I want to use a customized photoshop button with my composition and have rollover effect

I'm trying to place a photoshop button into a blank composition widget trigger. When I cut a paste the image into the trigger it looses its fuctionality and no longer switches colors during rollover. It works fine in the lightbox composition, but the problem with lightbox composition is that it does not have rollover options to display the target only click. How do I get around this problem. I want to have my own customized button with the composition effect within muse cc.

You should check the design layout and states defined for the trigger , if the state is defined properly then it should show the rollover state, but the target container corresponding to the trigger is on the page then it would show you the active state not the rollover state.
Thanks,
Sanjit

Similar Messages

  • Can I use home sharing for AppleTV with Time Capsule and have my iMac powered off?

    I wish to be able to use AppleTV without having my iMac powered on.  Is there a way to have my iTunes library on my Time Capsule so I can use AppleTV directly from it?

    I use an external hard drive with my iMac and have an iTunes folder there (that sometimes it points to automatically, but sometimes I have to go under advanced and show the iMac to use that iTunes folder because it defaults to the internal iTunes folder on the computer).
    Make sure the external drive is powered on and mounted on the desktop before launching iTunes.

  • I have installed a trial of Adobe illustrator on my macbook pro. I want to trace an image using the custom trace button but can't. Does anyone have any ideas how I could custom trace?

    I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
    I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
    Does anyone have any ideas how I could custom trace?

    It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?

  • How can I change to location of pictures folder? I want to use a backup hardrive to store my photos and music on but still want to be able to go to the finder and click the photos/music button. How can I do this.

    I want to use a backup hardrive to store my photos and music on but still want to be able to go to the finder and click the photos/music button. In windows i would just change the properties of the given library folder. How can I do this in Lion?

    Move "~/Pictures", or if just iPhoto pictures, "~/Pictures/iPhoto Library", to the new location.
    If you moved iPhoto, open iPhoto with the option key held, like Tony T1 writes. Select "Other Library" and navigate to the new location.
    To add the new location to the sidebar in Finder, just drag it onto the sidebar.
    Same process for iTunes, or whole music folder.

  • I want to use the free photoshop trial which I thought I was downloading but have adobe assistant??!

    I want to use the free photoshop trial which I thought I was downloading but have adobe assistant??!

    You can initiate a download of the install files for Photoshop CS6 within the Adobe Download Assistant.  Once you sign in you can select the product you wish to download from the bottom portion of the screen.

  • Photoshop buttons with tranparent background display in IE 7 & 8 with a Black background

    I added Photoshop buttons to my website and they display fine in IE 9, but when I tested it on Windows XP using IE 8 and on Windows Server 2003 using IE 7 these Photoshop buttons showed up with black background where it should have been transparent.
    As a workaround I created a background in my PSD files to match the background of the website. However, this is not ideal because changing the website background in the future is now going to require editing all of the PSD buttons again.
    The other strange thing I notices is that when I had these buttons originally in the header of a Horizontal Menu Widget they worked fine on IE 7 and 8. I'm not sure why when I remove them from the widget the background shows up black.
    This definitely appears to be a BUG and hopefully Adobe can resolve it quickly.
    Let me know if anyone else has experienced this problem and how you fixed it.

    I do agree that it is probably related to the browser.  However, that does not explain why the same images display fine if they are in a horizontal menu widget.  It would seem that if they display one in a Muse website they should work anywhere in the site. Obviously that is not the case and must have something to do with the way a widget embeds the image.  I don't have an explain online since I already fixed the problem by removing the transparent background and matching the background color of the website in the photoshop PSD file.
    If you want to see an example of what the site looks like know you can go here.  http://www.itouchandlearn.com/toddler-puzzles.html the buttons that I had a problem with are the App icons accross the top. 
    I originally had everything on a single page nesting the different app pages within the horizontal menu widget, but because everything was on one page it took to long to load.  To fix this problem I created new pages for each widget menu tab and moved everything out of the menu widget.  This is when the transparent background became a problem.

  • I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad

    I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad....
    Please Help me.
    I want to make a numpad of my own from which i can set the text but i want the user to tap in between the text..

    You seem to stop the while loop to run the following code, then the program ends. Are you running this using the "continuous run" button????
    You need one big while loop containing the acquisition, then you build up the history data in a shift register. Clicking "save" will save the data, but not stop the loop.
    Why did you place a time-control in the FOR loop??? This is just post-processing so it should just do it without any delays. I don't understand the logic in the FOR loop. You are appending arrays, but then you delete the first element at each iteraction constantly trimming data from the beginning of the appended array. Then you autoindex at the output tunnel heavily duplicating all data. Ths make s no sense!
    Can you explain how you want you data saved?
    Message Edited by altenbach on 12-16-2005 11:20 AM
    LabVIEW Champion . Do more with less code and in less time .

  • I want to sell my Canon EOS 6D with bundled Lightroom and Elements. May the purchaser use the bundle

    I want to sell my Canon EOS 6D with bundled Lightroom and Premiere Elements. May the purchusar use the bundled software?

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

    I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
    My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
    For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
    Help me.

    Hello Sam R.,
    The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
    I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
    Basically, yes. the command button inside the control should updates both label and textbox.
    If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert. 
    I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and     

  • Get option back - "I want to use a work email account with a BlackBerry Enterprise Server"

    Hello,
    I have a Virgin Mobile USA blackberry.  When I go into the Setup Wizard - Email setup the only option I get is "I want to create or add and email address". 
    How do I get the other option that says "I want to use a work email account with a BlackBerry Enterprise Server" back?  This option was there before I activated the phone but is gone now.  No email accounts have been setup yet.
    I am trying to use this phone with a work account.  I have my Enterpise Activation Password but I have no place to enter it.
    Thanks
    Scott
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Have you tried here:
    Homescreen > Options > Advanced Options > Enterprise Activation
    scott852 wrote:
     This option was there before I activated the phone but is gone now.  No email accounts have been setup yet.
    Given this, I suspect actually that your account, from your carrier, does not include BES. If the above mentioned item is not in your menus, then that would likely confirm this. I suggest you contact your carrier to ensure you have a BES-level account from them.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

  • HT5361 When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose "  button is gone. What have I done wrong?

    When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose "  button is gone. What have I done wrong?

    Hi Liz,
    Sorry to hear you are having a similar problem.  Last night I went to the tool bar at the top of iphoto, clicked on "File",  then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups  opened the iphoto pages in the Time Machine.  I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked  "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1).  I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do. 
    The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu,  when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.  
    I am now a happy camper. 
    I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto,  that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"? 
    Good luck Liz,  if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
    Karen

  • Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

    Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet. 

    Yes you can.  All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

  • TS1702 I no longer want to use the Pandora one app with automatic renewal how do I quit it so it stops charging my credit card??

    I no longer want to use the Pandora one app with automatic renewal how do I quit it so it stops charging my credit card??

    http://support.apple.com/kb/ht1918
    http://support.apple.com/kb/ts5366

  • I have not used my CC photoshop in over 30 days and it will not open

    I have not used my CC photoshop in over 30 days and it will not open

    Is it a trial version or have you paid for it?

Maybe you are looking for

  • Alert message in tool area with hyperlink to forum/km

    Hi all, I'm looking for informations about the tool area customization located in the framework. I've read that we could publish a message in the header about information or important notifications, but I did not found any hint  over ther internet no

  • Can field type be changed once I have set it up?

    I am working on a form and one of the fields is supposed to be a drop down menu with about 50 different choices (choose 1). I accidentally set it up as a list box instead of a combo box. Is there any way to change this field to a combo box, keeping a

  • Using the AutoText Feature: An easy way to generate Digital Signatures

    One feature I find particularly useful is "AutoText". Using this, you can assign a keystroke combination to effectively generate a word, phrase or sentence while typing messages on your blackberry. This is a great tool, particularly for multiple digi

  • Can't print test results as "user"

    Hi, I have a program  written in Labview 6.1 by another developer. This program runs on a PC with Windows 2000 ver. 5.0 Bld 2195 SP 3. Even though this is a stand alone test station and cannot ever be connected to the internet, we have McAfee virus p

  • JDeveloper 11.1.1.2.0 - Help text at field level

    Hi, We are making use of the Help.properties file to produce field level text. I have field's such as the following <af:inputText value="#{bindings.DocumentName.inputValue}"                                 label="#{bindings.DocumentName.inputValue eq