I want to set media quality to print on a Canon Pixma IP 4000, where do I do that?

I have had that problem with other printers too. Am using Photoshop CS3. When using Windows on a PC I can set printing quality and chose media without a problem. On the Mac I only can set size. Is the pixma 4000 too old? What Canon printer would work, if that is the problem?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

Similar Messages

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit

Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq

I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
You can try this code in the userContent.css file (adjust the max-width accordingly).
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC. Printer worked fine with Netgear previously. With USB from printer direct to Laptop it will print. The printer is definitely set up correctly to acknowledge the router. W

When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
Can anyone offer advice? Thanks.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

How do I set up my iPad to print using my canon pixma ip100 photo printer?

How do I get my canon pixma ip100 photo printer to print two pages from my iPad mini? Iam new with the computer terms & stuff, can any one please help me hook it up in easy terms...thankyou

You would have to either use an app from Canon if they have one or use a 3rd party program such as Printopia, Print Central, Fingerprint, etc. That printer is not Airprint compatible.

Yosemite printer driver for Canon Pixma IP3000

This is not so much a question as a solution to getting my old Canon Pixma IP3000 working again after upgrading to Yosemite.
Although the printer is listed, when I wanted to add it I found no software for it from Apple. Phoning Canon they also said they have no software for the IP3000 and Yosemite. To make a long story short, after much trial and error trying out other drivers which were listed on "choose driver" I found that the IP4500 driver can be configured for cassette feed AND duplex and works on Yosemite. Hope this helps someone else to keep some of the older products going in our throw away society!

I just installed that driver on a 10.10 VM and also found that there is no Duplex Print & Margin menu - just Margin.
I then installed it on a 10.8 VM to be sure the lack of the menu was not due to using the 10.8 driver on 10.10. However I found that even on 10.8, there was no Duplex Print & Margin. So it would seem that duplex printing was not an option for the iP3500.
I then checked an alternate driver suite called Gutenprint and added the iP3500 Gutenprint printer. It also did not support the ability to print duplex.
But when I added another printer, this time using the Gutenprint iP3000 driver, there was the ability to print two sided from the Layout menu. So then I thought it might be worth checking if the Canon iP3000 driver also provides a duplex setting, but the last supported OS for this model was 10.6 so I did not even try to install that old driver on 10.10.
Here is a link to the Gutenprint driver if you would like to try that.

Print wirelessly on canon pixma MP780 from Macbook Pro

Hi
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro. I would appreciate any advice if you know how to do this. Thanks very much.

I believe you should be able to print wirelessly using your MBP and printer. However, you will want to visit the Canon home site and download the current drivers and firmware for your printer. Once you've done this, I hope you'll post back with your results.
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780#DriversAndSoftware
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780?pageKeyCode=prdAdvDetail&docId=0901e0248039b1dc
You're going to need both drivers and firmware.

Printing problems with Canon Pixma IP4700

I used to use a PC, photoshop and my Canon pixma IP4700. With this i could achieve perfect results on an A4 image. I have embedded the correct paper profile and my colour management system was set up just right. I have now upgraded to a mac(running Snow Leopard OS) , but i am now getting problems with my prints. I opened up the exact same .psd file without changing anything and sent it off to print on my canon. The result has came out far too bright?. When i used my PC I would have a lot more controls within my printer driver screen, but now with the mac the printer driver screen dosnt have very many controls at all. Even when i soft proof the print on the print screen it dose not show it any ware near as bright as the end result print.
I am a student of photography and i have asked a few of my class mates and they say that they have had the same problem. They tend to use a professional printers, but as i had received such perfect prints before I know this result is obtainable.
Is there anything anyone can suggest to help??
If there is any more information i can provide to help just let me know.
Thanks a lot in advance

Hi there,
In reading your post I'd be curious to see the cups error log. Given that the Gutenprint drivers would not print also, I would say that something is wrong with the core printing system. The log would show which filter is causing the spooler to stop.
Thinking that it is CUPS related, I would try resetting printing system (if you haven't done so already). Then I would add the queue again using the Gutenprint driver for starters. If this doesn't work then no need to try the Canon driver.
Note that the Canon test print is not an actual print but an instruction to output the inbuilt data. But the test print via the Gutenprint printer queue is a page generated by CUPS. So this would suggest that the CUPS usb backend is okay and something further up the spool creation process is failing. Again, the cups error log would give some clues as to what is going wrong. As to why both driver sets are failing is interesting...
PaHu

Printing Problems with Canon Pixma MP830 under 10.5.5.

Hi All.
Strange one here. I'll try to keep it short.
A client just bought a 24" iMac (running Leopard 10.5.5) and all was great until they tried to connect their Canon Pixma MP830 to it. The client installed connected the printer to the USB port in back, installed the software from the Canon CD, and soon discovered they could not print from any application -- however, they could do a test print (cleanings, alignments, test, etc.) without issue.
They ended up calling both Apple and Canon for several sessions and no one could figure it out.
So I get the call. I remove the printer completely from the system, emtpied the trash, repair permissions, blew out the user and system cache, restart and installed the fresh Leopard-friendly drivers from Canon. I also ran the firmware upgrade for the printer, which took just fine. When I did a test print -- no problem. When I tried to print from Safari -- nothing.
So I then I thought I would try the Gutenprint v5.1.3 drivers for that printer. Nada.
I downloaded the GutenPrint 5.2.0-beta4 drivers, still nada.
At a last ditch effort I tried a new USB cable, still nada.
Curious if anyone has seen this problem and perhaps as a solution? Aside from buying a new printer that is (they are already shopping, but not happy about it).
Thanks!

Hi there,
In reading your post I'd be curious to see the cups error log. Given that the Gutenprint drivers would not print also, I would say that something is wrong with the core printing system. The log would show which filter is causing the spooler to stop.
Thinking that it is CUPS related, I would try resetting printing system (if you haven't done so already). Then I would add the queue again using the Gutenprint driver for starters. If this doesn't work then no need to try the Canon driver.
Note that the Canon test print is not an actual print but an instruction to output the inbuilt data. But the test print via the Gutenprint printer queue is a page generated by CUPS. So this would suggest that the CUPS usb backend is okay and something further up the spool creation process is failing. Again, the cups error log would give some clues as to what is going wrong. As to why both driver sets are failing is interesting...
PaHu

Where can I find a printer driver for Canon Pixma iP6600D? I have Mac OS 10.9.2

I have a great printer Canon Pixma iP6600D, still works great. I want to either download a printer driver or I want to learn how to transfer the driver from my Mac desk top. If I knew where to find the driver I could just manually transfer it from my desktop to my laptop. Both are running maverick.
Can anyone help me?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

Cd printing with a canon pixma ip4200 + photoshop/illustrator

Sorry if im posting this in the wrong forum.
I just recently bought a canon pixma ip4200 printer mainly for its cd printing function.
the software that comes with it is very basic. I have photoshop and illustrator, but i cant get the print to allign properly through these 2 programs. i can only succesfully print with the canon software.
i was just wondering if anyone here uses the same printer with photoshop/illustrator and can get 100% allignment on the print.
Ive played with the settings within photoshop/illustrator, but i dont want to keep wasting cds trying to perfect it.
failing that, does anyone know of any other good software for cd printing.
i recently installed a demo of Disc Cover from MacWorld magazine, but wouldnt want to commit to buying it until i was certain it worked properly.
Cheers

http://discussions.apple.com/thread.jspa?messageID=728440&#728440
http://discussions.apple.com/thread.jspa?messageID=729785&#729785
http://discussions.apple.com/thread.jspa?messageID=1992804&#1992804

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

Problems printing wirelessly with Canon PIXMA iP4500

I have a MacBook Pro 15 in 2.8GHz Core 2 Duo with 4 Gb RAM and I’m running Mac OSX 10.5.7.
1. My Canon PIXMA iP4500 inkjet printer used to work perfectly as a printer attached to the USB port of my Airport Extreme Model A1034 modem, when my computer communicates with the modem either wirelessly or via an ethernet connection between the computer and Airport, but lately it isn’t working.
2. When I try to print the printer icon shows up in the dock and when I click on it a Canon iP4500 series printer dialog box pops up and says the Printer is Ready but the status of the document is “Stopped”.
3. If I click on “Resume” and error message appears: “Operation could not be completed. client-error-not-possible”. This happen repeatedly.
4. I recycled the modem, turned the printer off and on (and did those things in reverse) and ran Airport Utility, all to no avail. I also deleted the printers in my Print & Fax System Preferences dialog box, downloaded the latest CUPS driver from Canon (ver 10.1.0.0), and recreated the printer (called Canon iP4500 Series).
5. Network diagnostics says it can connect to the internet over either my airport or Ethernet connection but it cannot connect to the Canon iP4500 series.riousbprint.tcp.local.
6. Also when I run the Canon IJ Printer Utility from the Canon iP4500 series printer dialog box a Printer List dialog box shows up with no USB-attached printers listed
7. I can print if I connect the printer directly to my MacBook Pro, so I don’t think it’s a driver or USB cable problem. Curiously, when I connect the printer directly to the computer the Print & Fax dialog box automatically creates a second printer called Canon iP4500 series-1. If I use the original Canon iP4500 Series printer in this setup it says “No pages found”.
Basically I’m stumped at this point and would appreciate some help. Unfortunately, I’m on a 3-mo sabbatical and do not have my original Canon printer software with me so I cannot reinstall the printer app unless someone knows how I can obtain it. Similarly I cannot reinstall Leopard either, though it doesn’t seem likely I should need to. Happy to try anything else though.

Hello Basil and welcome to Apple Discussions.
Reading your post, it would suggest there is a problem with the USB of the Airport Extreme, but I don't believe this to be case as there is not much that could go wrong with them. Instead I think there is something not right with the transport (TCP) protocols that get the data from your Mac to the Airport USB.
At this stage, I suggest you look at installing version 5.23 of the Gutenprint driver. This version supports your iP4500 and will help to narrow the cause of the current symptom.
Before installing the Gutenprint driver, I suggest we trash all the current Canon drivers you have installed - we can add them again later if need be.
Open Finder and navigate to Mac HD/Library/Printers/Canon/BJPrinter. Trash all the contents of this folder and empty the trash.
Next, navigate to the Mac HD/Library/Receipts folder. You will see the Canon iP4500 xxx.pkg and another one for the CUPS driver you installed. Trash both of these and empty also.
Now open System Preferences > Print & Fax and delete all the Canon printers in the list (highlight and hit ' - '). It would also be handy to reset the printing system, so while in Print & Fax, move your mouse over the now empty printers list, hold down your Control key and click (or right-click if you can). Click on Reset printing system when it appears.
Now install the Gutenprint drivers. When this is done, restart your Mac and try adding the iP4500 again. This time, after you select the Airport shared printer, you will have to open Print Using and search for the 'Canon iP4500 - Gutenprint v5.2.3'. Select this and now try printing. Let me now the result.
PaHu

Printing on a Canon Pixma MP600 via Airport Express from a Windows 2000 PC

Hi, I'm a Mac: I can print directly connected AND wirelessly to a Canon MP600 printer through Airport Express.
Hi, I'm a PC: I can only print when I'm directly connected to the printer.
Has anyone found a way to print to their Canon through Airport Express?

Try these instructions first: http://www.ifelix.co.uk/tech/1006.html
Another route is to use Bonjour for Windows to be able to access the printer attached to the AirPort base station from your PC.
In addition, not all USB printers work with AirPort base stations for sharing. The following iFelix link provides an "unofficial" list of known compatible printers...and some workarounds.

I want to set media quality to print on a Canon Pixma IP 4000, where do I do that?

Similar Messages

Maybe you are looking for