I want to transfer data
i want t transfer data from one notebook to the next how do i do that?
Hi lisaray,
There are many ways to achieve this includng, but not limited to:
1. Burning the data onto CD/DVD media
2. Using a USB flash drive
3. Using an external hard disk
4. Having both Macs on the same network and turning File Sharing on
5. FireWire Target Disk Mode - http://docs.info.apple.com/article.html?artnum=58583
RD
Similar Messages
-
The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.
nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Want to transfer data to another cpu
got a new computer, want to transfer data from this computer to the new one
i proceeded to sync up - created an account (on this computer not the new one) the new computer is asking for the code number from this computer but i am not able to find that - it wants the code number from the new computer - why can't i go back to the beginning - why do i have to write this in a question instead of getting to a person? at 2 in the morning - where am i going to get an answer?Hello - sorry to hear that Firefox Sync is being awkward. It sound like you're at the stage of entering the 12-character 'setup code'. If you have an already set-up Sync account on your '''old''' PC, what's suppose to happen is that you:
* Do 'Set up sync' on your '''new''' PC
* The new PC gives you a 12-character code to enter on your '''old''' PC
* On the old PC, you open the Options window (usually from the Firefox menu), go to the Sync section and click the '''Pair a Device''' link.
* You should see the window to enter the code from your new PC.
You can find more detail, with screen-shots, at [[http://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync|http://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync]].
Hope that helps! -
Want to transfer data from 2 source systems
hi everybody ,
i want to transfer data from 2 source systems into a info cube, how can we do that and i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?Hi
The solution given by Paolo will not work 100% correct.
Even if you create ODS and with record number as key of ODS the data in ODS will be record no 1,2,3,4,5,6,7
But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
Have a look at SDN threads on compounding-
Re: Compounding
Re: Tips on Compounding with Source System ID
Hope it helps
Regards
Pradip
(don't forget points) -
If we want to transfer data to multiple receiver using context object, how
If we want to transfer data to multiple receiver using context object, how many receiver determinations we need to create?
Hi Chiru,
Just go thro' the below links for sending data to multiple receivers:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Conditions in Receiver Determination
I hope this helps.
Regards.
Praveen -
I want to transfer data from my old mac book pro to my new macbook pro
hi Guys,
i purchased a new macbook pro with retins display and i already started using it. Now i want to transfer the old setting and data from my old mac book pro to the new one.
how can i do that, since the message that pops up when the mac is new that gives you options to chose where to transfer files is gone
please helpyes - it's the same as setup assistant which is the one that pops up when you first set up your macbook.
have a look here: http://pondini.org/OSX/Setup.html -
I upgraded from iPhone 4 to iPhone 6. I synced iPhone 4 using a pc windows 8. I want to transfer music etc to iPhone 6. ITunes only recognizes iPhone 4. Any advice?
Create a backup from the iPhone 4 using iTunes and use this backup to restore your iPhone 6 with iTunes.
-
Want to transfer data and sync my iPod touch to a new computer
I have a new computer running Windows 7 and would like to sync my iPod touch to it now instead of my older computer running Windows XP. How can I transfer all my music, playlists, album art, apps, contacts, and other settings from the old machine to the new one? I connected my iPod to the new computer after I installed iTunes on it and got a message saying this iPod was already synced to another computer. I was able to get all the songs that I have purchased on iTunes, but the bulk of my music collection is from CDs that I own. I really don't want to have to import them into iTunes all over again on the new computer. Surely there is a way to transfer everything from one computer to another. Would appreciate being pointed in the right direction.
Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Transfer non-iTunes purchased music by using one of the third-party programs discussed in ths previus discussion:
Best iPod to PC
- Move/copy the iPod backup from the old computer . It is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
- One you move the stuff to the new computer, restore the iPod from backup and sync. -
Want to transfer data via idocs from one R/3 to different R/3
Hi!!
May i hav nay step by step pdf which gives the complete flow of how to transfer idocs from from one R/3 to different R/3.
Though i have the basics steps but some where I m stuck.
Also I have two doubts::
1.Is thr Any relation bw port name and Logical System name?Can they be same.??I hav kept Logical System name as SAPE60 AND PORT name also as SAPE60(in e60) and SAPEI6(in ei6) servers respectively.
2.Should the Logical System names be maintained same in both the servers??
Kindly respond .
Helpful answers will be rewarded points!!!Hi Deepika ,
See the Example scenarios
MASTER DATA TRANSFERMATION BETWEEN 2 DIFF CLIENTS
For this scenario Client 800 is the Sender and 810 is the receiving system
1. Creating Logical Systems
o Login using 800 client
o Go to T. Code SALE
o Expand Sending and Receiving Systems
o Expand Logical Systems
o Click on Define Logical System
o Click on New Entries
o Create STUD_S, STUD_R Logical Systems
o Save and come back
o Assign the STUD_S Logical System to client 800
o Assign the STUD_R Logical System to client 810
2. Creating the RFCs
o Go to T. Code SM59
o Expand R/3 Connections
o Enter RFC Name as STUD_S
o Connection Type as 3
o Language as EN
o Client as 800
o User as SAPUSER
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
o Enter RFC Name as STUD_R
o Connection Type as 3
o Language as EN
o Client as 800
o User as SATISH
o PWD as abap
o Target host as sap
o Click on Remote logon button to test the RFC
3. Creating the Message Type
o Go to T. Code WE81
o Click on change, continue
o Click on New Entries button
o Give message type as ZBAPI_STUD_MAS and description
o Save and back
4. Creating the Segment
o Go to T. Code WE31
o Give segment name as ZBAPI_STUD_SEG
o Enter Short Text
o Enter the Field Name and Data Element in the text boxes
o Save, continue,
o Click on Edit -> Set Release.
5. Creating the Basic IDOC Object
o Go to T. code WE30
o Give obj. name as ZBAPI_STUD_IDOC
o Click on create
o Select create new radio button, give description and continue
o Select the IDOC obj name and click on create button
o Enter the segment name which is create earlier
o Select the check box if you want to make the segment mandatory
o Enter 1 in minimum number 99999 in maximum number, continue
o Save and back
o Click on Edit -> Set Release
6. Creating Customer Distribution Model
o Go to T. Code BD64
o Click on change and Create model view button
o Enter the short text and Technical name as ZSTUDENT
o Select the model and click on Add Message Type Button
o Give the Sender as STUD_S,
o Receiver as STUD_R,
o Message Type as ZBAPI_STUD_MAS
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
o Back to main screen, select the model view
o Click Edit->Model view->Distribute
o Click on continue
o You should get a list saying model view is distributed successfully.
7. Checking the Port
o Go to T. Code WE21
o Expand Transactional RFC
o Find the port from the list which is created using BD64 for STUD_R (Receiving system) RFC Destination.
8. Checking the Partner Profiles.
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner profile STUD_R
o Double click on Message Type ZBAPI_STUD_MAS in Outbound parmtrs.
o Check Receiver Port is assigned correctly
o Check the Basic type as your Basic IDOC object.
9. Assigning the Message Type to Basic IDOC Object
o Go to T. Code WE82
o Click on Change & continue, New Entries button
o Give the Message type as ZBAPI_STUD_MAS
o Give Basic Type as ZBAPI_STUD_IDOC
o Release as 46C
o Save and back
10. Creating Inbound Function Module (Posting Program)
o Go to T. Code SE37
o Create a function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Set the Processing type as Remote Enabled Module and mode as start immed, in Attributes Tab.
o Import Parameters
INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
o Export Parameters
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT
APPLICATION_VARIABLE LIKE BDWF_PARAM-APPL_VAR
IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
o Tables
IDOC_CONTRL LIKE EDIDC
IDOC_DATA LIKE EDIDD
IDOC_STATUS LIKE BDIDOCSTAT
RETURN_VARIABLES LIKE BDWFRETVAR
SERIALIZATION_INFO LIKE BDI_SER
o Exceptions
WRONG_FUNCTION_CALLED
o Source Code
DATA: FIRST_TRANC LIKE MARA_UEB-TRANC,
ZBAPI_STUD_SEG like zbapi_stud.
DATA: ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: I_ZBAPI_STUD LIKE ZBAPI_STUD.
DATA: C_TRUE VALUE 'X'.
DATA: C_FALSE VALUE ' '.
DATA: BEGIN OF T_IDOC_ROLLNO OCCURS 0,
DOCNUM LIKE EDIDC-DOCNUM,
ROLLNO LIKE ZBAPI_STUD-ROLLNO,
END OF T_IDOC_ROLLNO.
DEFINE APPEND_RESFIELDS.
PERFORM APPEND_RES_FIELDS TABLES T_MFIELDRES
T_RES_FIELDS
USING &1
COUNTER-D_IND.
END-OF-DEFINITION.
DATA: I_MARA_UEB LIKE MARA_UEB.
DATA: I_ZSTUD_UEB LIKE ZBAPI_STUD.
DATA: I_MAKT_UEB LIKE MAKT_UEB.
DATA: I_MARC_UEB LIKE MARC_UEB.
DATA: I_MARD_UEB LIKE MARD_UEB.
DATA: I_MFHM_UEB LIKE MFHM_UEB.
DATA: I_MARM_UEB LIKE MARM_UEB.
DATA: I_MEAN_UEB LIKE MEA1_UEB.
DATA: I_MBEW_UEB LIKE MBEW_UEB.
DATA: I_STEU_UEB LIKE STEU_UEB.
DATA: I_STEUMM_UEB LIKE STEUMM_UEB.
DATA: I_MLGN_UEB LIKE MLGN_UEB.
DATA: I_MLGT_UEB LIKE MLGT_UEB. " //br010797 neu zu 4.0
DATA: I_MPGD_UEB LIKE MPGD_UEB.
DATA: I_MPOP_UEB LIKE MPOP_UEB.
DATA: I_MVEG_UEB LIKE MVEG_UEB.
DATA: I_MVEU_UEB LIKE MVEU_UEB.
DATA: I_MVKE_UEB LIKE MVKE_UEB.
DATA: I_MPRW_UEB LIKE MPRW_UEB.
DATA: I_LTX1_UEB LIKE LTX1_UEB.
DATA: HELP_MARC_UEB LIKE MARC_UEB.
DATA: T_MARA_UEB LIKE MARA_UEB OCCURS 0.
DATA: T_MAKT_UEB LIKE MAKT_UEB OCCURS 0.
DATA: T_MARC_UEB LIKE MARC_UEB OCCURS 0.
DATA: T_MARD_UEB LIKE MARD_UEB OCCURS 0.
DATA: T_MFHM_UEB LIKE MFHM_UEB OCCURS 0.
DATA: T_MARM_UEB LIKE MARM_UEB OCCURS 0.
DATA: T_MEAN_UEB LIKE MEA1_UEB OCCURS 0.
DATA: T_MBEW_UEB LIKE MBEW_UEB OCCURS 0.
DATA: T_STEU_UEB LIKE STEU_UEB OCCURS 0.
DATA: T_STEUMM_UEB LIKE STEUMM_UEB OCCURS 0.
DATA: T_MLGN_UEB LIKE MLGN_UEB OCCURS 0.
DATA: T_MLGT_UEB LIKE MLGT_UEB OCCURS 0. " //br010797 neu zu 4.0
DATA: T_MPGD_UEB LIKE MPGD_UEB OCCURS 0.
DATA: T_MPOP_UEB LIKE MPOP_UEB OCCURS 0.
DATA: T_MVEG_UEB LIKE MVEG_UEB OCCURS 0.
DATA: T_MVEU_UEB LIKE MVEU_UEB OCCURS 0.
DATA: T_MVKE_UEB LIKE MVKE_UEB OCCURS 0.
DATA: T_MPRW_UEB LIKE MPRW_UEB OCCURS 0.
DATA: T_LTX1_UEB LIKE LTX1_UEB OCCURS 0.
Internal fields/ tables
DATA: FLAG_ERROR_HAPPENED.
DATA: flag_material_exists. "//br210397 zu 4.0 keine Verwendung mehr
DATA: FLAG_EXIT_TO_BE_DONE.
DATA: HELP_TABIX LIKE SY-TABIX.
DATA: HELP_TRANC LIKE MARA_UEB-TRANC.
DATA: HELP_ALAND LIKE STEU_UEB-ALAND.
DATA: HELP_VKORG LIKE MVKE-VKORG.
DATA: HELP_WERKS LIKE T001W-WERKS.
DATA: HELP_LFDNR LIKE STEU_UEB-LFDNR.
DATA: LAST_MARC_TRANC LIKE MARA_UEB-TRANC.
DATA: LAST_MLGN_TRANC LIKE MARA_UEB-TRANC. " //br010797 neu zu 4.0
DATA: LAST_TEXT_TRANC LIKE MARA_UEB-TRANC.
DATA: CURRENT_TABIX LIKE SY-TABIX.
DATA: GENERAL_SUBRC LIKE SY-SUBRC.
DATA: HELP_FACTOR TYPE P DECIMALS 3.
DATA: USER_SEGMENTS LIKE EDIDD OCCURS 0 WITH HEADER LINE. " insert
DATA: CUST_SEGMENT LIKE EDIDD.
DATA: I_MFIELDRES LIKE MFIELDRES.
DATA: I_MERRDAT LIKE MERRDAT.
DATA: I_EDIDD LIKE EDIDD.
" //br neu zu 3.1g
DATA: T_RES_FIELDS LIKE DELFIELDS OCCURS 0 WITH HEADER LINE.
DATA: T_MFIELDRES LIKE MFIELDRES OCCURS 0.
DATA: T_MERRDAT LIKE MERRDAT OCCURS 0.
DATA: T_EDIDD LIKE EDIDD OCCURS 0.
DATA: BEGIN OF t_matnr OCCURS 0, "//br210397 zu 4.0
matnr LIKE mara-matnr, " wird nicht mehr verwendet
END OF t_matnr. "
DATA: BEGIN OF COUNTER,
TRANC LIKE MARA_UEB-TRANC,
D_IND LIKE MARA_UEB-D_IND,
END OF COUNTER.
DATA: BEGIN OF t_idoc_tranc OCCURS 0, " 4.0
docnum LIKE edidc-docnum, "
tranc LIKE mara_ueb-tranc, "
END OF t_idoc_tranc. "
DATA T_IDOC_TRANC LIKE MATIDOCTRANC OCCURS 0 WITH HEADER LINE."
DATA: FLAG_FITS.
DATA: APPLICATION_SUBRC LIKE SY-SUBRC.
DATA FLAG_MUSS_PRUEFEN LIKE SY-DATAR.
DATA MAX_ERRORS LIKE T130S-ANZUM. " 4.0
note 419281
DATA : FLG_MASS.
CLEAR : FLG_MASS.
FIELD-SYMBOLS: . " 4.0
ALE-distribution unity : IDOC status set by locking "note0361838
data: "note0361838
it_dsp_idocstat like bdidocstat "note0361838
occurs 0 with header line. "note0361838
Initialize data - general
REFRESH T_MFIELDRES.
REFRESH T_IDOC_TRANC.
REFRESH T_IDOC_TRANC. "JH/02.02.98/4.0C KPr100004993
REFRESH t_idoc_tranc_segment. " //br 40 : unnötig
REFRESH matnr_tranc. " -"-
REFRESH t_matnr.
COUNTER-TRANC = 1.
COUNTER-D_IND = 1.
REFRESH T_MARA_UEB.
REFRESH T_MAKT_UEB.
REFRESH T_MARC_UEB.
REFRESH T_MARD_UEB.
REFRESH T_MFHM_UEB.
REFRESH T_MARM_UEB.
REFRESH T_MEAN_UEB.
REFRESH T_MBEW_UEB.
REFRESH T_STEU_UEB.
REFRESH T_STEUMM_UEB.
REFRESH T_MLGN_UEB.
REFRESH T_MLGT_UEB. " //br010797 neu zu 4.0
REFRESH T_MPGD_UEB.
REFRESH T_MPOP_UEB.
REFRESH T_MVEG_UEB.
REFRESH T_MVEU_UEB.
REFRESH T_MVKE_UEB.
REFRESH T_MPRW_UEB.
REFRESH VKORG_ALAND.
REFRESH WERKS_ALAND.
CLEAR APPLICATION_SUBRC.
REFRESH T_MERRDAT.
Check if right function is called
READ TABLE IDOC_CONTRL INDEX 1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
IF IDOC_CONTRL-IDOCTP <> 'ZBAPI_STUD_IDOC'.
RAISE WRONG_FUNCTION_CALLED.
ENDIF.
ENDIF.
LOOP AT IDOC_CONTRL.
Initialize data - per IDOC
t_idoc_tranc-docnum = counter-tranc.
T_IDOC_TRANC-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_TRANC-FIRST_TRANC_IDOC = COUNTER-TRANC + 2.
APPEND T_IDOC_TRANC.
Select segments which belong to IDOC
REFRESH T_EDIDD.
LOOP AT IDOC_DATA WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
APPEND IDOC_DATA TO T_EDIDD.
ENDLOOP.
BUSINESS TRANSACTION EVENT (header / data) "note0388000
call function 'OPEN_FI_PERFORM_MGV00200_E' "note0388000
exporting "note0388000
idoc_header = idoc_contrl "note0388000
FLG_APPEND_STATUS = 'X' "note0388000
tables "note0388000
(DEL) idoc_data = idoc_data "note0388000 note0418561
idoc_data = t_edidd "note0418561
idoc_status = idoc_status "note0388000
exceptions "note0388000
others = 1. "note0388000
if sy-subrc = 1. "note0388000
continue. "note0388000
endif. "note0388000
Within one IDOC: loop through data segments:
Prepare internal tables for the current material
LOOP AT T_EDIDD INTO IDOC_DATA.
Transform from CoreData to Normal Data if necesary
CASE IDOC_DATA-SEGNAM.
WHEN 'E1MARAC'.
*--COMMENTED BY SATISH
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
WHEN 'E1MAKTC'.
PERFORM MOVE_E1MAKTC_TO_E1MAKTM USING IDOC_DATA.
*--COMMENTES ENDED BY SATISH
WHEN 'ZBAPI_STUD_SEG'.
PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
CLEAR I_ZBAPI_STUD.
Second: Move E1MARAC into E1MARAM
I_ZBAPI_STUD = IDOC_DATA-SDATA.
Third: Move E1MARAM back into IDOC-line
IDOC_DATA-SDATA = I_ZBAPI_STUD.
IDOC_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
ENDCASE.
CURRENT_TABIX = SY-TABIX.
COUNTER-D_IND = COUNTER-D_IND + 1.
COUNTER-TRANC = COUNTER-TRANC + 2.
CASE IDOC_DATA-SEGNAM.
WHEN 'ZBAPI_STUD_SEG'.
Initialize data - per material
COUNTER-D_IND = 1.
FIRST_TRANC = COUNTER-TRANC.
interpret segment
ZBAPI_STUD_SEG = IDOC_DATA-SDATA.
MOVE-CORRESPONDING ZBAPI_STUD TO I_ZSTUD_UEB.
T_IDOC_ROLLNO-DOCNUM = IDOC_CONTRL-DOCNUM.
T_IDOC_ROLLNO-ROLLNO = I_ZSTUD_UEB-ROLLNO.
APPEND T_IDOC_ROLLNO.
ENDCASE.
if not ZBAPI_STUD_SEG is initial.
ZBAPI_STUD-MANDT = ZBAPI_STUD_SEG-MANDT.
ZBAPI_STUD-ROLLNO = ZBAPI_STUD_SEG-ROLLNO.
ZBAPI_STUD-FNAME = ZBAPI_STUD_SEG-FNAME.
ZBAPI_STUD-LNAME = ZBAPI_STUD_SEG-LNAME.
INSERT ZBAPI_STUD FROM ZBAPI_STUD_SEG.
COMMIT WORK.
ENDIF.
*-- ALE ditribution unity : update IDOC status "note03618
LOOP AT it_dsp_idocstat. "note036
LOOP AT IDOC_STATUS WHERE DOCNUM = it_dsp_idocstat. "note036
DELETE idoc_status INDEX sy-tabix. "note036
ENDLOOP. "note036
APPEND it_dsp_idocstat TO idoc_status. "note036
ENDLOOP. "note036
*--GENERATING THE IDOC STATUS
PERFORM HANDLE_ERROR_EXT " //br40
TABLES "
IDOC_CONTRL "
IDOC_STATUS "
RETURN_VARIABLES "
T_MERRDAT "
T_IDOC_TRANC "
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING "
GENERAL_SUBRC "
NO_APPLICATION_LOG "
MASSSAVEINFOS "wk/40c
CHANGING "
WORKFLOW_RESULT. "
PERFORM HANDLE_ERROR
TABLES
IDOC_CONTRL
IDOC_STATUS
RETURN_VARIABLES
T_MERRDAT
T_IDOC_ROLLNO "JH/4.0C/KPr100004993
USING
APPLICATION_SUBRC
CHANGING
WORKFLOW_RESULT.
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
DATA: I_MERRDAT LIKE MERRDAT.
IF GENERAL_SUBRC <> 0.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1.
I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3.
I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
LOOP AT T_MERRDAT INTO I_MERRDAT
WHERE MSGTY = 'S' "success
OR MSGTY = 'D' "dummy
OR MSGTY = 'I' "Information " //br011097 zu 3.1I
OR MSGTY = 'H' "dummy " 4.0
OR MSGTY = 'W'. "warning
DELETE T_MERRDAT.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDFUNCTION.
*& Form handle_error_ext
FORM HANDLE_ERROR_EXT
TABLES
IDOC_CONTRL STRUCTURE EDIDC
IDOC_STATUS STRUCTURE BDIDOCSTAT
RETURN_VARIABLES STRUCTURE BDWFRETVAR
T_MERRDAT STRUCTURE MERRDAT
IDOC_TRANC STRUCTURE MATIDOCTRANC
JH/02.02.98/4.0C KPr100004993 (Anfang)
T_IDOC_ROLLNO STRUCTURE T_IDOC_ROLLNO
JH/02.02.98/4.0C KPr100004993 (Ende)
USING
GENERAL_SUBRC LIKE SY-SUBRC
NO_APPLICATION_LOG LIKE SY-DATAR
MASSSAVEINFOS LIKE MASSSAVINF
CHANGING
WORKFLOW_RESULT LIKE BDWF_PARAM-RESULT.
DATA FLAG_ERROR_HAPPENED.
DATA I_MERRDAT LIKE MERRDAT.
DATA IDOC_INDEX_2_SUBRC LIKE SY-SUBRC.
DATA AL_HANDLES TYPE BAL_T_LOGH. "//br99
SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
React on general error
IF GENERAL_SUBRC <> 0.
REFRESH T_MERRDAT.
i_merrdat-tranc = 0. " //br261197
READ TABLE IDOC_TRANC INDEX 1. " zu 40b
I_MERRDAT-TRANC = IDOC_TRANC-FIRST_TRANC_IDOC. "
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGID = SY-MSGID.
I_MERRDAT-MSGNO = SY-MSGNO.
I_MERRDAT-MSGV1 = SY-MSGV1. I_MERRDAT-MSGV2 = SY-MSGV2.
I_MERRDAT-MSGV3 = SY-MSGV3. I_MERRDAT-MSGV4 = SY-MSGV4.
APPEND I_MERRDAT TO T_MERRDAT.
ENDIF.
DATA: C_TRUE,
C_FALSE VALUE 'X'.
If error happened ==> Rollback whole work....
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY NA 'SDHWI'.
EXIT.
ENDLOOP.
IF SY-SUBRC = 0.
FLAG_ERROR_HAPPENED = C_TRUE.
ROLLBACK WORK.
ELSE.
FLAG_ERROR_HAPPENED = C_FALSE.
ENDIF.
Set IDOC status
two cases:
single IDOC-processing: ==> error can be written in IDOC status
package processing ==> anononymous "package error" for all IDOCs
READ TABLE IDOC_CONTRL INDEX 2.
IDOC_INDEX_2_SUBRC = SY-SUBRC.
IF SY-SUBRC = 0.
IF 1 = 2. "//br40
MESSAGE E051(B1). "
ENDIF. "
CLEAR I_MERRDAT.
I_MERRDAT-MSGID = 'B1'.
I_MERRDAT-MSGTY = 'E'.
I_MERRDAT-MSGNO = '051'.
ENDIF.
IF IDOC_INDEX_2_SUBRC NE 0 OR FLAG_ERROR_HAPPENED = C_FALSE.
Nur in diesen Fällen wird Application Log geschrieben
Delete all Successes and Dummy records from t_merrdat
DELETE t_merrdat WHERE msgty = 'S' "success " testweise
OR msgty = 'D'. "dummy "
LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY = 'D'. "
I_MERRDAT-MSGTY = 'S'. "
MODIFY T_MERRDAT FROM I_MERRDAT. "
ENDLOOP. "
ENDIF.
WORKFLOW_RESULT = 0.
LOOP AT IDOC_CONTRL.
Set IDOC status
CLEAR IDOC_STATUS.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF FLAG_ERROR_HAPPENED = C_FALSE.
Application log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
idoc_status-status = '53'. "OK!
APPEND idoc_status.
JH/02.02.98/4.0C KPr100004993 (Anfang)
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
APPEND RETURN_VARIABLES.
Verknüpfungseintrag anlegen
READ TABLE T_IDOC_ROLLNO WITH KEY ROLLNO = IDOC_CONTRL-DOCNUM
BINARY SEARCH.
IF SY-SUBRC = 0.
RETURN_VARIABLES-DOC_NUMBER = T_IDOC_ROLLNO-ROLLNO.
RETURN_VARIABLES-WF_PARAM = 'Appl_Objects'.
APPEND RETURN_VARIABLES.
ENDIF.
JH/02.02.98/4.0C KPr100004993 (Ende)
ELSE.
IF IDOC_INDEX_2_SUBRC NE 0.
Application Log
PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
T_MERRDAT
IDOC_STATUS
USING IDOC_CONTRL
FLAG_ERROR_HAPPENED
NO_APPLICATION_LOG
MASSSAVEINFOS
AL_HANDLES.
ELSE.
IDOC_STATUS-MSGID = I_MERRDAT-MSGID.
IDOC_STATUS-MSGTY = I_MERRDAT-MSGTY.
IDOC_STATUS-MSGNO = I_MERRDAT-MSGNO.
IDOC_STATUS-MSGV1 = I_MERRDAT-MSGV1.
IDOC_STATUS-MSGV2 = I_MERRDAT-MSGV2.
IDOC_STATUS-MSGV3 = I_MERRDAT-MSGV3.
IDOC_STATUS-MSGV4 = I_MERRDAT-MSGV4.
IDOC_STATUS-STATUS = '51'. "ERROR!
APPEND IDOC_STATUS.
ENDIF.
Fill Return variables
CLEAR RETURN_VARIABLES.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
return_variables-wf_param = c_wf_par_processed_idocs.
RETURN_VARIABLES-WF_PARAM = 'Error_IDOCs'.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = 99999.
ENDIF.
APPEND idoc_status.
ENDLOOP.
IF NO_APPLICATION_LOG IS INITIAL.
CALL FUNCTION 'BAL_DB_SAVE' "//br99
EXPORTING
I_IN_UPDATE_TASK = ' '
I_SAVE_ALL = ' '
I_T_LOG_HANDLE = AL_HANDLES.
EXCEPTIONS
LOG_NOT_FOUND = 1
SAVE_NOT_ALLOWED = 2
NUMBERING_ERROR = 3
OTHERS = 4.
CALL FUNCTION 'BAL_GLB_MEMORY_REFRESH' "//br99
EXPORTING
I_AUTHORIZATION =
I_REFRESH_ALL = ' '
I_T_LOGS_TO_BE_REFRESHED = AL_HANDLES.
EXCEPTIONS
NOT_AUTHORIZED = 1
OTHERS = 2
ENDIF.
ENDFORM. " handle_error
Save, check and activate
11. Assigning the Inbound Function Module to Basic Type & Message Type
o Go to T. Code WE57
o Click on change, continue, continue and New Entries Button
o Enter the Module as IDOC_INPUT_ZBAPI_STUD_MAS
o Type as F
o Basic Type as ZBAPI_STUD_IDOC
o Message Type as ZBAPI_STUD_MAS.
o Direction as 2
o Save and back
Now Login in 810 client
12. Assigning the Inbound Function Module in ALE Table
o Go to T. Code BD51
o Click on continue, New Entries button
o Give the Inbound Function Module IDOC_INPUT_ZBAPI_STUD_MAS
o Give Input t. as 0 (zero)
o Save and back
13. Creating Process Code
o Go to T. Code WE42
o Click on Change, New Entries Button
o Give Process Code name as ZSTUD, give Description & Save
o Select Processing with ALE Services Radio button
o Select Processing by Function Module Radio button
o Click the ALE Table (arrow Icon) in Identification
o Give the Function Module Name ZIDOC_INPUT_ZBAPI_STUD_MAS
o Give maximum number of repeats 0
o Save and back, back
o Select the process code from the list & click on Logical Messages Icon
o Give the Message Type as ZBAPI_STUD_MAS
o Save & Back, Save & Back, Save & Back
14. Changing the Customer Distribution model in Receiving system
o Go to T. Code BD64
o Click on change and Create model view button
o Select the model view & click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o Click on Execute
o You should get a list in green color which means it executed successfully.
15. Assigning the Process Code to Message Type in Receiving System
o Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner Profile STUD_S
o Double click on Message Type ZBAPI_STUD_MAS in Inbound parmtrs.
o Give the Process Code as ZSTUD
o Click on Trigger Immediately Radio button
o Save & Back
o Save & Back
16. Creating the Selection Program (Outbound Program)
Login in client 800.
Go to T. Code SE38
Create a Report Program as ZSTUD_SEND with the following code
REPORT ZSTUD_SEND
NO STANDARD PAGE HEADING.
TABLES: ZBAPI_STUD.
DATA: IT_STUD LIKE ZBAPI_STUD OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-H01.
SELECT-OPTIONS: S_ROLLNO FOR ZBAPI_STUD-ROLLNO.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN:BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-H02.
PARAMETERS: P_MESTYP LIKE EDIDC-MESTYP,
P_RCVPRN LIKE TBDLST-LOGSYS.
SELECTION-SCREEN:END OF BLOCK B2.
SELECTION-SCREEN:END OF BLOCK B1.
START-OF-SELECTION.
PERFORM CREATE_STUDENT.
PERFORM CREATE_IDOC.
*& Form CREATE_STUDENT
sending student
FORM CREATE_STUDENT.
SELECT * FROM ZBAPI_STUD
INTO TABLE IT_STUD
WHERE ROLLNO IN S_ROLLNO.
ENDFORM. " CREATE_STUDENT
*& Form CREATE_IDOC
IDOC Creation
FORM CREATE_IDOC.
DATA : IMAS_DATA LIKE EDIDD OCCURS 10 WITH HEADER LINE,
IMAS_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE,
ICOM_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE.
IMAS_CON-RCVPRT = 'LS'.
IMAS_CON-RCVPRN = P_RCVPRN.
IMAS_CON-IDOCTP = 'ZBAPI_STUD_IDOC'.
IMAS_CON-MESTYP = P_MESTYP.
IMAS_CON-DIRECT = 1.
APPEND IMAS_CON.
LOOP AT IT_STUD.
IMAS_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
IMAS_DATA-SDATA = IT_STUD.
APPEND IMAS_DATA.
ENDLOOP.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = IMAS_CON
OBJ_TYPE = ''
CHNUM = ''
TABLES
COMMUNICATION_IDOC_CONTROL = ICOM_CON
MASTER_IDOC_DATA = IMAS_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
LOOP AT ICOM_CON.
WRITE :/ 'IDOC: ', ICOM_CON-DOCNUM, 'CREATED SUCCESSFULLY'.
ENDLOOP.
ENDFORM. " CREATE_IDOC
17. Transferring the student records from 800 to 810 client
Execute Report Program ZSTUD_SEND
Give the Range of Roll Nos to Transfer
Give Message Type as ZBAPI_STUD_MAS
Give Receiver Logical system as STUD_R
Execute
You should get the IDOC Number
Take the IDOC Number and go to T. Code WE05 & Execute
In Outbox you can see the IDOC Status
Select the status record in left side window
Double click on the Status record in right side window
You can see the Control Record, Data Record and Status Records for that IDOC
If the ICON is green and the status code is 3, it means the IDOC is passed to PORT Successfully.
Now Login in 810 client
Go to T. Code WE05 & Execute
You can see the status record in left side window
If the status no is 53 and color is green, it means the IDOC is Posted to Application successfully.
You can see the Log Information by double clicking on the status record in right side window.
Now in left side window, you can see the Control Record, Data Record & Status Record of the IDOC
Now go to T. Code SE16
Give the table name ZBAPI_STUD & press F7
See the contents of the table
The table is updated with the students records transferred from 800 client with our selection program.
Reward if useful
Thanks
Jagadeesh.G -
Hi,
I'm new to iphone. Can you please help me transfer all my contacts, messages, pictures and videos from HTC evo 3d to iphone 5s???Hi, and welcome to the Palm Community Forums.
Once you connect the new TX and press the Hotsync button, you will be given a chance to select your existing Hotsync ID, or create a new one, since the new TX will be a blank slate. Just select your existing Hotsync ID, and away you go.
Now, you *do* have the option of changing each Conduit to Desktop Overwrites Handheld before you Hotsync. This is usually done to troubleshoot problems with corrupted data, but it's also an extra measure of assurance that the desktop data will overwrite the blank data on the handheld. To change your Hotsync Conduit settings, enter the Hotsync Manager by clicking once on the red and blue Hotsync icon in your System Tray at the bottom right corner of your screen (or click Start > Programs > Palm/PalmOne > Hotsync Manager if it's not already running).
Select Custom. Then scroll down the list of Conduits to the one(s) you want to change. They must be changed one at a time, by highlighting the conduit name and selecting Change. In the next dialog box, select the Hotsync action you wish. Then click OK.
Repeat the process for any other Conduits you wish to change. The new settings will affect ONLY the next Hotsync operation...i.e. they will NOT become the new default settings, unless you also click the "Set As Default" box. In this case, you wouldn't want to do that, so just leave the box unchecked.
Good luck.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Want to transfer data from old TX to new TX
I need to move all my data from an old TX to a new one. I am unsure how to do this..... By what I understand all I need to do is hotsynch my new TX to my computer and all the data will transfer over, is this correct? Somewhere I read something about "computer to override handheld" or something like that. What is this, how/where do I access it? I appreciate anyones assistance!
Post relates to: Palm TXHi, and welcome to the Palm Community Forums.
Once you connect the new TX and press the Hotsync button, you will be given a chance to select your existing Hotsync ID, or create a new one, since the new TX will be a blank slate. Just select your existing Hotsync ID, and away you go.
Now, you *do* have the option of changing each Conduit to Desktop Overwrites Handheld before you Hotsync. This is usually done to troubleshoot problems with corrupted data, but it's also an extra measure of assurance that the desktop data will overwrite the blank data on the handheld. To change your Hotsync Conduit settings, enter the Hotsync Manager by clicking once on the red and blue Hotsync icon in your System Tray at the bottom right corner of your screen (or click Start > Programs > Palm/PalmOne > Hotsync Manager if it's not already running).
Select Custom. Then scroll down the list of Conduits to the one(s) you want to change. They must be changed one at a time, by highlighting the conduit name and selecting Change. In the next dialog box, select the Hotsync action you wish. Then click OK.
Repeat the process for any other Conduits you wish to change. The new settings will affect ONLY the next Hotsync operation...i.e. they will NOT become the new default settings, unless you also click the "Set As Default" box. In this case, you wouldn't want to do that, so just leave the box unchecked.
Good luck.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Currently have ipod touch 4 and am getting iphone 5c this weekend. Currently our family has several apple devices and they have the same apple ID for itunes and it is the same ID that we use for icloud. I want to set up a separate icloud ID so that it is only on my new device. I still want to keep the same apple ID for purchases. Can I do this and better yet when do I do this...before the purchase, after the purchase and backing up of data. Where do I go to create a new one?
Figured it out. Thanks.
-
HT201401 i want to transfer data from my computer how do i do it
how do i transfer pictures and music from my computer to my iphone
http://apcmag.com/the-ultimate-iphone-user-guide-how-to-sync-and-transfer-media. htm
otherwise it's also covered in the iphone manual
http://support.apple.com/manuals/ -
I want to transfer datas from administrative user account to guest user account
Hello everyone. I am Biswajit. I am in a real mess. 2 days ago while I was signing in myself to my main account I faced this error
"The User Profile Service service failed the logon.
User Profile cannot be loaded"
After doing a bit research I came to know that I have to make another account to use my PC. I was in safe mode and unfortunately in
case of one account I made 4 accounts. I wanted to delete those accounts. But when I tried that while signing to one of my guest
account, it asked for my administrative account password. I was giving the right password but it was not receiving that. I have some
important document on my desktop of my administrative user account. What will I do for that. Please give some advice.
Or may b I can change my recent guest account to administrative account. I cant do that too.Hi,
The error here means you are using a temporary profile, and here is a KB talking about this error message:
You receive a "The User Profile Service failed the logon” error message
Also here is a similar thread for reference:
I receive error message: The user profile service failed the logon. User profile cannot be
loaded
Hope this may help
Best regards
Michael Shao
TechNet Community Support -
I am a senior citizen on a limited budget. I have hundreds of files of newspaper articles I would like th change to Microsoft Office Word 97-2003. Is there some kind of trial offer I can get for a few days to try the Adobe PDF to Microsoft Word conversion package and make sure it works before I subscribe? Thank you.
Jerry Jackson ([email protected])"I copied them from Paper of Record using Adobe PDF"
Ok, some problems are present with that.
--| There is no such application as "Adobe PDF".
--| PDF is not Adobe's (it is an ISO Standard file format/technology, ISO 32000-1:2008).
--| If all you have is Adobe Reader (any version) then you cannot create PDF.
No version of Adobe Reader can create PDF files, manipulate PDF page content or export PDF page content.
Perhaps the online source already provide PDF files and these were download?
Both Adobe Reader XI and Acrobat XI (Standard and Pro) provide us with a "Select" tool.
IF the PDF's page content is renderable text ("digital" characters rather than an image / picture of characters which is the output of all scanners or "outlined" fonts (which is a vector graphic drawing of the character and not a renderable font) then that renderable text can be copied.
Using the Select tool one selects some rendrable text content then right clicks for the context menu.
On that menu there is the choice of "Copy".
Once copied the content can be pasted into a support application / file.
So, doing this from either Acrobat XI or Adobe Reader XI I can (and have) done a "copy" of renderable textual content in a PDF and then "pasted" same into an MS Word file.
With that said I must admit I am skeptical of what you have harvested being textual content that is actually renderable text (real glyphs derived from real font encoding tables associated with the source file).
Almost always old - old stuff that gets online (in webspace or network space) is the image / picture of the imprint on paper that was scanned (aka "captured"). It may or may not have been OCR'd.
If some organization had folks type in / keyboard in content to a file then, yes, there'd be renderable text.
If what you have is displaying the same layout as the old newspapers then it is 99 44/100 ths of certainty that you have an image, a picture of the old newspaper articles / issues.
If the image / picture of text that is a PDF's content has had OCR applied press Ctrl+A while viewing the PDF.
If many "boxes" of blue appear you have OCR output.
If one big blueish box over the whole page appears you do not have OCR output present.
If you have OCR output then you have the "characters".
These can be exported. These can have copy and paste performed.
BUT no picture / image of text has "styles", "format", "layout", etc. -- it is a picture eh.
So, you get recognized characters. It will not be 100% (an "m" might be recognized as "n~")
Once you have the OCR output characters in Word or whatever you must engage in cleanup.
Please note the MS Word is most decidely not a page layout application so any rework to get a Word file to resemble the layout of a newspaper is problematic.
Keep in mind that back in the day what got to become the printed imprint on paper for any newspaper, etc always came from a manually laid out setup. No InDesign, etc back then.
Be well....
Maybe you are looking for
-
How can I see my software update history?
Hi guys I just wonder how can I see my system software update history? on Lion we can see in Preferences/Sofware Updates/History but Mountain Lion we dont see to same place?
-
Hi Couple of questions related to DVM : 1. Can we load the values to DVM from some data base table , i have to create a huge DVM which has values in DB table. 2. Is there any caching that we can set for DVM so that the DVM is loaded just once and not
-
Ref Char fpr item descrption in BOM
Hi All I want to change the item description in BOM through variant configuration (reference character ). The scenario is in sales order i will be entering the size (lenght and width) this two char should reflect or change the item descrption of the
-
How can i conect my Wii with my iPhone 4
how can I connect my Wii to the Internet using my iPhone 4?
-
Mail on iOS keeps opening in icloud
hi. I have 3 accounts synced to both my iPad and iPhone - GMail/Work/iCloud. I rarely use my icloud email on either ipad or iphone even though I have it synced on both. When I close the mail.app on either device I never leave it positioned in the ic