I want to update enhancement category in ECC6 for Z-Table

Hi,
I am working in Upgrade project from 4.5B to ECC6. In Ecc6 I want to update Enhancement category for Z-Table but this facility is not avilable in 4.5B.
Unless updating enhancement category for Z-Table then it is throughing runtime error.
But Z-Table has some datas. My question is if update enhancement category and save and activate this Z-Table then is there any problem affect to that table data.
Or any other problem will be arised ?
Waiting for quick response.
Best Regards,
Padhy

Not to Worry Dear.. enhancement catagory is like u want urr table to be enhanceable (i.e the no of fields can be increase , decrease or edited)
so its just an catagory setting or configuration like do you want to allow others to change fields setting in your table.
so actual proble may occur when u add, remove or edit fields list. (ofcourse when you have made it enhanceable)
so if there is possability of data truncation then u will get error and you have to go to SE14 for Table adjustment
No Rewards Plz..

Similar Messages

I have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

i have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
This one comes close:
The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

Can any one please send me an update trigger (pl/sql procedure) for ap tables(ap_suppliers,ap_supplier_site_all,and contacts)

Please send an query for update trigger for those tables .
     1: ap_suppliers
     2: ap_supplier_sites_all
     3: ap_supplier_contacts.
Thanks,
Chaitanya.

Hi,
Actually ID and Data are different names in my API. Here I mentioned like that.
Am using Oracle 10g version.
Yes I am going to get the multiple values using this Ref Cursor. The same ref cursor is used in another API of my package.
In this API, the user actually enters Application_id and data. API should insert/update the version_master table with the inputs. See application_id is the foriegn key for app_master table.
The requirement is whenever they enters application_id and data, if application_id already present in the version_master table, then the data should be updated and we should get a status flag for this using Out variable(i.e. using ref cursor only we are showing the status). if the application_id is not present in the version_master table, new record should be inserted. The sequence will generate the version_id for version_master table.
But the Merge statement is working fine for update and insert also. Problem is am unable to see the success or failure through ref cursor. I don't know how exactly I can use this.
If data is NULL the operation should be failed. i.e. I should get Failure status here. But am not getting this.
Please remove the comments here and then check. If I use the NVL2 function I was able to get the status flag, i.e. S or F.
OPEN resultset_o FOR
SELECT NVL2 (data, 'S', 'F')
FROM version_master
WHERE application_id = application_id_i;
1.How the value of data being not null will determine Success of the api and how null failure
2.If the above select statement goes in to exception when others how I will no the failure
I have to achieve the above scenarios.
Please advice me.

I want the message types and basic types for catsdb table

i want the message types and basic types for catsdb table

Hi Jagrut,
Message Class is "LR".
<b>Reward points, if helpful.</b>
Regards,
Atin

I want to update Acrobat 9 to 11 for our firm.

It seems on our firm volume account there are two licenses, and they serve the whole firm. I wonder if I buy two upgrades will also be enough. I know some other products, like InDesign, one license only allows installation on 2 machines.
Thanks.

Volume licenses must be upgraded with volume licenses. Contact your reseller or the Adobe volume licensing team.
Mylenium

How to Update Product category in bidder data of business Partner

Hi Experts,
I am new at SRM,
While Doing Supplier Registration i am creating Bidder and Business Partner Using these two bapi
'BBP_CREATE_ORGANIZATION
BBP_CREATE_CONTACT_PERSON
Now i also want to update Product Category , that should be display on
Procurement -> Business partner -> Bidder -> select bidder - > Bidder data
Please tel me any fuction module can be used
Thanks & Regards
Prashant Gupta

Hi Prashant,
Please share the solution.
I am having the same problem.
thank you
Tumelo

I have a big problem :( why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help :( i want to update it now

i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now

Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Table Enhancement Category during upgrade from 4.7 to ECC 6.0

When our sandbox was upgraded from 4.7 to ECC 6.0, Basis had the ABAP developers change the Enhancement Category on about 400 tables, some of which were custom tables. The enhancement category was previously u2018not classifiedu2019 on these tables.
Is this really necessary? Has anyone not changed the enhancement categories on tables that were flagged during the upgrade? Also, what happens if we select the wrong enhancement category?

Jane,
This is what SAP says,
Short Text
Enhancement Category Selection
Definition
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the category cannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself.

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

Update Condition Category field in KONV table

hello Folks,
I have a requiremnt to update the Condition Category of KONV table .. I don't want to use direct table update
I have used the below Bapi's but nothing is working
1>BAPI_SALESORDER_CHANGE and got the message
Manual changes to condition type is not permitted
2>SD_SALES_CONDITION_MAINTAIN
3>SD_SALES_ITEM_COND_MAINTAIN
Please let me know if any FM is there to update the same.
Your help is highly appreciated.
Regards,
Raj

Make use of the following functionModule to add,delete and update
CALL FUNCTION 'KONV_UPDATE'
EXPORTING
PI_UPDKZ = PI_UPDKZ
TABLES
PI_T_KONV = WA_KONV .
PI_UPDKZ = 'D' (Delete) ,'I' (Insert) ,'U' (Update)

My iPod isn't recognized by iTunes and I want to update it but I can't. What do I do?

I plug in my iPod and it will charge but I have tried everything to get iTunes to recognize it and it won't. I want to update it to IOS 5 but I need the iTunes to connect with it.

Have you tried here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I have Win7Pro64, tried to Un-Install Firefox control panel, no luck, tried running helper.exe from Uninstall folder and it says "Not a Valid Win-32 Application" What gives?? Just want to update to 3.6.4 and that didn't work either so I'm trying to remove

Running Win7Pro64. Tried to update to 3.6.4 and it failed. It said to download the whole program so I did. Tried to install and says that the "License File" is missing. SO I go to un-install 3.6.3 myslef with Control Panel. All that did was remove Firefox as a listed program in control panel, all of it is still there in Explorer and it runs fine. So I go to use Helper.Exe under the Uninstall folder of Mozilla Firefox and when I click that, it says "Not a Valid Win-32 Application" What's up with that?? All I want to do is remove 3.6.3 so that I can clean install 3.6.4. I tried installing 3.6.4 two different ways with failures both times. I tried to remove 3.6.3 using two different ways, and that also failed both times.
== This happened ==
Just once or twice
== I tried updating to 3.6.4. It failed both with the update and the full download, so tried to un-install 3.6.3 in control panel, then helper.exe with no luck.

You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/

Want to update data in a view based on multiple tables

Hi
I am facing a problem i want to update data in tables using a view. As that view is based on multiple tables so i am unable to update data. i came to know we can update table from view only if view is based on single table. so if anyone knows any alternative please let me know.
Thanx
Devinder

Devinder,
The table can be updated through a view based on multiple tables, if and only if the table is a "key preserved" table. Rather than explaining myself, i avoided the burden of typing by finding the material in Oracle Docs and pasting it for you :-)
If you want a join view to be updatable, all of the following conditions must be
true:
1. The DML statement must affect only one table underlying the join.
2. For an INSERT statement, the view must not be created WITH CHECK
OPTION, and all columns into which values are inserted must come from a
key-preserved table. A key-preserved table in one for which every primary
key or unique key value in the base table is also unique in the join view.
3. For an UPDATE statement, all columns updated must be extracted from a
key-preserved table. If the view was created WITH CHECK OPTION, join
columns and columns taken from tables that are referenced more than once
in the view must be shielded from UPDATE.
4. For a DELETE statement, the join can have one and only one key-preserved
table. That table can appear more than once in the join, unless the view was
created WITH CHECK OPTION.
HTH
Naveen

I want to update to LION,on my Macbook Pro duo core, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.

I want to update to LION,on my Macbook Pro CORE 2 DUO, (october 2006) because Adobe CC needs at least that. I know my computer is old, but works perfect to me and I do not want to stay in Adobe CS6 since I have access to Adobe Cloud CC. Please help.
I probably dont want to go to Mountain Lion either because I've heard that it will slow down my computer, So, Lion 10.7 will be the perfect OS X for me.
I have ne newest release of Snow Leopard installed and works great.
Thank you ALL for your help.

you will be ok updating to the new software but there will be some trade off. i have 3 macbooks 2006 that are all running the latest versions.
some of the trade off are
1-2 less of battery life
slow wake ups from sleep
slower start up time about 30-40 seconds longer then what you have now
the operating system will use high % of your processer while idealing
these are not the things you want to hear about a new os compared to the old one but this is how it is even with a new macbook pro. but it's not the end of the world. just make sure you have at least more then 2GB of ram and have a good harddrive and you will be ok.

Why is my app in the app store is all need to purchase with visa and such other things? As a example i wanted to update the clash of clan apps, but it keep saying that i have to do a billing thing. Please help me.

Im currently new to this iphone. Im using iphone 5s with a version iOS 7.1.1. My problem is what is wrong with my app store? It keep telling me to update my billing method. Was all apps in the app store is need to be purchase. Such as i wanted to update my clash of clan game. It keep telling me to fill in my billing method. I already fill in the billing method, but it say that "There is a billing problem with a previous purchase. Please update you payment method. " i don't know why he keep telling me this even though in my visa card got money. Please help me with this problem

This is incorrect. "There is a billing problem with a previous purchase. Please update you payment method. " means you have made a purchase and iTunes/Apple hasn't received the finds for it yet. hence the "There is a billing problem with a previous purchase. Please update you payment method. ". This means you would need to either use an iTunes gift card to pay it off or another debit or credit card that is currently on the account.

I want to update enhancement category in ECC6 for Z-Table

Similar Messages

Maybe you are looking for