its attachments do not appear.
The behaviour is not the same if you display case in GUI or in PCUI; even if you enter firstly in CRM GUI and afterwards in PCUI, the behaviour changes; the possibilities are the following:
1 --> Using CRM GUI (only) case and attachments are displayed right.
2 --> Using PCUI CRMD_CASE (only) and not entering previously on CRM GUI, case is displayed right but its attachments are lost.
3 --> If you enter CRM GUI firstly to see case and attachments and entering PCUI CRMD_CASE afterwards, everything (case and attach) is displayed right.
It seems that something is refreshed in database when you enter in CRM GUI and this is exactly what allows system to show rightly in PCUI.
We don´t know how to solve the problem.
Could anybody help us to solve this issue?
Thanks in advance.
Carmen Rodriguez

Hi Carmen,
You can use FM ZGI_CREAR_ADJUNTO_CASO to solve your problem.
FUNCTION ZGI_CREAR_ADJUNTO_CASO.
""Interfase local
*" IMPORTING
*"     REFERENCE(GUID) TYPE BAPISCMGCASE-CASE_GUID
*"     REFERENCE(FILENAME) TYPE STRING
*"     REFERENCE(FILECONTENT) TYPE XSTRING
Variables
data: lv_business_object type sibflporb.
data: ls_new_phio    type skwf_io,
        ls_new_loio    type skwf_io,
        lv_error       type skwf_error,
        lv_size type i.
data: lv_doctype type soodk-objtp.
data: ls_document_data type sodocchgi1.
data: lt_filecontent type table of sdokcntbin .
data: lv_retcode     type sy-subrc.
data: lv_objkey      type swo_typeid.
data: ls_fileinfo   type sdokfilaci,
        lt_fileinfos type table of sdokfilaci.
data: ls_file_info type crmt_icss_file_info.
data: lt_loio_properties type table of sdokpropty,
        lt_phio_properties type table of sdokpropty.
data ls_property        type sdokpropty.
data: lv_length type i.
data: lv_file(1200),
      lv_dir(1200),
      lv_delimiter        type c,
      lv_offset           type i,
      lv_bytes            type i,
      lv_delimiter_offset type i,
      lv_delimiter_bytes type i,
      lv_char             type c,
      lv_previous_char    type c,
      lv_last_char        type c.
check filecontent is not initial.
class
class cl_kwui_utilities definition load.
Binary
call function 'SCMS_XSTRING_TO_BINARY'
    exporting
      buffer          = filecontent
      append_to_table = 'X'
    importing
      output_length   = lv_size
    tables
      binary_tab      = lt_filecontent.
file name
lv_length = strlen( filename ).
lv_offset = 0.
while lv_offset < lv_length.
Remember last character
    lv_last_char = lv_char.
    lv_bytes = charlen( filename+lv_offset ).
Get current character
    lv_char = filename+lv_offset(lv_bytes).
    if lv_char = '/' or
       lv_char = '' or
       lv_char = ':'.
      if lv_delimiter is initial or
         lv_delimiter = ':'.
        lv_delimiter = lv_char.
      endif.
      if lv_char = lv_delimiter.
        lv_delimiter_offset = lv_offset.
        lv_delimiter_bytes = lv_bytes.
      remember character in front of delimiter:
        lv_previous_char = lv_last_char.
      endif.
    endif.
    lv_offset = lv_offset + lv_bytes.
endwhile.
if not lv_delimiter is initial.
    lv_offset = lv_delimiter_offset + lv_delimiter_bytes.
    lv_file = filename+lv_offset.
    if lv_previous_char = ':' or lv_delimiter = ':'.
    path ends with or after drive identifer, include the delimiter
      lv_dir = filename(lv_offset).
    elseif not lv_delimiter_offset is initial.
    do not include a trailing delimiter for compatibility reasons
      lv_dir = filename(lv_delimiter_offset).
    else.
      clear lv_dir.
    endif.
else.
    lv_dir = space.
    lv_file = filename.
endif.
PHIO
Description
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_description ) is initial.
    ls_property-name = skwfc_prop_description.
    ls_property-value = 'Adjunto Caso'..
    append ls_property to lt_phio_properties.
endif.
Link name
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_relative_url ) is initial.
    ls_property-name = skwfc_prop_relative_url.
    ls_property-value = lv_file..
    append ls_property to lt_phio_properties.
endif.
Language
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_language ) is initial.
    ls_property-name = skwfc_prop_language.
    ls_property-value = sy-langu.
    append ls_property to lt_phio_properties.
endif.
*LOIO
Description
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_description ) is initial.
    ls_property-name = skwfc_prop_description.
    ls_property-value = 'Adjunto Caso'..
    append ls_property to lt_loio_properties.
endif.
Link name
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_relative_url ) is initial.
    ls_property-name = skwfc_prop_relative_url.
    ls_property-value = lv_file.
    append ls_property to lt_loio_properties.
endif.
Language
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_orig_language ) is initial.
    ls_property-name = skwfc_prop_orig_language.
    ls_property-value = sy-langu.
    append ls_property to lt_loio_properties.
endif.
create the document itself
clear lv_error.
clear ls_new_phio.
clear ls_new_loio.
clear lv_objkey.
call function 'SKWF_LOIO_WITH_PHIO_CREATE'
    exporting
      loio_class      = 'CRM_L_CASE'
      phio_class      = 'CRM_P_CASE'
    importing
      error           = lv_error
      phio            = ls_new_phio
      loio            = ls_new_loio
    tables
      loio_properties = lt_loio_properties
      phio_properties = lt_phio_properties.
if lv_error is not initial.
    exit.
endif.
file information
ls_fileinfo-file_size = lv_size.
ls_fileinfo-binary_flg = 'X'.
ls_fileinfo-file_name = lv_file.
call function 'SDOK_MIMETYPE_GET'
    exporting
      extension            = lv_doctype
      x_use_local_registry = 'X'
    importing
      mimetype             = ls_fileinfo-mimetype.
append ls_fileinfo to lt_fileinfos.
file store
clear lv_error.
call function 'SKWF_PHIO_STORE_CONTENT'
    exporting
      phio                = ls_new_phio
    importing
      error               = lv_error
    tables
      file_access_info    = lt_fileinfos
      file_content_binary = lt_filecontent.
if lv_error is not initial.
    exit.
endif.
Fill BO 'BUS20900'.
clear lv_business_object.
lv_business_object-instid = guid.
lv_business_object-typeid = 'BUS20900'.
lv_business_object-catid = 'BO'.
Link create
try.
      call function 'SKWG_OLS_IO_LINK_CREATE'
        exporting
          io              = ls_new_loio
          business_object = lv_business_object.
    catch cx_obl.
    cleanup.
endtry.
ENDFUNCTION.
Regards
José Miguel Haro

Photo Attachments not Displaying in Gmail

I'm using an iPod touch 3rd Gen 32GB to check my Gmail over wifi. I received an email with two photos today and the photos are not displaying on the iPod. I see a question mark in the center of the space for the photo. I can't find any settings for this. But, I'm new to this so i may be looking in the wrong place. Any suggestions to get this to work?

Hi All,
I am facing the same issue w.r.t Photo Display in MSS General Information.
Whenever i logged into MSS General info its asking ECC system Credentials to Display the Photo.
it showing the Error like
SAP ArchiveLink: Data Element for Absolute URI
can you please give me the solution
Earlier its asked me the credentials in ChangeOwnData - PhotoDisplay, but after FQDN,its not asking any Credentials. Photo is Displaying fine in COD Service in ESS.
Please suggest me the solutin for Credentials asking in Photo Display in MSS..
Thanks in Advance
Adapag

Draft Message multiple attachments not displayed or sending

When creating a draft message with mutiple attachments, they are displayed in the preview window but opening the message only displays a single attachment. Sending the message will only send the single attachment. Closing the message window and previewing from the draft folder will display all attachments again although they will disappear when re-opening the message.
The same problem occurs on two separate machines of work colleagues. All attachments are Word documents.
Powerbook G4 Mac OS X (10.4.6) Mac Mail version 2.0.7

Nick, I'm using an old version of Word so I'm not sure if this applies, but my Word attachments never open in preview. Are you sure one of them is not a PDF?

Is it possible to save files to one desktop so that they remain on that desktop and don't follow to other desktops when swiping between them? I want to save files and keep them on desktop 2 so that I can keep desktop 1 free of files but they follow.

I want to keep my school files on desktop two so they are all in the same place, and use desktop one as a place to perhaps save photos or other files not school related. When I swipe between desktops, the school files move between the desktops as I swipe but I want to keep them on one desktop all the time.

No, that can't be done. All desktops will show what is in the 'Desktop' folder in your home folder.

WMV attachments not displaying in messages after QT 7.5.5 update.

My mother gets a lot of attachments from family, specifically videos in windows media video format. According to her, the WMV attachments used to display within the mail messages (without having to download them). This worked correctly, previous to the new Quicktime 7.5.5 update, however after the update, it now only plays the audio from the videos (however saving the attachments and actually opening them in Quicktime works fine).
She is using a Mac Mini, but she has forwarded some e-mails to my iMac and I get the same results. Both computer are running the same versions of Leopard, Quicktime, and iTunes (all the newest versions). Flip4Mac has been installed on each machine before and after the issue, and I updated that to latest version as well to see if that would fix it, but it didn't.
Any suggestions? Thanks.

Greg,
Received and thanks!
I can replicate the problem, but found out that I have not yet installed Flip4Mac on my other computer, and have not had time to test in any but my primary boot volume. When I control-clicked on the attachment and selected to open with WMV, I got a message that my Flip4Mac was out-of-date. But updating did not correct the problem as others have found
I will need some time to chase this some more, and to raise a flag about it.
Ernie

Attachments not displaying

So, I've had a bunch of random things happen to my PowerBook lately, and I think they might be related.
First my iPhoto library became corrupted. Then I somehow lost my Address Book. I've been to the Genius Bar twice to have these problems fixed, so I'm no longer concerned with them, except in a general sense that there has been a series of random things happening to my PowerBook in a short period of time.
Anyway, now, my Mail program is acting weird: First of all, a bunch of e-mail that I had recently saved to folders "On My Mac" no longer displays, instead I get a message telling me to take my account online to download the message - despite the fact that my account is online.
A bigger problem is that many attachments that previously worked (PDF and JPG files, now display as simply large, large strings of random characters preceeded by something like this: --part129f.4acb6d6.3112c42e_relboundary
Content-ID: <[email protected]>
Content-Type: image/jpeg; name="ygp3496.jpg"
Content-Disposition: inline
Content-Transfer-Encoding: base64
Any idea what's going on with my computer - especially Mail, and how to fix these problems?
Powerbook G4 1.25 Mac OS X (10.4.4)

Greg,
Received and thanks!
I can replicate the problem, but found out that I have not yet installed Flip4Mac on my other computer, and have not had time to test in any but my primary boot volume. When I control-clicked on the attachment and selected to open with WMV, I got a message that my Flip4Mac was out-of-date. But updating did not correct the problem as others have found
I will need some time to chase this some more, and to raise a flag about it.
Ernie

Screen saver do not display at 15seconds

hi everyone.
I need to set a screen saver to start at 15seconds in macOS X (10.5). This needs to be configured in a particular way since the screen saver is in an secondary account with no admin privileges and parental control turned on.
Basically in this account the user can only access the internet (through Safari).
Now, i've already defined the command "defaults -currentHost write com.apple.screensaver idleTime 15" (in the terminal of the administrative account)and it's works fine. But when i log into the account with limited privileges and run the same script the screen saver only displays after three minutes of inactivity.
Any ideas?
thanks

Try using 'su' instead of actually logging into the other account (if you're not already doing that).
In Terminal, while in your admin account, type 'su <15secAcct>' - of course without the quotes and with <15secAcct> replaced by the name of the account whose screensaver time you want to change. It'll ask you for the password for that account.
Then, enter your defaults command to set the screensaver. Type 'exit' to leave that user account and return to your own; then, 'exit' again to get out of Terminal. (Again, maybe you know this, but just in case...)
That should work for you.

I am organizing my external HD and want to move files NOT COPY them. How do I drag and drop folder contents without Mac automatically copying them to the "drop" location?

I am sorting out all the clutter and duplicate files on my external HD. In doing this I am moving the entire contents of folders to new locations. Some of these folders cointain gigs of info. I do not want to have to spend large amounts of time waiting for hundreds of gigs to copy somewhere then moving the originals to the trash and wait even longer deleting all of them. All I want to do is move the files up a subfolder, but the way Finder goes aobut doing it can be a 400 GB swing taking hours. How do I just "move" them?

Check out this discussion. Worked for me.
http://tinyurl.com/7dmh9p5
Quote:
When I do a drag and drop in Finder to move a folder into another folder it makes a copy of the folder in the new location instead of moving it like the help documentation says and like it used to do in Snow Leopard. I have looked all over in preferences for a setting the contols the move/copy outcome of drag and drop and have been unable to find anything. Is this the way Lion is supposed to work?
MacBook Pro, Mac OS X (10.7.1)
This solved my question by jsd2 on Oct 9, 2011 6:33 AM
I did a global change of permissions for the entire documents account in the currrent user account using the get info and apply to enclosed items.
I think what is happening is that the Documents folder normally carries an "everyone deny delete" ACL, meant to protect it from accidental deletion:
$ ls -lde ~/Documents
drwx------+ 6 t1 staff 204 Oct 9 08:51 /Users/t1/Documents
0: group:everyone deny delete
ACLs are special types of permissions that do not show up in GetInfo, but can get propagated if you click "Apply to Enclosed Items" on a folder that carries them. Affected files that acquire that ACL would require password authentication to move or delete them.
I think the following Terminal command (copy and paste it) should remove such ACLs from items within the Documents folder:
chmod -RN ~/Documents/*
Message was edited by: miz_mdk

Photos/Attachments Not Displaying in Messages

Last week I updated my OS from Mountain Lion to Mavericks on a MBA. I can view all my sent photos but not the ones I received. The images have been replaced with bubbles like this:
If I double click on the bubble the image appears. The attachments are located were they should be in the ~/library/messages/ attachments folder. Being that both incoming and outgoing attachments are stored in this folder it seems strange that Messages would display one catergory and not the other.
I've signed in and out of my icloud account to no effect. Is there a way to restore the link between the app and it's attachment folder or do I need to restore the app itself? And if I restore will I risk losing messages?
Thank you,
Guy

Hello, Guy G.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Jason H..

Email attachments not displaying

Recently I've noticed my iPad and iPhone both have issues displaying the same files - jpg and png - when they are sent as email attachments. I've tried from different accounts to different accounts (I have both Gmail and MobileMe email on my iPad, iPhone and Mac), and the files display correctly on my Mac in both Mail and Preview. But on my iPad and iPhone I just get a little blue question mark. Trying to save the image just saves the little blue question mark.
Anyone got any suggestions? I've tried restarting the devices, deleting/readding email accounts, and modifying/resaving/converting the images on my Mac with both Preview and Photoshop... none of which makes any difference. And yes, I have "Load Remote Images" on in Mail Settings.

I have the same problem I get a email from my security DVD with jpeg attachments and it shows and old picture. It seems the iPad is stuck on the old picture. This happens only on the iPad other devices download correct image.

Mail attachments not displaying correctly

Hi all,
I did a search about this but didn't find anything.
The problem I am having is when I attach a pdf that I made with Illustrator, the pdf will sometimes show up wrong (all black, missing parts of the art, wrong colors, etc) in my message before I send it.
These are proofs that I'm sending to customers and so far, I haven't gotten any complaints. If I open the attachment in Acrobat, it looks fine. Sometimes if I open it in preview or coverflow though, I get the same issue that I see in Mail when I attach it to send.
This only seems to happen with pdf files so far and didn't used to happen. (I'm not sure exactly when it started, probably some time in the last 2-3 months)
Does anyone have any ideas what might be happening?
Thanks

Thanks for the reply Bob.
When I make a pdf in Illustrator, I do a save as and save a pdf that can be read back into Illustrator. (Illustrator Default with compatibility save to Acrobat 6 (PDF 1.5) I have to do it this way to ensure that my files can be read without any issues by printing plate makers once the proof is approved.
I've been saving files this way for the last 3+ years and never had a problem before now.
It is just a cosmetic issue on my end, but I would like to be able to see the pdf accurately before I send it like I used to be able to do.
I've got one customer who uses Preview for pdf's, but they haven't had any issues so far. They also use an older version of Preview (I think they are still running 10.4 or 10.5)
Its good to know the file isn't getting messed up, but I'd like it to work the way it should.
Any other thoughts?

Attachments not displayed inline for quoted printable email

I have one correspondent who uses Outlook on a Mac - no attachments from their emails are displayed in line. I believe that it is due to the fact that the HTML part has content transfer encoding equal to "quoted-printable" and all of the image tags have src=3D"...",
e.g.
<img src=3D"cid:C24BE50E-5D6F-46D3-9EFB-1C569F35CA70" type=3D"ima=
ge/png">
The 3D" seems to be the only difference in a view source compared with an email generated by Thunderbird.
Is there any way of correctly displaying these emails?
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Thunderbird, check out our support website.
Include account names (possibly identifying information)
Application Basics
Name Thunderbird
Version 31.3.0
User Agent Mozilla/5.0 (Windows NT 6.3; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.3.0
Profile Folder
(Local drive)
Application Build ID 20141127140543
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Mail and News Accounts
ID Incoming server Outgoing servers
Name Connection security Authentication method Name Connection security Authentication method Default?
Crash Reports
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Duplicate Contact Manager 0.9.2 true {b4447f60-db9c-11da-a94d-0800200c9a66}
gContactSync 1.1.2 true [email protected]
Lightning 3.3.2 true {e2fda1a4-762b-4020-b5ad-a41df1933103}
LookOut 1.2.13 true [email protected]
Nostalgy 0.2.33 true [email protected]
Provider for Google Calendar 1.0.3 true {a62ef8ec-5fdc-40c2-873c-223b8a6925cc}
QuickFolders 3.14.1 true [email protected]
Signature Switch 1.6.12 true {2ab1b709-ba03-4361-abf9-c50b964ff75d}
StartupMaster 1.6 true {506d044e-41fa-4cc8-9dc6-9ff70e96eebf}
AttachmentExtractor 1.3.5.1 false {35834d20-efdb-4f78-ab77-9635fb4e56c4}
Important Modified Preferences
Name Value
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.disk.smart_size_cached_value 358400
dom.max_chrome_script_run_time 0
extensions.lastAppVersion 31.3.0
font.internaluseonly.changed false
font.language.group x-unicode
font.name.monospace.el Consolas
font.name.monospace.tr Consolas
font.name.monospace.x-baltic Consolas
font.name.monospace.x-central-euro Consolas
font.name.monospace.x-cyrillic Consolas
font.name.monospace.x-unicode Consolas
font.name.monospace.x-western Consolas
font.name.sans-serif.el Calibri
font.name.sans-serif.tr Calibri
font.name.sans-serif.x-baltic Calibri
font.name.sans-serif.x-central-euro Calibri
font.name.sans-serif.x-cyrillic Calibri
font.name.sans-serif.x-unicode Calibri
font.name.sans-serif.x-western Calibri
font.name.serif.el Cambria
font.name.serif.tr Cambria
font.name.serif.x-baltic Cambria
font.name.serif.x-central-euro Cambria
font.name.serif.x-cyrillic Cambria
font.name.serif.x-unicode Cambria
font.name.serif.x-western Tahoma
font.size.fixed.el 14
font.size.fixed.tr 14
font.size.fixed.x-baltic 14
font.size.fixed.x-central-euro 14
font.size.fixed.x-cyrillic 14
font.size.fixed.x-unicode 14
font.size.fixed.x-western 14
font.size.variable.el 17
font.size.variable.tr 17
font.size.variable.x-baltic 17
font.size.variable.x-central-euro 17
font.size.variable.x-cyrillic 17
font.size.variable.x-unicode 17
font.size.variable.x-western 17
gfx.direct3d.last_used_feature_level_idx 0
mail.openMessageBehavior.version 1
mail.winsearch.enable true
mail.winsearch.firstRunDone true
mail.winsearch.global_reindex_time 1315322188
mailnews.database.global.datastore.id 69632081-3877-4fb8-9cb6-4efc696a7e0
network.cookie.cookieBehavior 2
network.cookie.prefsMigrated true
places.database.lastMaintenance 1420755859
places.history.expiration.transient_current_max_pages 104858
places.history.expiration.transient_optimal_database_size 167772160
plugin.importedState true
Graphics
Adapter Description Intel(R) HD Graphics 4600
Vendor ID 0x8086
Device ID 0x0412
Adapter RAM Unknown
Adapter Drivers igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Driver Version 10.18.10.3277
Driver Date 8-19-2013
Direct2D Enabled true
DirectWrite Enabled true (6.3.9600.17415)
ClearType Parameters Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 100
WebGL Renderer false
GPU Accelerated Windows 5/5 Direct3D 10
AzureCanvasBackend direct2d
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend cairo
AzureContentBackend direct2d
JavaScript
Incremental GC 1
Accessibility
Activated 0
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS Util 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS S/MIME 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC

Sorry.

I want to save attachments, not display them

Similar Messages

Maybe you are looking for