I want to show the caption in the title bar if the tab bar is hidden.

Is there any addon or configuration setting that i can use to show the caption in the title bar instead of the tab? I want to do this because i have set my browser to hid the tab bar if only one tab is opened.

That is what i asked for but is not exactly what i want. I do not want the menubar to be shown at all. I want the tabs in the titlebar (the default behaviour). I want, when only one tab is open to hide the tabbar (this i have already succeded) and to show the caption in the titlebar.

Similar Messages

How do I get my purchased movies from iTunes to show in my Library without storing all the GBs on my hard drive? [I want to show the Cloud Purchases.]

Hey Hey!
Running OSX 10.9.4 and iTunes 11.3
I am pretty sure that this has been addressed somewhere, but I could not find it - so thanks up front!!!
How do I get my purchased movies from iTunes to show in my iTunes Library without storing all the GBs on my hard drive? I want to show the Cloud Purchases without having hundreds of GBs taking up my HD space.
Thanks!

Deborah,
You cannot import contacts from your Nano to your PC via iTunes. The syncing process is only one way. However, if you enable disk mode on your iPod, open it up in a Windows Explorer window, you should see a Contacts folder. From there you can copy them back over to your PC.
Even though this article is talking about adding contacts to the PC, it should walk you through some of the steps mentioned above.
http://support.apple.com/kb/HT2419?viewlocale=en_US
B-rock

How do i get the approximate size of back up file required to save on disk using sql query because i want to show the required sapce for backup on my application

hi i am face with problem that is i want to show the how much approximate space required for backup or .bak file to get backup using sql query because i want to show the required memory for backup file on my java application

Hi FIROZ
TENNALI
Is this still an issue, or can we close the thread?
* closing a thread by marking the answer/s (there is a link beneath each response) and you can vote for useful responses as well (there is a link to vote on the left of each response)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that? Thank you!

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

No.

I tried linking the facebook contacts to my phone but for some reason the contacts doesnt wants to show the FB images even thought it says that it was sync. What could be the issue? How can it be fixed so i could get my facebook lined up to my contacts?

I tried linking the facebook contacts to my phone(iPhone4s) but for some reason my conatcts doesnt wants to show the FB images in my contacts even though it said facebook contacts were sync. What could be the issue? How can it be fix so I could sync my contacts with Facebook?

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

Dont want to show the divided line between two rows in a Grid.

Hello Friends,
I want a Grid in which I want multiple rows but i dont want to show the divided line between two rows.
It is just like a grid on Territories form(Administrator->SetUp->General->Territories)
Thanks.

Mithun,
The component you're talking about is not a grid, and that component is not exposed by the UI API so you cannot use it.
Regards,
Vítor Vieira

Forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.

hi guys,
if i have a coming call from mobile to my extension and i forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.
is the ""gateway Calling Party Selection* Originator"" configuration on cucm will solve it or no

Hi,
Setting the Calling Party Selection to Originator will send the Original Calling party number to your provider. If your provider accepts any calling number, it is well and good.
you may also need to enable the other setting 'Redirecting Number Delivery Outbound' and Redirecting Party Transformation CSS to ensure the IP phone's number is sent to provider as a Redirecting number along with the original calling number and final called number.
Please collect 'debug isdn q931' for a test call to verify how these numbers are sent to provider.
Thanks
Suresh
Please rate all the helpful posts

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

Want to show the special characters in the tab page title.

Hi,
I am using oracle 10g forms developer and i have created the x bar chart.
I want to give the tab page title of the x bar chart as
x chart
is it possible or any pjc available?
Pls help me.
Balaji
Edited by: Balaji.M on Nov 15, 2008 3:54 PM

ok, what is the special character, is the undescore above the x ?
With standard-forms it's not possible to put multiline-labels on a tab-page. To have a look at the pjc-opportunities, i would start with Francois pjc-site:
http://forms.pjc.bean.over-blog.com/

Why is it that when I set the preference to always show the tab bar, it refuses to stay checked after I quit Firefox and restart it?

Using Mac OSX10.6.7 and FF 4.0.1, I'm having a problem with the preference to always show the tab bar. I want it to always show. I check this in the Preferences under the "tab" window, and everything is fine until I quit FF and when I restart FF the tab bar is gone again. I go into preferences, and that option is now unchecked. How can I fix this so that my preference is saved?

That hasn't helped the last ten times I tried. I posted before. I deleted the preferences file, I tried changing the preferences file, I went into about:config and changed the autoHide preference there. No dice. Firefox is not saving my preference for that one thing.

I have Windows Professional and I used to be able to move the curser over the Firefox icon in the taskbar and it would give me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?

I have Windows 7 Professional and I used to be able to move the curser over the Firefox Icon in the taskbar and it would show me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?

Hey MikeDo,
Do you have the option checked for ''Show Tab Previews in the Windows Taskbar''? If not, just go to ''tools->options->tabs.'' You can find more information on what each of these settings do in the Knowledge Base article [[Options window - Tabs panel]].
Hopefully this helps!

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

In Safari, the iCloud tabs section shows the tabs on my iPod

On my iPod, in Safari, on the tabs screen in the iCloud tabs section it does not show the tabs from my other devices, instead it shows the tabs I had open on my iPod about 10 days ago. Is there any way I could fix this? Thanks!

Got to the i cloud setting on your other devices and turn on safari.

Java preferences window doesn't show the tabs after jdk 7 update 7 installations

java preferences window doen't show the tabs after jdk 7 update 7 installations, before the installations of jdk 7 u7 the tabs in the java preferences window were visible

Then, dump Chrome or uninstall Java 7u7 and connect back tol Java SE 6:
Q: Can I restore Apple Java 6 after uninstalling Oracle Java 7?
A: Go back to Apple Java 6 using the following instructions:
Uninstall Oracle Java 7 by deleting the plug-in file. From a Terminal window enter:
sudo rm -rf /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
Create a symlink using the following command, entered on a single line:
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet Plug-Ins/JavaAppletPlugin.plugin

In Finder in Documents i want to show the folders first and individual documents second and it is the other way at the moment. Cant seem to see where i would change this

In Finder in Documents i want to have the folders show first and the individual documents second. At the moment it is the other way and i can't seem to find how to change it
[email protected]

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

I want to show the caption in the title bar if the tab bar is hidden.

Similar Messages

Maybe you are looking for