I want to upgrade RAM Macbook pro 2.4 quad , can i put 16 GB or only 8 GB as recommended?

i want to upgrade RAM Macbook pro 2.4 quad , can i put 16 GB or only 8 GB as recommended?

No problems, go ahead, I'm doing it too, when the price for 16GB  comes down a wee bit more.

Similar Messages

  • I want to upgrade my MacBook pro ram

    I want to upgrade my MacBook pro 17'' ram. I have 2X2 GB 1066 MHz and I want to go to 2X4GB but I can't find any with 1066 MHz I found only 1333 MHz. Will it work on my MacBook pro late 2009 unibody 3,06 Ghz Core 2 Duo

    do not use anything other than the exact specs.
    It MAY work with the 1333MHz (the 1333 will be downclocked) but you will have problems VERY probably.
    You have to replace the 2X2 with 2X4.
    Buy the best there is: Crucial, OWC: the price is very low. And yes the right spec is for sale everywhere.
    Find a respectable internet seller in your area, and buy it: but research the Crucial and/or OWC sites for the exact specification, they have configurators where you put in your computer model.
    Replacing is easy, you have to have the right screwdriver, there are 3 screws that are longer, remember where they are.

  • I want to upgrade my macbook pro's ram from 4 to 6 or 8gb. mine is mid 2010 macbook pro..

    i want to upgrade my macbook pro's ram from 4 to 6 or 8gb. mine is mid 2010 macbook pro..
    Configuration
    2.4GHz Intel Core 2 Duo
    4GB 1066MHz DDR3 SDRAM - 2x2GB
    250GB Serial ATA Drive @ 5400 rpm
    i am looking at
    http://www.flipkart.com/transcend-ddr3-4-gb-laptop-ram-jm1333ksn-4g/p/itmd2ryprr bhv7qg
    will i have any problem like compatibility??
    thank you.

    A Mid 2010 MacBook Pro supports 16 GB of memory without any problem. Macs are "special" about memory because some brands work without any problem and others don't work. That's why I recommend you to buy the memory from OWC or Crucial in order to make sure that you get compatible memory > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

  • I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

    I want to upgrade my macbook pro 15-inch i7 2.3GHz memory and I want to know what is the maximum RAM it could take

    Welcome to Apple Support Communities
    It looks like you have got an Early 2011 or newer MacBook Pro, so you can use 16 GB of RAM. You can buy more RAM at OWC or Crucial. Remember that you cannot upgrade RAM in MacBooks Pro with Retina display
    In case you have got a Mid 2010 MacBook Pro, you can only install 8 GB of RAM

  • I want to upgrade my macbook pro mid 2010's ram

    I want to upgrade my macbook pro's ram to 8gb's I don't want to spend $200 on ram from apple, i Know that with buying it from apple, if it doesnt work they will do it for you, and it guranteed to work, i just don't have the money to do that.
    they outlined how to do it here http://support.apple.com/kb/HT1270#link1
    and i found some memmory here
    http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=2F9CE069A5CA7304
    I am confident in my computer knowledge that I can install ram in a mac, i've done it to dozens of pc's
    so what i'm looking for is reassurance before I do anything thank you

    There should no problem in installing 8 GB RAM in your MBP.  Crucial is one of the best sources of RAM for Macs.  Now if you are so inclined, you can install 16 GB from OWC, the other reliable source for Mac RAM.
    blog.macsales.com/16353-owc-announces-maxram-memory-upgrades-to-16gb-for-2010-ma c-mini-macbook-and-macbook-pro
    Ciao.

  • I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?

    I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Sudden Motion Sensor:
      State:          Enabled

    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)

  • I downloaded Mountain Lion onto my iMac.  Now i want to upgrade my Macbook Pro (10.7.5) to Mountain Lion.  Do i need to purchase another download?

    I downloaded Mountain Lion onto my iMac.  Now i want to upgrade my Macbook Pro (10.7.5) to Mountain Lion.  Do i need to purchase another download?

    One purchase is sufficient if both computers are owned by you and the ML version was purchased as an upgrade.
    How to install Lion or Mountain Lion on multiple computers - http://support.apple.com/kb/HT4854

  • Upgrading Ram Macbook Pro 2012 13"Crucial RAM

    Hello,
    I am looking at buying Crucial ram for my 2012 Macbook Pro 13". At the moment it is 4gb and I want to upgrade to 8. I am looking at the crucial ram as it is much cheaper than the Apple ram. Is there any disadvatage in this? Or is it better to stick with Apple?
    Thanks

    I always buy Crucial: I've put their RAM in at least 12 Macs and never once had any problems.
    I have 16 GB of theirs in my 2012 MacBook Pro.
    The only disadvantage to not using Apple's RAM is that Apple will blame the third-party RAM if you get a hardware fault. So keep hold of your old RAM so that you can replace it for testing purposes, if needed.

  • Vram HD4000 before upgrade ram macbook pro

    Hello! Today I upgraded the ram in my macbook pro 15 "late 2012 (i7 2.3 ghz) bringing it to 16GB. Ram is Samsung 1600MHz. Vram I have noticed, however, that the HD4000 is not increased to 768MB (as it should be 4gb ram = 386mb vram, 8gb ram = 512mb vram; 16gb = 768MB vram.) What can I do about this "problem" does anyone know anything? (sitema is the mountain lion aggornato latest version).
    Thank you.

    The video memory (Vram) on any Intel integrated graphics is dynamic meaning that the amount allocated is dependant on  :
    The amount of total memory installed in the machine ie 2Mb, 4Mb etc
    The program being used and how graphically demanding it is.
    Thus the machine will allocate anything from 64 Mb upto 768Mb, you as the user can not normally change this.
    (This is the same for Windows machines with Intel graphics)
    Custom mini.

  • Black screen after upgrading ram (macbook pro late 2007)

    Dear Community,
    I am willing to donate 100 USD to anyone who is willing/able to provide concrete resolution to this problem.
    I am a professional freelance videoeditor and my job is currently stucked due to inability to boot my macbook pro again.
    After upgrading the RAM of my MBP (late 2007 model, 17'' display, Intel 2.4GHz Dual Core processor), the screen went black and the system did not boot any more.
    I tried to replace the orginal 2 x 1GB DDR2 533 CL=5 SODIMM (single rank) with 2  X 2GB DDR2 800 CL=6 SODIMM (dual ranks).
    After the memory upgrade, the system was restarted, I heard a short beep, but the macbook showed a black screen instead of booting properly. The mainboard was powered, the fan was moving. I saw a green led turned on on the center of one side of the macbook.
    I tried to mount the previuos 2 x 1GB DRAM SODIMMs, but nothing happened. The system keeps not booting even with the original memory.
    I tried already several procedures suggested by the user manual, related to SMC Intel controller reset (with battery and without battery and charger), but those were not effective in restoring the normal operation of the macbook. The system keeps not booting with exactly similar issues (black screen, fan on, short beep after power-on, green LED on).
    I also tried to swap the memory DIMMs into the memory sockets. I tried to use a different combination with 1 NEW 2GB and 1 OLD 1GB  DIMM. But the problem is still there with similar sympthoms.
    DOES ANYONE HAVE ANY CLUE OF HOW TO SOLVE THIS?

    My best guess is that you have fried the RAM with static electricity charged up in your body. According to OGELTHORPE a beep on startup is because of no RAM, if when installing you did not do it correctly, you could have fried the RAM, which then your mac will not recognize it. The same with the old RAM, if you tried to re-install it and didn't pull up your sleeve and rest your arm on the inside of the chassis, then it is fried, or if you didn't wear an ESD band and connect it to the the chassis, then it is fried.
    Seen as though you can't startup your mac, I can't say to do an AHT, buy some new ram, and start with the lowest one you can, so its cheap for ya use a different company incase is that;) Crucial.com is really good, I got an 8gb upgrade from 2gb. Let me tell you, it's great!
    Reply back;)
    Chris

  • I want to upgrade my macbook pro with new mac pro (2011).any ideas?

    i want to upgrade my mid 2010 mac pro with the latest one. what i need to do for this?

    there is no new 2011 Mac Pro other than new firmware to enable Lion only.
    you can upgrade the processor easily if it is a single socket to W3680 for mere $619
    If you are not talking workstations you're in wrong forums.

  • Want to upgrade my macbook pro 15" late 2011 ram to 16 gb

    Hello, I'm looking to upgrade my MBP (late 2011, 15") memory ram from 4 gb to 16 gb and i'll like to know which are the best brands recommended. I've seen the specs in my laptop and it should be 1333 mhz ddr3 for the ram.
    Thank you!

    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    Brand is not relevant. The vendor is. I recommend:
    OWC
    DataMem
    Crucial.com

  • My friend needs to upgrade her Macbook Pro OS X but can't get into her internet. I would like to download the update but would need to use my password. Is this possible or should I just wait for her password?

    My friend needs to upgrade to Yosemite but her network is faulty. I told her I would upgrade for her on my network. I don't have her Apple password at this time so I thought I would use mine. Is it possible to use my password and ID for this download?

    She gave me her ID so everything is going as it should. That's what I thought but in a moment of wait I thought I would ask.
    Many thanks,

  • Want to upgrade from 4mg RAM to 8mg RAM MacBook Pro mid 2012

    I want to upgrade my MacBook Pro (13" mid 2012, 2.5GHz, Intel Core i5) from 4mg RAM to 8mg RAM. Running Mavericks. Any suggestions on which brand name RAM I should consider?
    Do I need to go to an Apple Store to get my RAM put in (quite far for me) or is it okay to go to a place like Future Shop or Best Buy? Should I attempt it myself?
    I found this thread:
    http://support.apple.com/kb/ht1270

    2 sticks is the norm. Crutial is recommened because it is known to work properly, as well as having support. I have read of instances of problems with other suppliers. Try pricing it from Apple.
    Read the links below.
    Memory finfer
    http://www.crucial.com/store/advisor.aspx?gclid=CLi06vrw0roCFc-Y4Aod-3UArg&ef_id =UlhXeAAAAckYrG5v:20131107142706:s
    Results
    http://www.crucial.com/store/listparts.aspx?model=MacBook%20Pro%20(13-inch%20and %2015-inch%2C%20Mid%202012))
    Your machine capacity:

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

Maybe you are looking for

  • HT4528 My screen on my iphone 4 is not working.

    My screen on my iphone 4 is not working. Even after I plug it up to Itunes it still doesn't work.  What should I do?  Is it a hardware issue?  My phone is not under warranty anymore.

  • Need focus in JTextArea

    Hai Friends, I am on the way of developing a QUERY ANALYSER. Mean while i got a problem. in my product I am using two JTabbedPanes(1 & 2). In TabbedPane1 i have a text area (to write the query) and the tabbedpane2 on which two panes( one for dispayin

  • Imac keeps shutting down - is this a power supply issue

    Dear all. Help would be much appreciated. my imac G5 has recently started shutting down by itself - always about 1 minute after starting up... I have seen a few suggestions to reset the PRAM and the power switch - both of which I have done to no avai

  • Transfer rules sourse system assignment change

    Hi, XAD -- Global APO system AAD -- America APO system GBD - Global BW system ABD - America BW syste, I transported, TR,Comm STru, UR from XAD to AAD In XAD TR,Comm Str,UR pointed to GBD, where as now i need TR,Comm Str,UR to point to ABD when i doub

  • Problem Modifying ALV Field Catalog

    Hi, One grid of my ALV report displays material numbers as 0100.2000. But when I use method FILE_SAVE_DIALOG to save ALV report to Excel, the material number changes to 100.2. I have tried modifying my field catalog as shown at end of this message, b