I want to see some data on every page
Hi Tim,
I would like to see the some header message on each page of Xml Report.....
could u tell me the actual procedure.
My Requirement is:
Header Information And Line Information...If line information exceeds one page
The Header Information again printed on next page also.
Plz reply
Thanks &Regards
M.Madhu
Thanks for getting me started. The final thing that worked
and got the
user name displayed on the page
<%
response.write(Session("Username"))
%>
Similar Messages
-
how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?
What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices. -
I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?
If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing -
Want to write some data into xls or cvs in defferent sheet
Hello,
I want to write some data into xls or cvs in defferent sheet (under one xls or csv file).
suppose i have 3 StringBuffer i want to to write one StringBuffer into one sheet1 another one in sheet2 and last one in sheet3.
Please suggest me somthing.First of: csv files don't have sheets. Only Excel files have that.
Second: for Excel you'll have to find a library that implements that format for you. Apache POI is one possible choice, jExcelAPI is another one. -
User wants to see textual data for smartlist in the reports
Hi,
We have a smartlist for employee status-Single,Married. But these are stored as numbers in essbase as 1 and 2. The user wants to see the status as married or single in financial reports. Connection to planning details will do or using any function in the report will do?
please suggestPlease close this thread.
-
Displaying dynamic data on every page of standard text
Hi All,
I m using standard text (created in SO10) in smartform . I want to display dynamic data on the top of every page of standard text.
Displaying the dynamic data is not the problem, but how would i know where is page finished(or started) as Preview in SO10 may not look the same as smartform output.
I dont want to do this manually by adjusting the size of window. Is there any other way to do the same??
Vanita.Try to create a text in your SF and write the dynamic data.
To know in which page use &SFSY-PAGE&
this system fields may also be helpful for dynamic text on each page
&SFSY-COPYCOUNT0& "COPY COUNTER( 0 = ORIGINAL, 1 = 1st COPY)
&SFSY-COPYCOUNT& "COPY COUNTER( 1 = ORIGINAL, 2 = 1st COPY)
Still you can called DYNAMIC text through your standard text.. but place your conditions.
Regards,
SaiRam
Message was edited by:
Sai Ram Reddy Neelapu
Message was edited by:
Sai Ram Reddy Neelapu -
I just want to burn some data...
All I want to do, is backup some home movies I have stored on my mac. I import them from my camera (HDD camera) with iMovie, but I want to archive the original footage. The current event is 11GB, so I can't burn it onto one DVD, and there's no easy way (that I know of) of using finder to split these into managable chunks. I tried selecting a group of files, but there's no way to find out the size of the group (I just get individual sizes when I click 'get info.')
I want a simple way to span the data across discs. I don't mind paying for it- but please don't suggest Toast. I'm tired of fighting with Roxio software on my PC (I have Roxio creator installed on XP on my virtual machine via VM Fusion, but for whatever reason it won't play nice trying to burn multiple discs either). And I'm not paying $80 just for that feature. I can get by with my virtual machine Roxio software for just about anything else, but not this apparently.
When I google "disc spanning mac" all I get is Toast. There's gotta be some other software out there? I noticed Nero doesn't support mac.With all respect to Mr. Reed: hard drives can fail at any time.
Of course they can. So can anything else. That's why you backup, and that's why you shouldn't be satisfied with one backup.
They are designed to last a few years.
That's ridiculous. You're not seriously suggesting that hard drives are designed with failure after a few years considered acceptable?! Hard drives can fail as soon as they come off the assembly line, but I've got hard drives in my house that are 15 years old and still working. I've only had one hard drive fail ever.
There are few studies of the lifetime of burned CDs and DVDs. The ones I have seen agree that some brands last far longer than others. "Archival" brands cost a lot more. Search the web for the latest.
Try this:
http://adterrasperaspera.com/blog/2006/10/30/how-to-choose-cddvd-archival-media -
Want to get SOME data from Time Machine to restore to NEW Drive.
1) System: Leopard.
2) HD configuration: 1TB Time Machine drive backs up internal 500GB AND an external 500GB (called "iMac Annex").
3) The 500GB iMac Annex died.
4) How can I get the iMac Annex Data on Time Machine to restore to a NEW external 500GB drive ("iMax Annex 2").
Migration assistant only seems to ask about the "System to Transfer," and only my internal drive shows up.
Question: Can I drag and drop the folders on Time Machine (from the latest backup set) to iMac Annex 2, then reconfigure Time Machine?hebron,
I have done this little routine in the past, and Time Machine has carried on without the "hiccup" you seem to have had. Also, I was not asked for a destination folder.
However, Time Machine may have changed a bit in this regard in one of the intervening updates, or it could be that I named my "replacement" volume during a format, and the UNIX disk name and the OS X Finder disk name were reproduced exactly as they were prior to the erasure/replacement; in other words, our mileages may have varied.
Nevertheless, I see no real problem for you either way. I suspect that Time Machine is simply performing a "deep traversal" in preparation of a normal backup of what you have, and an entirely new backup will not be created. Let it run its course, and you tell us the outcome. Even if a new backup is made (and not just a large, but normal backup), you have all of your old files, and you have a backup of same. At some point, you can delete any old backup folders, if you end up starting a new one.
Scott -
I am questioning some charges that have been made against my Apple ID account using the App Store. Where can I find a statement of my account to see what the charges on my bank statement correlate Toni the App Store?
http://support.apple.com/kb/HT2727
Regards. -
I want to put some data in a buffer
Hi. I'm Sorin.
I aquire data at 2 sec, and i want to put the numeric values in a buffer to compute the maximum value. How can i do that, or what functions should i use ?( for buffer and maximum). Or, is it another way much simple that that ?
Thank you.Hi Sorin,
you can aquire your data in a loop and use shift registers to store your data (use an array). To get the maximum of the array there is a function in labview "Array Max & Min".
Hope this helps.
Mike -
CAN ANYONE HELP ME OUT, I'M REALLY FRUASTRATED.
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I can not see some parts of web pages, some things are visible others not.
In my mail program most of everything is viewable but the different styles that are available to use above the body of the message are not able to be seen. I can run my mouse over the different spots in the cell to see what that space is but you cant see it. On some web pages that I shop on all the details are available but the buy now button may be doubled and overlapped or just not visible. If I scroll with my mouse over the open areas I can usually find it but not see it. The screen also looks very bright, I've tried to change the colors to try to get the missing data to show but it's been no help. Oh, even now the button to submit this is not visible and the troubleshoot information box is only visible when scrolling over it. Thanks for any help
See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong -
We have some items for sale on our site that have a separate buy now button and layout then others. Is there away to customize some of our product buy now buttons through the web apps?
Use this Link to Contact Apple ID Support and request assistance...
http://www.apple.com/support/appleid/contact/
Also, You have 90 days Free Telephone Support for your New Mac... ( 3 Years if you Purchased the AppleCare Protection Plan) -
I went to about:config and set snav.enabled to false and set social.remote-install.enabled to false but the
facebook twitter email print other bar keeps popping up on the side of every window,
this is very annoying, please help me disable this!!!
thank youDo all social prefs have the default value on the <b>about:config</b> page?
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
The detail is as above. However, could this also be a setting on the computer?
Once you save that to a location on your system.
Make sure Acrobat is Quit and then do this:
1. In the Finder go to the "Go" menu.
2. Select Go to Folder
3. Paste this path into the "Go to the Folder:" field
/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro/Contents/Resources/JavaScripts/
4. Copy the file into the JavaScripts folder.
5. Launch Acrobat
Now you should see the menu spoken of in the blog and web page.
Maybe you are looking for
-
LCD External Display reverting to uncalibrated state
After going through the display calibration process, even when going through the process, my external display will only show the calibrated state when i click on something in the calibration assistant or when i click on a profile, then it reverts bac
-
[SOLVED] pacman fails on a package that should've been ignored anyway
Hi all, I don't understand why the below upgrade isn't working. I exclude the kernel from my normal upgrade command as it prevents me from loading any modules until I reboot, so I typically only upgrade the kernel when I'm about to reboot. In this c
-
No telnet server in Windows 10 tech preview
When I went to enable a telnet server in Windows 10 preview by going to "Turn Windows features on or off," I noticed that there is no option for Telnet Server like there is in Windows 8.1. Running tlntadmn on the command line produces nothing, as doe
-
ORA-12543 When creating a new oracle instance, Oracle 11g
Hello, I am getting the error ORA-12543 at the time i create a new oracle instance! tnsping is OK, and no firewall or anti virus, network is OK. Any idea?? Thanks in advance, Salam
-
How do I remove the Java 1.6.0_41 update from App Store updates list without actually installing it? I don't want to revert to an older Java than what I got from Oracle just a week ago (Java "1.7.0_11"). PS, I thought Apple was no longer doing its ow