I want to sell my Academic version of Final Cut Studio 3.

Do i need to delete any registration off my computer so another person can use the serial number to install? Is there already another license that came with it? I cannot find any information pertaining to this online.
Thank You!

There is no un-register process.
Use this free tool: http://www.digitalrebellion.com/fcsremover/ to remove all traces of FCS3 from your computer.
When you sell your copy, you must include all the original discs, printed documentation and serial numbers.

Similar Messages

  • I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

    I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

    I'm with Jim on this.  It always seems to work out better if you do not install over another version.  You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
    Once that's done, install your newly purchased version.
    -DH

  • Install two versions of final cut studio

    Hi, can I Install two different versions of Final Cut Studio, and let them coexist without the previous one being erased? Let's say I have Final Cut Studio installed, and I want to Install Motion 3 that comes with Final Cut Studio 2, but keep the previous versions of the other programes. Is that possible, or the installing of Motion 3 will affect the Final Cut Pro and other applications that I had installed?

    You could also do a dual boot system, though on a MacBook Pro, it may not work, due to limitations of single internal system drive.
    Not sure what capacity your current system drive has...and you'd really want to think this through before committing.
    You'd essentially do a full archive of your current system drive, then a full erase, create 2 partitions with one running FCS1 and the other running FCS2. You'd likely need to place 'extra content' on an external (like for Motion/STPro/DVDSP/LiveType), to keep resources to a minimum on your system drive.
    Frankly, I'd be hesitant to go that route, but thought I'd toss it out there.
    Ian's suggestion looked much better to me.
    K

  • I have Final Cut Studio 2 which I've never installed. Can I upgrade it to the latest version of Final Cut Studio?

    I have Final Cut Studio 2, which I've never installed. Can I upgrade it to the latest version of Final Cut Studio, or would I need to buy the latest version?
    Thanks, Caoim

    As an alternative, you could purchase FCP-X, which isn't an upgrade; it's a completely new application.  To quote Apple; "It's revolutionary!"  To quote me; "It blows!"
    BTW, Final Cut Studio 2009 was also known as FCS 3.  You might be able to find an upgrade version on ebay or craigslist.
    -DH

  • Next Version of Final Cut Studio?

    I have heard recently about a new version of Final Cut Pro coming out this spring or summer, and am wondering if there is any information about an upgrade for Final Cut Studio as a whole. I am wanting to upgrade my FCS but not until I know more about when the latest and greatest version will be available. Many thanks.

    18 pages of wild speculation and complaining right here: https://discussions.apple.com/thread/2814218?tstart=30

  • Does any version of Final Cut studio support Mpeg4 Editing?

    I have Final Cut Studio HD (version in the black box).  I'm looking at buying a camera, and the one that seems to be the best fit is the Panasonic TM90.  It's best mode is shooting progressive video with the Mpeg4 codec.  Does my version support this?  Does any version support this?

    If you shoot any format OTHER than 1080p60, you use Log and Transfer to bring in the footage.  Tutorial:
    http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
    For 1080p60, you need ClipWrap2 from divergentmedia.com.  Because it is a non-standard shooting format.
    And no, FCP 7 and earlier do not support editing from that camera without transcoding to ProRes.

  • What is the best version of Final Cut Studio

    I'm not a pro but not an amateur video maker so I want to upgrade from FCE 4. I focus on action sports. The question I have is whats the best version of FCS? Thanks!

    The current version. (Your profile says you're running Snow Leopard. You would want the current version of FCS, not an earlier version.)
    What do you want to do that FCE4 seems not to be able to do?
    What specific model Macbook do you have? Models with integrated Intel graphics processors are not supported for FCS.

  • How to Uninstall older version of Final Cut and Motion

    Hello
    I have a older academic version of Final Cut and Motion. I ordered a Full blown version of Final Cut Studio 2 that should arrive this week. How do I uninstall my old version of software? I don't want them conflicting with the new version.
    My other question deals with performance. I'm running a Dual 2.5GHz G5 with 6G of ram. Video Board is the ATI x800XT. Will this system work for editing HDV or am I going to need to buy a new Intel based computer? I really don't want to spend 4K for a new system.
    Thanks
    Bob M

    have a gander a Jon Chappel's FCS Remover over at Digital Rebellion
    http://www.digitalrebellion.com/fcs_remover.htm

  • Final cut studio 2 academic v full retail

    How important is it to have an upgradable version of final cut studio 2, rather than the academic.

    Welcome to the forum!
    This is the Final Cut Express forum. That being said, it is only important to get the full version of FCS2 if you are going to want to upgrade it in the future. The student version gives you some money off the price, but you would have to buy a full student or normal version of the upcoming FCS3 to upgrade. You couldn't get the drastically price-reduced upgrade version in the future.
    Besides pricing, the Final Cut suite is exactly the same whether it is the academic or upgradeable version.

  • Help in installing Final Cut Studio 5.1 Academic

    Help! I had to uninstall old versions of Final Cut Studio.
    I now am trying to install Final Cut Studio 5.1 Academic. Installer rejects the serial number every time. I don't know what to do.
    It's a valid serial number; I have the packaging right here in front of me. It's old (purchased November 2006) but that shouldn't matter, right?
    Please help.

    Hello Brian,
    Thanks for the reply. I was able to read the disc on my Macbook Pro and I copied all of the folders on the install disc onto my flash drive. I plugged it into my iMac and it gave me the following error message: The alias "Install Final Cut Studio" could not be opened, because the original item cannot be found. Delete Alias, Fix Alias, or OK. Deleting the alias just moves the install file to the trash bin. Fixing the Alias asks me to Choose the item that you want alias to "Install Final Cut Studio" to open.
    I could not figure out what to do after this. Any clues?
    Thanks again.
    Steve

  • Production Suite (Academic) to Final Cut Studio (Retail)

    I am looking to upgrade my Production Suite (Academic) to a Full Version of Final Cut Studio. Since this is really not an upgrade will the full version of Final Cut Studio not recognize my Production Suite and install everything separately? Is there anything that I can do to make my transfer easy and seamless?

    Zachary,
    It sounds like you are asking '"Will the retail version install over the academic without problems?" not, "what's the upgrade purchase path."
    Whether the previous version was academic or retail, best practice would be an erase and install. Most problem installations are those that simply install the new verison over the previous one.
    If you have installed thrid party plug-ins (Nattress, etc.) make sure you have the orignial download - don't worry about saving them from the folders.
    good luck.
    x

  • Final Cut Studio Educational version serial number

    I've been using an educational version of Final Cut Studio for years, and now it is asking me for my name and serial number before I open the program.  I've looked at the box that the discs come in, and have found some numbers, but they don't seem to be the serial numbers and they don't work.  Is there somewhere else that these serial numbers may be?  Also, is there a reason why I am forced to put in my information to log in now?
    thanks!

    There are two stickers with the serial # attached to the "Installing your software" pamphlet that came with the suite. This is the only place that you will find it.
    If you have lost the documentaion, follow these instructions:
    http://support.apple.com/kb/HT1861
    >Also, is there a reason why I am forced to put in my information to log in now?
    Have you recently had the computer repaired? The encrypted serial is tied to the Logic board ID. You will need to delete that file if so.

  • Need Help Installing Final Cut Studio Version 2.0.1 on Macbook Pro

    I am trying to install an old version of Final Cut Studio (Final Cut Studio Version 2.0.1) on my macbook pro (OS X Mountain Lion). When I tried to install it, it said, "power pc applications not supported on this computer". I was told to "uninstall" OS X on my computer, install Final Cut Studio, and reinstall OS X Mountain Lion again. Is this true? If so, how do I do this?

    There is a "bug" in the installer application of Final Cut Studio Pro 2 that will fail to work in Lion or Mt. Lion; it will work successfully in Snow Leopard and a subsequent upgrade to Lion or Mt. Lion after the successful installation of FCSP2 will continue to work.
    Once Mt. Lion is installed you can use one of these two methods to install FCSP2:
    1)  Pacifist
    2)  Jeremy Johnstone's Terminal method:
    http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

  • Order status of final cut studio universal version?

    My friend placed order final cut studio last monday (March,27)in stead of me.
    My question is that is it comming universal version or not becasue he does not know about anything final cut.
    also I cannot contact him right now.
    So, if it comes final cut 5.0, i have to return and reorder. because I placed order macbook pro.
    would tell your order experience and when apple released the last version of final cut studio?
    POWER MAC 2.3   Mac OS X (10.4.5)  

    Well, you probably should have waited. I believe the Universal Version was realeased for shipping on the 29th.(I ordered the upgrade myself). It is my understanding that If you ordered it before the release date you will get the old version(runs on PowerPC macs only). I your friend gets the wrong one, I would suggest not opening it and return it for an exchange.

  • I need a new license of final cut. Can I buy Final Cut X and use that serial on an older version of Final Cut?

    I work in a small studio and we hired a new editor. We are staying on an older version of Final Cut Studio and need a new license/serial so we can run it on the new machine without having the 'protection error' over the network.
    We CANNOT upgrade all of the machines at this time - we are in the middle of a few projects and need to keep the workflow going smoothly.
    If we purchase the newest version of Final Cut Studio can we use the license on our old product and wait to install the new one until we can upgrade all of the machines at the same time? we're still on studio 6.
    Thank you!

    >If we purchase the newest version of Final Cut Studio
    The newest version of Final Cut Studio was FCS 3 (aka FCS 2009) which contained FCP 7.  It has been discontinued by Apple and recalled from retailers.  If you can still find a legitimate copy to purchase, you can only use the serial number for that version.  Serial numbers from other versions will not work.
    -DH

Maybe you are looking for

  • Lookup in XI

    Hi All, Pls advice. I read the following blog on Lookup by Siva and it very well suits my lookup requirement. /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler Siva has shown a Communication channel created for Lookup. In my scenari

  • Smsy logical component

    Hi, I am trying to configure maintenance optimizer . 1. How I can define the logical system ? 2. how to define client in logical system ? 3. how to delete logical system if it is wrongly define ? 4. I have gone through so many mopz doc but big cofusi

  • Help with a very basic select

    Hi, I am embarrassed to say this but I can't figure out why this select isn't working.  SELECT single adrnr INTO w_adrnr FROM lfa1   WHERE lifnr = w_lifnr. I know that I have a match in LFA1 where LIFNR = W_LIFNR but the select will not return anythi

  • Multichannel audio downmix monitoring / "Map to Dual Mono" disengages when working with another sequence

    I typically like to edit with multichannel / mono audio channels, but monitor audio with regular speakers by way of downmixing. I found the useful "Map to Dual Mono' button in the audio track mixer which allows one to monitor all the split channels m

  • How to delete an infotype?

    Hi, Can we delete infotypes in HR? If yes how can we do ? Thanks