I want to see all the passwords in my keychain.
A couple weeks ago I managed to list all passwords in a keychain in one window, probably using Keychain Access.
They appeared in another column.
Now I can't figure out how I did it.
It is too painful to list them one at a time by clicking the show password box.
What is the trick?
That sounds familiar, but I can't find it any menu, or context menu, or window.
Should it be in the "Keychain Access" menu in the menu bar?
Similar Messages
-
If I want to see all the outgoing mails that were sent today, how to do it
Hi,
I'm useing the IC webclient INBOX.
In the inbox I can't see outgoing mails unless it is linked to interaction record.
why ?
If I want to see all the outgoing mails that were sent today, how to do it ?
Thanks in advance.Hi,
With a sapgui connection, you can use transaction code SOST to see outgoing mails.
Regards,
Olivier -
I want to see all the EE data plan options.
i Have signed up for 1 month 50M EE data plan but I want to see the other options. iPad just says I already have a plan and won't show other options. The EE site is no help either
I Am from the U.S. I just tried a search for EE data plans and was able to see their web site that had information on all of their plans. If you can't find what you need there, then you may need to go to their office / store and talk with someone directly. There isn't much we can do for you here. This is a user to user forum.
-
I want to SEE all the FONTS!!! I could in Word!
Ok so here it is, this has been bugging me for some time. Is there anyway of allowing the font list in the floating font box to display the fonts so i can see at a glance what font i need, rather than having to select a word to see what the font looks like. The font preview box is just not good enough. If not i hope that future versions of Pages will have this feature as it would speed up my work flow greatly.
Many thanks,
AlexThis was already selected, but still no fonts show even when i hold the option key. I'm sure i must doing something wrong though.
-
Hi All,
I have been using Mail for the past three years without need to send a regular mailing list mailout.
I now need to send group emails and all I want to do is browse my contacts aquired over the last three years to create a list. I have not used Address Book for anything other than phone contacts so please do not point me in that dirrection.
There must be a list of all email contacts stored somewhere on the Mac that I can look through. It is an almost impossible task to do this by browsing my inbox/sent folders.
Hope you can help and thanks in advance!
Best
Adam0. find the user id.
a. log in as that specific user.
b. run terminal
c. type "echo $UID"
d. write down the user id that will be displayed
1. Go to the finder
2. go to the user home folder
3. click the box with the magnifying glass (upper right corner of the window)
4. type .jpg
5. a menu will pop under the magnifying glass box, select "jpg image"
6. click the "plus" sign that's displayed to the right of the word "save"
7. two pull down menus will appear, select "other" from the first one
8. a new window will pull down, scroll to "owner" and select it
9. back in the original window type the user id (a number) to the right of "owner" "equals"
Hope this helps -
Firefox Welcome Page
Download Helper Extension Page
Google Shortcuts Extension Page
Download Status Bar Extension Page
This happens each and every time Firefox opens, whether there is a new update or not. I currently have these extensions disabled until I can resolve this issue.Open Firefox preferences/options. On the General tab you can specify what Firefox should do when it starts. I would guess that you have "Show my windows and tabs from last time" selected. Select "Show my home page" and set your home page in the text box.
-
Can we see all the Technical names and field/common names in one screen
Hi SAP Gurus,
Can any one plz. clearify the querry of 'all the technical names, field names, common names, table names in one screen? if so, how?
Thanks inadvance
Regards
NamrataHi,
For a particular screen,if u want to see all the technical data,
Go to system->status->screen->double click on the screen->flow logic.
Regards,
Manoj. -
hi , i want to see all my photos and other throo the icloud in the computer how i can do it ?
Well, the obvious advice is to restore your mac's backup to the new drive - I assume you've been using Time Machine.
If you haven't been backing up the mac, then ...
For photos, sync the iphone to the mac vis iTunes/USB and get the photos back into iPhone on the mac. Getting back the itunes is another problem. You can look for mac apps that read an iOS device and copy songs to the mac. But that won't get back all the other information that iTunes used to have. Again, only a backup would restore all that data. As for purchased items from the iTunes store, use the mac and connect to the store via itunes and check the purchased tab or link. There you can redownload all purchased music and other items. -
I accidently cleared the push notifications on my i pad and now i want to see them back.is there any way to see them,because i have to see all the application what the notifications was for.it takes a lot of time.i am isking this to save my time in future
I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt! -
I want to see both the ssid in same time
help in aironet 1200
i hope to help me,
i have created two ssid with two vlan's but the broadcast is for one ssid only, i want the broadcasting for all my ssid in same time. where that the one ssid be appeared and other one be a hiden.
so how can i do that?
I want to see both the ssid in same time
EXD-AP#
EXD-AP#sh run
Building configuration...
Current configuration : 4617 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname EXD-AP
ip subnet-zero
ip domain name Schoch-home.com
ip name-server 172.16.0.3
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 vlan-name test vlan 1
dot11 ssid EXDINT
vlan 30
authentication open
authentication key-management wpa
guest-mode
infrastructure-ssid
wpa-psk ascii 7 14120A0F410D243F04796166
dot11 ssid GUEST
vlan 20
authentication open
authentication key-management wpa
wpa-psk ascii 7 13000F1646050A3E0B777A62
username 78e400ed9588 password 7 06515724181E591C014E475354
username 78e400ed9588 autocommand exit
username 001e65ee5c38 password 7 135547430E5A512F2E712B606D
username 001e65ee5c38 autocommand exit
username 002668ec5b49 password 7 144742595A52722E277D31617B
username 002668ec5b49 autocommand exit
username 0022fc5b437b password 7 15425B5E562C28712A67667511
username 0022fc5b437b autocommand exit
username 00234d9fa256 password 7 075F711E1D5D1D5C1113595952
username 00234d9fa256 autocommand exit
username iqbal privilege 15 password 7 00010B02240A5955
username c417fea872a3 password 7 04585F575827494F514E571641
username c417fea872a3 autocommand exit
username 0016cf264d57 password 7 040B5B5759224A1C5F4D014245
username 0016cf264d57 autocommand exit
username exd-hq privilege 15 password 7 00010B02240A5955
username 00268202706b password 7 15425B5E527279747A64657411
username 00268202706b autocommand exit
username 002314054ea0 password 7 091C1E5B4A5443425E58012B7B
username 002314054ea0 autocommand exit
username 002436e8f6ca password 7 1249554546585A01722D722B32
username 002436e8f6ca autocommand exit
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
encryption vlan 30 mode ciphers tkip
encryption vlan 20 mode ciphers tkip
ssid EXDINT
ssid GUEST
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
station-role root
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers tkip
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio1.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio1.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
ip address 192.168.30.10 255.255.255.0
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.30.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.30.1
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 route ip
line con 0
line vty 0 4
end
EXD-AP#
EXD-AP#
EXD-AP#I think that my AP not support the MBSSID doue to it's very old , can update it ? if i can that how i do that?
System Software Version: Cisco IOS Software
Product/Model Number:
AIR-AP1210
Top Assembly Serial Number:
FHK0712J02R
System Software Filename:
c1200-k9w7-tar.123-8.JEA3
System Software Version:
12.3(8)JEA3
Bootloader Version:
12.2(8)JA
System Uptime:
3 days, 32 minutes -
I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
DavidEither of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk. -
I recently bought an ipad 2 and wanted to use all the apps on my iphone4 on my ipad but have been charged for the first app I downloaded when I use the same apple id. What should I have done to share the apps and should I have been charged? 2 months ago when I got a new iphone, i was told in order to get all my apps back as I hadn't backed up my files, if I used the same apple id I would 'purchase' the app, but then would not be charged as apple would recognise that I have already purchased the app. That worked, but when I did the same thing on my ipad 2 using the same apple Id, I was charged... what should I have done and is this right as I thought the whole point of having multiple apple devices was I could share apps between devices. please help! thanks.
Using the same Apple id and Password you should be able to download purchased apps without being charged again.
I download to an iPad/iPad2/iPhone3 & iPhone4 with no problem. -
I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?
I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Hi
Hope one of you can help, thanks in advance.......
windows 8/iphone 5s/latest IOS
I've synced my iphone with my pc and backed up too and when i go into music on my iphone i can see all the tunes listed on there including album covers etc but when i go to play one of the tunes nothing happens or sometimes the phone goes kind of crazy and seems to scroll through every album (visually) on the phone and then stop?! still without playing any actual music?
In the apple store they told me to un-sync music and then re-sync which i did but this hasn't worked. although when i had un-synced and went into my phone to check whether music had been removed it was still there (but still didn't play as described above)
so really i want to know either 1) how to properly delete all the songs from the phone and then re-install them or 2) just get them to sync properly!
Other info - i transfered itunes to a new pc recently and up until just now, i couldn't play these tunes on itunes on my PC, they opened in some terrible microsoft thing - but i just changed the file associations inside windows and now they play great - just not on my phone as described above - maybe this has something to do with the problem?
Also, this only applies to music copied from cd-> itunes on pc 1 ->itunes on pc 2-> iphone. songs purchased from itunes store work fine
Thanks for reading"I was thinking I would just connect my iPhone and all of my music and other stuff would transfer to the new computer. "
Not true. The music and pic sync is one way - computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
You really should transfer everything from the old computer, or your backup copy of your computer. Since you do not have access to the old computer, then use your backup copy of the old computer.
If for some reason you have failed to maintain a backup copy of your computer ( not good), then you would have to transfer itunes purchased as described earlier. Any other itunes content would be lost.
You can e-mail photo library pics to yourself, but they will not be of the original quality.
Before syncing, enter at least one unique contact and calendar entry on the computer. When you first sync, then you should get the option to merge the data. -
How do I organise my library to be able see all the projects properly on Final Cut Pro 10.
I've now done several projects, and if I want to find an old one, I go to open library, and then I have to wade through a list of 'Macintosh HD Projects and Events' and then a long number so I click at random, not knowing if I'm opening 'The Faith Machine' 'Dad's Away' or 'Jack and Jems'. And a lot of the time I'll click on one item, and it will open one project, and then I'll click on another project five more down the list and it'll be exactly the same project that I've opened twice. Just above the timeline there are the two little arrows to navigate between projects but I can only use them if I've gone up to file, open library and click on any of these projects. I have a total of 6 projects but for some reason there are endless projects that seem to come up and I seem to have lost some.
I knew someone who had Final Cut Pro 10 and she was able to navigate away from one timeline/one project and see all the projects she'd worked on in the space where the timeline is. Then she clicked on each project and that would open. It was very simple, but it seems to be really difficult if i simply want to open up a past project.
Thanks
TomAll i have done is right clicked the song > add to > '(Name)'s ipod' and normally my music will go to my ipod, but it didn't, is there a way to automatically set my music to download straight to my ipod instead of manually doing it
Maybe you are looking for
-
Ibooks author file larger than it should be
Hello, I started a new ibooks author file a little while ago. I began by dragging in a number of tiff files that I created in a music noatation program. It was about 500 images at about 50 - 60 kb each. I also pasted a few jpgs of a smaller size.
-
Dual currency Configuration In SAP B1
Hi..................................... How to Congiured dual currency in SAP Business one. How's impletmante dual currency in sales A/R & Purchsae A/P. Regards, Gopen Shah
-
Hello everyone! I have a problem that I suspect some of you might have experienced. I have an Acer Aspire V5-573G for a little more than a year now. Yesterday my LCD started flickering with grey and white colours. It normally gets back to normal as s
-
Hi SAP Gurus, Is there a report to find out the production orders that are closed. If there is can you please let me know how I need to check this. Regards, Hari
-
In the HTML page, in a <table>, I've inserted an applet. In the <TABLE> tag, there is a background image. Is it possible to see this background image ( perhaps by setting a transparency attribute of the applet ) as abckground of the applet ? Thanks a