I want to uninstall the version of TB that I just downloaded and installed.

I liked the more simple version of Thunderbird and would like to get it back. I am getting so frustrated that I may deinstall period.

''plfk [[#question-1042752|said]]''
<blockquote>
I liked the more simple version of Thunderbird and would like to get it back. I am getting so frustrated that I may deinstall period.
</blockquote>
I was using a very old version; perhaps 2.something. It was so simple, this is so cluttered. If I could get back to the 3. whatever that is no longer supported, I would be happy. I never needed support, don't know why I didn't ignore the message to update today.

Similar Messages

I just downloaded and installed the 64bit itunes, but I get an error 2 "Apple application support required to run Itunes, uninstall and install again" I did that twice and got the same result

I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.

Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit).

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

I bought a Mac PowerBook in 2008. It came with InDesign CS3. I did not use it. My computer was stolen in 2014. I had backed up the hard drive. I reinstalled on my new Mac laptop. I want to use the CS3 now. It will not download or install. What do I do?

I bought a Mac PowerBook in 2008. It came with InDesign CS3. I did not use it. My computer was stolen in 2014. I had backed up the hard drive. I reinstalled on my new Mac laptop. I want to use the CS3 now. It will not download or install. What do I do?

From where are you trying to download it?

I found information on how to transfer my library to a new computer. I am going to use an external hard drive for this and transfer my itunes folder to the new computer. I will then download and install a new version of itunes on my new computer. My q

I found information on how to transfer my itunes library to a new computer. I am going to use an external hard drive for this to transfer my itunes folder to the new computer.
I will then download and install a new version of itunes on my new computer.
My question is this. When I do this, will itunes have all my album artwork for all my library? My library has a lot of my own music and I have spent quite a bit of time copying album artwork that itunes did not add. I am really hoping I don't have to do this again!
Thanks for your help!

If you follow the directions in this Link...
Copy iTunes to an External Drive
http://support.apple.com/kb/HT1751
Everything should be carried across...

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards.

I have an older 13" macbook with snow leopard, I want to upgrade to the newest mountain lion, can i just purchase and instal?

I have an older 13" macbook with snow leopard, I want to upgrade to the newest mountain lion, can i just purchase and instal?

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.

I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks

Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a ver

Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a very common problem. Any help would be appreciated. Thanks.

Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?

I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?

Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

TS3212 I just got a warning that the Itunes 10.6 that I just downloaded could impare or disable my XP system, could someone please tell me why? I have not upgraded from XP due to several reasons and now I don't know what to do. I had Itunes before on my c

I just got a warning that the Itunes that I just downloaded (10.6) could impare or destablize my system- I have had Itunes on my computer before but when I plugged in my Ipod it told me I needed to uninstall Itunes and reinstall itunes all together. Now I don't know what to do. I have a Sony computer that runs on Windows XP and then I have an Ipad, Iphone, and Ipod that I sync everything with What do I do? Do I continue installing? And, if I don't install how will I ever get all my "gadgets" to work properly without being able to download Itunes 10.6? Need Help!!!! I'm not very tech savey...just a grandmother who loves her gadgets:)

What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

When i try and open the auto cad Lt that i just downloaded i get this error The directory may be locked by another process or have been set Read Only. Directory: '/Users/hockaday' Please correct this problem and press OK to exit the application.

i get this error why i try and open the auto cad that i just downloaded
The directory may be locked by another process or have been set Read Only.
Directory: '/Users/hockaday'
Please correct this problem and press OK to exit the application.

I did install it in the admin account. Actually the computer has four accounts, one for my husband, where I installed it. One for me which also is set to admin, one is called TEST and has nothing in it and one is guest user.
I don't know how AutoCad is interfacing with the account. That is why I am not sure what to do about it. I read other threads in various places and some seemed to point to something having to do with having multiple users. The solutions were not clear. I was hoping someone else had this problem and could tell me what to do. I tried apple support but no help. I have not tried AutoCad yet as I assumed they wont help since this is a free educational version of their product.

I am getting "Error in accessing iTunes store. Please try again later." Error 0x80092013. I have just downloaded and installed current version of iTunes, and have the 2013 Norton IS. My proxy server is letting me got to iTunes, but cannot login.

I have a proxy server and the server is allowing me to go to iTunes. But I get a message "Error in accessing iTunes store. Please try again later." Error code ox80092013. I cannot find that code in the troubleshooting section. I have just installed a new PC HP5750, with Norton IS 2013. I installed the current version of iTunes directly from the iTunes site. My proxy server is American Family Online web browsing filter. I contacted them and they said there should not be a problem with their server. I have had an account previously, but has been inactive for several months. I even tried to create a new account, but still got the same error code.
Someone please help with this. I have accompaniment tracks on iTunes that I need for music ministry.

Hi Lcoffin8,
Thanks for visiting Apple Support Communities.
See this article for additional information and steps that can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

I want to uninstall the version of TB that I just downloaded and installed.

Similar Messages

Maybe you are looking for