I want to take a series of hex characters in a string control and produce an HDLC string indicator for example if the data string control is 3F27 then the HDLC string indicator is 7E003F2700B57E

"thanks for your help "
Does that mean you figured it out already?
If not, see this thread for some HDLC related code.
http://forums.ni.com/ni/board/message?board.id=170&message.id=146859&query.id=3388#M146859
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?

So I am trying to copy my hard drive "Macintosh HD" to an external hard drive, i want to use Terminal and have tried many ways. For example cp -r /Volumes/"Macintosh HD" /Volumes/"NO NAME". When i do it says No such file or directory. Ideas?

The reason that threadjacking is frowned on (as mentioned in the terms use which you can read by clicking the link to the right on this page) is for the most part a practical one:
By starting your own thread your problem can get individual attention, focussed on your particular set of circumstances.
By joining somebody else's thread it becomes tricky to answer more than one question at the same time, and can lead to confusion for both parties.
So if you don't mind the minor inconvenience, please start your own thread (in the correct forum) so we can get to grips with your particular problem!

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply

hello, I already Bridge CS6 installed but can not be accessed by the> parameters color edition menu. The message said that eereur lme Suite Color Management is not enabled. What should I do?
De : gener7 <[email protected]<mailto:[email protected]>>
Répondre à : "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date : mardi 9 septembre 2014 14:20
À : jp <[email protected]<mailto:[email protected]>>
Objet : I want to activate Color Management Suite from purchase via internet photoshop, illustrator and indesign, how? thank you for your reply
Download and install Bridge CC, then in the Bridge Edit menu > Color Settings choose the color settings you want to synchronize your CC apps to.
ATTENTION Le message contenu dans cet email ainsi que dans tout fichier attaché est destiné exclusivement aux personnes dont le nom figure ci-dessus. Il peut contenir des informations confidentielles ou protégées par le secret professionnel et dont la divulgation est strictement prohibée. Si vous avez reçu cet email par erreur, détruisez-en le contenu. Vous n'êtes pas autorisé, dans cette hypothèse, à copier, distribuer ou conserver ce message. Merci.
WARNING This information in this mail and in any attachments is intended for the above-mentioned addressees only. It may contain privileged or confidential information the review, dissemination or disclosure of which is strictly prohibited. If you have received this email by error, please destroy it. In this case, you are not authorised to disclose, copy, distribute, or retain this message or any part of it. Thank you.

When ever i touch for example appstore it touches safari. i press home button the my phone does what ever it wants, like goes to settings and presses random stuff please help. :(

when ever i touch for example appstore it touches safari. i press home button the my phone does what ever it wants, like goes to settings and presses random stuff please help. :(

Try restarting it. If this does not work, then hard restart it which is holding the power and home button until the product ***** off. If this does not help either, plug it into the computer and restore it. Make sure you back up the device before you restore it though! Here are instructions on how to restore and back up an apple device. http://support.apple.com/kb/ht1414

I am a school administrator. I want to know if anyone knows how to use an ipad wireless hard drive as a storage device for individual student work files that are only accessible to the student or teacher?

I need to use an ipad wireless hard drive as a storage device. I want the student to do work on the iPad , then save it securely on the hard drive, then be able to go back and get the file and continue working on it. Can this be done?

We use google apps for education with the google drive ipad app
The google drive editor is basic. But it meets our needs. Students go to the app called "google drive". They logon and start a document on an iPad and then edit again using almost any device anywhere(home or school): ipad, windows7, mac, android.
We setup each student account with folders for each teacher. Students can move documents into their teacher folder, and then the teacher can edit in real time with the studnet. It's like a multi player editor.
There's no quick fix to allow students using ipads to save work, then revise alone or with the help of a teacher.
You could also use skydrive, dropbox, or filebrowser, but the ability of ipad apps to edit and save revisions is spotty. It depends if that app developer has added support. You can see your MS Word doc files with those tools, but I don't know if you can edit the DOCX file, then save back to DOCX files.

I want to take an image that's from my files, no cropped and be able to set up action(s) where I can drop that image behind an 8x10 frame overlay, then the same with a 5x7 frame overlay, then the same image behind a memory mate overlay that's an 8x10 size

So is there a way to do this using the images right from the camera, where I don't have to crop three different sized images and drag them into the overlays? I can set up an action for each, but cropping the same image 3x is a pain in the ***..!

There are. I did not write you need to learn scripting and write your own scripts. As I wrote most Photoshop will never write a script. However I would write every Photoshop user will at times use a Photoshop script to do some automated process for them.
I wrote the it would be very hard to do what you want to do would a straight Photoshop action. Actions on their own can not use logic. An action would need to to it by brute force.
However in Photoshop CC Adobe added conditional action support. With this support it is now possible to create a group of actions to process some conditions. Like you can separate Landscape from portraits have an Action for processing landscape images and an other for processing portrait images.
Size is still hard to deal with for you can have landscape's the are extremely wide to landscapes that are square and portraits the are extremely narrow to those that are almost square.
Image the extreme aspect ratio will not fill a 8:10 or 5:7 area it resized to 10 and 7 and creating crops the have 8"10 and 5:7 will have images compositions where most of your image content has been discarded.
Camera images do not have extreme aspect ratio the usually have 3:2 or 4:3 aspect ratios there are exceptions. When you have print made the are 5x7 and 8x10 by printers the prints you receive from the printers are center crops from your image files.
It is very easy to make center crops if aree images have the same aspect ratio and orientation to begin with. Now with CC you can have seperate actions to the two orientations.
A general solution would need handle arbitrary aspect ratios the resulting center crop may well not have a satisfactory image composition for source image with extreme aspect ratios.
Photoshop ship with several scripts users use all the time to process their image. You may have used some yourself. Do any of these sound familiar to you. Conditional Mode Change, ContactSheetII, Delete All Empty Layers, Export Layers To Files, ExportColorLookupTables, Fit Image, Flatten All Layer Effects, Flatten All Masks, generate, Image Processor, Layer Comps To Files, Layer Comps To PDF, Lens Correct, Load DICOM, Load Files into Stack, Merge To HDR, Photomerge, Script Events Manager and Statistics.
My action package as I wrote contains more the a dozen script I wrote to be used in actions to add logic into the actions.
It would also be extremely easy to create a Photo Collage Template PSD that contains a background layer that has your two frames the 8x10 and 5x7 and also have two alpha channels to map the locations of the images. That can be batch populated with my script BatchPicturePackage.
Photo Collage Toolkit
Photoshop scripting is powerful and I believe this package demonstrates this A video showing a 5 image collage PSD template being populates with images:
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples

I want a horizontal scrolling series of thumbnails that act as a menu and goes to webpages within my site when clicked

I'm sure it's pretty simple and probably already in the widgets somewhere ..... I just want 4 thumbnails in view at any time with < and > on either side .. when clicked they'll go to a page within my site

You can use the Lightbox widget with a thumbnail strip or any other "image carousel"/ "image slider"/ "filmstrip" widget you may find...
Mylenium

If I download and install free apps it asking for credit card verification. I don't want to give me credit card what to do., If I download and install free apps it asking for credit card verification. I don't want to give me credit card what to do.

All these days all the free apps I am able to purchase without any difficulty. From today I tried downloading free app it's asking for credit card verification even for free app purchase. In the time of creating the account I have selected None option.
I even tried creating a new account but the none option in the card details peace is not available.
You apple iPad support customer care no person is picking the call. 18004250744
Please help me on this issue.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you have one (very important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must use new Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

I want to take a voice memo off my iPhone, put it into iTunes Library and convert it to an .mp3. How do I get the voice memos from my phone? I can't seem to move them out of the Devices folder, no matter how much I try to copy and paste or drag and drop

I want to take a voice memo off my iPhone, turn it into and .mp3, and email it. My iPhone shows up under "Devices" in my iTunes but doesn't allow me to move the voice memo files I see sitting there into my Library no matter how much copying and pasting or dragging and dropping I try to do.
Also, I need to convert the file to an .mp3.
How come no voice memo files show up when I go into my iPhone via My Computer? All it shows are the videos and pictures in the DCIM folder, but not the voice memos. Is there another way to access the voice memos other than through iTunes?

Email it to yourself, then save the file and then see if you can convert it to MP3.

I accidentally took a video when I wanted to take a photo.

I accidentally took a video when I wanted to take a photo. Can anyone explain how to create a still from a video, if that's possible?

On your iPhone you can pause the video at the frame you would like to take a still image and just press the home button and power button at the same time to capture whatever is displayed on the screen.

Want the data store values to be displayed in input field of form

Hi,
I wanted to know wether is there possibility of displaying the data in a input field instead of expression field.
In our model i have used a form which has material type,plant and Vendor connected to data service1 in turn gives the out put in chart and i also have the second input form which has To(0CALMONTH) combo box which is connected to Data service2 and gives the data in table.
But what i wanted is to i also want to use the input fields of first form to second Data service2 and get the data based on on inputs of form1 and form2i.e also To field.
We can connect the port from form1 to DS2 but problem is we need to click the submit of form1 and form2 and it doesnt gives the output according the input of form1 and form2 as it gives the output of that form when we click that submit button.
I have followed help.sap for data tore procdure.
So i have used a datstore where i will store the values of form1 and call it in expression field which i will add and hide it in form2(hide because user should not see that input fields).
Formula used in data store for expression field.
IF(CONTAINS(STORE@matltype,@Material_Type),STORE@matltype,STORE@matltype &(IF(LEN(STORE@matltype)>0,'; ',''))&@Material_Type)
But whats happening is the value is getting concatenated when i goon change the values in input field, so i wanted to get the values to be replaced as soon as i change input field of form1(if use replace function its not working) and also it would be more preferrable if we use input field instead of expression field.
I would also like to know is there any alternate solution for the above requirement instead of datastore.
Thank You
K.Srinivas

Hi,
I have Form1 connected to Data service1 displays the data in a Chart and i have another Form2 connected to Dataservice2 displays the data in table.
In form1 there are Material Type,plant, and Vendor and form2 i have To (0CALMONTH)SO now i want also Form1 inputs for Table which gets teh data from Dataservice2.
What i have said earlier is connecting Form1 to Dataservice doesnt fetch the data correectly,its because if i click submit in form1 i get the data of those 3 inputs and i need to click the submit button in form2 after giving input which shows the data accordingly where it doesnt fulfill the requirement.
So i wanted some solution for that.For that reason i have used the data store and the procedure i have followed the help.sap as i said in my above mesage.
If Data store is also suggestable than i want to display the data in Text input Field instead of Expression field which should replace the previous values as soon as values change in data store.
Hope i have tried to be clear if still it is not i am ready to explain again.
Thank You
K.Srinivas

Want Access Data Grid control in SharePoint 2013?

Hello everyone!
Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
Now, if you try to create a sub site under a publishing site, and use the
Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
error:
The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
Using PowerShell, we can see that both Publishing Portal and
Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
Want to try it out and let me know if that happens to your SharePoint too?

Hi Conway,
I tested the issue in my environment per your description and it returned the results as below:
I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

My 40gb can be played but Itunes says it is corrupt. I want to get the music off the Ipod onto my new computer, old computer died which had all the data on it (crap on my behalf I know) Anyone know how to do this?

My hard drive is corrupt even though I can listen to the music on the Ipod. Itunes says it is corrupt so obviously cannot read it properly. You can hear the disk reader resetting every few seconds preventing the data recovery.
We can see the track listings and playlists which we used for our wedding in 2005 and desperately want them back.
Sadly we lost the hard drive that had Itunes on it with all our music which we dont have a back up of.
Is there anyway it can be repaired and then we get the music off the Ipod and get it back on a new pc....and back it up of course?!!!

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

Special G/L indicator for down payment request F-47

Dear all,
I try to define a new Special G/L indicator for down payment request F-47, and I create it as Special Indicator for down payment/down payment request as Noted item, but the system gives me the error
Special G/L indicator F is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
PLease advice what to do

F-47 is for Vendor down payments.
Have you created your special GL Indicator for Vendors or Customers?
Please check the account type of the Special GL Indicator.
Rgds
Murali. N

I want to take a series of hex characters in a string control and produce an HDLC string indicator for example if the data string control is 3F27 then the HDLC string indicator is 7E003F2700B57E

Similar Messages

Maybe you are looking for