I want to use 2 screens on a mac mini, which cable di have to buy extra

I want to buy the mac mini but i am not sure what extra cable to use to work with 2 screens from Dell.(DVI).

You need to purchase an min-display port to DVI adopter.
The Mini comes with an HDMI to DVI adopter.

Similar Messages

  • I have CS5 for my laptop and want to use it on my Mac too. Do I need to buy a separate license?

    I purchased CS5 for my laptop and now want to use it on my Mac book too. Do I need to buy a separate license?

    Serial numbers are platform specific. You cannot use a PC license on Mac and vice versa. You would need to run a platform swap to use it on a Mac and upgrade to CS6, but then would lose the PC license. Therefore you eitehr need to buy a separate license for the Mac or join Creative Cloud.
    Mylenium

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

  • I used to have iPod shuffle connect to PC, I now want to use it on my Mac - how can I now assign iPod to Mac

    I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go.  How can I now assign iPod to Mac?

    You can do a platform swap
    Order product | Platform, language swap

  • Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

    hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
    Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
    Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
    Please provide me the early solutions.
    Regards,
    Suresh.

    Hi, try this first...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?

    Hi screen name,
    Adobe PDF printer gets installed when you install Acrobat 10 Pro.
    To use this printer you need to purchase Acrobat. Once the trial period is over you cannot use the printer to create pdf files.
    An alternative way for you is to utilize Microsoft's own inbuilt pdf engine.
    You can simply open the file and select 'Save as' and in the type list select 'pdf'
    Please refer : http://office.microsoft.com/en-in/excel-help/save-as-pdf-HA010354239.aspx
    Regards,
    Rave

  • My user account doesnt show up when turned on, just a gray screen on my Mac mini.

    My user account doesnt show up when turned on, just a gray screen on my Mac mini.  Please help.  I have lots of unsaved data on it. 

    Gello, see if this works...
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.

  • Can I use my iMac with Mac mini?

    Can I use my iMac (PowerPC G5 2.1 GHz, Build 9L31a, Serial # W855104UTAR, VERSION 10.5.8) as a monitor with new Mac mini.
    If yes, how to do it?

    Qalaska wrote:
    Can I use my iMac (PowerPC G5 2.1 GHz, Build 9L31a, Serial # W855104UTAR, VERSION 10.5.8) as a monitor with new Mac mini.
    If yes, how to do it?
    YES!
    You either must use a monitor to initially set up the Mac Mini, or use Target Mode to boot into its hard disk, and create these settings, but:
    You turn on Screen Sharing in the Sharing panel in System Preferences in the Mac Mini.  In my case I also give my Mac Mini a fixed IP with DHCP with Manual Address in the Network panel.
    Then you boot your iMac and in the Finder in the GO menu to Connect to Server... and enter: "vnc://192.168.0.148" but replace 192.168.0.148 with your Manual Address for your Mac Mini.   You log in with your name and password for the Mac Mini and your Mac Mini will now appear in its own window.
    Go to Full Screen and now you can running your Mac Mini with your iMac's keyboard, mouse and monitor.
    I have been using my mid-2011 Mac Mini in this fashion since I purchased it. 
    As a backup, I have an HDMI cable connected from my Mac Mini to my HDTV to allow for "monitor viewing" when and if needed.
    I have an older Mac Mini running Snow Leopard as part of my home entertainment center, and with its own IP, I also control it in this fashion without a monitor (although I can "view" it on my HDTV through its component video input, when needed).
    This is known as a "headless" mac mini. 
    In my case, instead of an iMac, I use my MacBook Pro.

  • I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use..

    I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use.

    I would just leave them in Word...GR reads many formats very easily.
    If our goal is to work on/edit the files it may be useful to look into something like Pages if you have a Mac, and the Pages for iOS devices so you could use the same word processor on both machines.
    But if you convert the Word to PDF and then use GR you can still edit the files...GR will edit and annotated PDF files rather easily.

  • Can I use 2007 CinemaDisplay with Mac mini

    do I need to purchase adaptor, which one? How do I determine which connector type in 2007 CinemaDispaly (HDMI or DVI)?

    Qalaska wrote:
    Can I use my iMac (PowerPC G5 2.1 GHz, Build 9L31a, Serial # W855104UTAR, VERSION 10.5.8) as a monitor with new Mac mini.
    If yes, how to do it?
    YES!
    You either must use a monitor to initially set up the Mac Mini, or use Target Mode to boot into its hard disk, and create these settings, but:
    You turn on Screen Sharing in the Sharing panel in System Preferences in the Mac Mini.  In my case I also give my Mac Mini a fixed IP with DHCP with Manual Address in the Network panel.
    Then you boot your iMac and in the Finder in the GO menu to Connect to Server... and enter: "vnc://192.168.0.148" but replace 192.168.0.148 with your Manual Address for your Mac Mini.   You log in with your name and password for the Mac Mini and your Mac Mini will now appear in its own window.
    Go to Full Screen and now you can running your Mac Mini with your iMac's keyboard, mouse and monitor.
    I have been using my mid-2011 Mac Mini in this fashion since I purchased it. 
    As a backup, I have an HDMI cable connected from my Mac Mini to my HDTV to allow for "monitor viewing" when and if needed.
    I have an older Mac Mini running Snow Leopard as part of my home entertainment center, and with its own IP, I also control it in this fashion without a monitor (although I can "view" it on my HDTV through its component video input, when needed).
    This is known as a "headless" mac mini. 
    In my case, instead of an iMac, I use my MacBook Pro.

  • Screen Needed for mac mini as file server?

    I have two pb I want to network together through a mac mini. Do I need a display for the mac mini to run as a "file server"? I'm new at networking, and I want a place where I can share files with other co-workers w/out using more space on either of our computers. Any help is welcome. Thank you.

    The first response you received in this thread was spot on...I just want to add another option to consider.
    You can find very inexpensive, network-capable external enclosures on the web (check out dealnews.com). Just toss in a good-sized hard drive (the last 320GB I bought from newegg.com was $115)...hook up one of those enclosures...and boom, you have NAS (Network Attached Storage). No computer to update or support...just simple, effective, and fast network file storage.

  • I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.  I've been unable to locate an app that will do this.

    I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
    I've been unable to locate an app that will do this.  The Photos app that comes with the phone or iPad has extremely limited duration controls.  PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
    iPhoto for iPad is getting some terrible recent reviews.  I tried a couple other free apps but they don't use Airplay.
    I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV.  I've thought the iPad or iPhone would be a lower profile controller.
    Am I out of luck?

    Thanks for your help.  Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV.  I guess I'm just stuck with using iPhoto on my MB Air.  Thanks again.
    paul

  • I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

    I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

    lewbobber wrote:
    Basically i need to either take it to a shop that can unlock i.e. £40.00
    Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
    Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
    Good luck.

  • What display do you use with your 2005 Mac mini?

    Hi all,
    I was wondering which displays people are using with their 2005 Mac minis and
    which (if any) adapters are necessary?
    Thanks!
    Mike

    I'm using a Magnavox 15" LCD TV via it's VGA input on my day one mini. The original 2005 minis have a full sized normal DVI output and came with a DVI to VGA adapter. If yours no longer has that, it's the only adapter you'd need for most common computer monitors. Many newer monitors come with DVI already, so no adapter would be needed.

  • I have Pages in my IPad, can I use this software in Mac Mini?

    I have Pages in my IPad, can I use this software in Mac Mini?

    Two different Operating Systems and Two different processors in the hardware.
    Peter

Maybe you are looking for

  • Calling oracle function in OMB script

    Hi Can anyone please tell me how can i get the returned value of an oracle function in OMB script. or how can i get the value into OMB variable and use it. Basically i want to set the properties of OWB mapping via OMB script. Following OMB code sets

  • Reading Xml file using File Adapter

    Hi I have added a file adapter to my process to read out a emp.xml from the location C:\inputDir. Also i have added transformation activity to map the variables. But the problem is iam not able read the values from emp.xml;File adpater giving me as e

  • Image in nested sequence does not let me export my project

    Hello, Here's my issue: In my Premiere project, I have a "Master" sequence in which I have normal a/v files and two nested sequences, for the video intro and ending. The problem is with the nested intro sequence, which is composed of several images t

  • Set quotation not editable in webUI

    Hi all,     i want to find ways to set quotation not editable in webUI according to quotation no when push EDIT button not SAVE button.     Is there any BADI to achieve this (i can get quotation no in the BADI) ?

  • How to upload the image after Cropping or rotation

    i have developed the applet for image rotation and cropping at the client side.i am able to do the all operation at client side but my problem is to how upload those file to server.please any one help me regarding this issue because i am new to java