I want to use a pre-assigned filename to save a PNG file

I have checked out the report writer for saving a front panel screen and it is more than I need. How do I take a number that the user has already entered into the vi and use that for a filename to save a bmp of the front panel to a directory?
Solved!
Go to Solution.

What method are you using? Print to RTF will make a handy Word-ready picture. See attached.
Richard
Attachments:
print to rtf.jpg ‏15 KB

Similar Messages

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L

I have a 4K monitor and want to see a full screen slideshow using the jpeg generated when I "save" a raw file in the raw converter.

I have a 4K monitor (actually a 50 inch Samsung TV). Looking at my daily photographs on this monitor is astonishing, wonderful, etc. but there is one fly in the ointment so to speak. With previous monitors when I selected slideshow I could get a full screen "fit or fill" slideshow that I used for grading my images. My initial work flow all happens in Bridge and Camera Raw. It goes like this: I download my raw files using Bridge. In the thumbnail view I delete all the obviously bad images. Then using Bridge I open each raw file using my preferred presets for sharping and such. If I like the image I "Save" it to the same folder as a full sized maximum quality JPEG.
Now we get to the part that doesn't work. At this point I usually start a full screen slideshow and rate each of the JPEGs I have saved. What I see is a 1920 x 1080 preview image blown up to full screen size which of course looks awful. Why can't I just view a slightly reduced JPEG image created on the fly by Bridge. I guess I could tell Bridge to create 3840 x 2160 previews and they would display correctly, but that would be a big hit on disk space.
When I run slideshow using the 1080 pixel preview, I can click on the preview I click on the displayed image and start a full resolution slideshow of the saved JPEGs but the outer edges of the image are not viewable because the image has not been reduced to fit on the monitor screen.
Does anyone know how I can get Bridge to show a full screen slideshow using the saved JPEGs?

Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

I want to use one property for firstname but save in one form 5 firstname .

how can I save 5 firstname in one h:form using one property
<h:form>
<h:inputText id ="firstname" value ="#{bean.firstname}">
<h:inputText id ="firstname1" value ="#{bean.firstname}">
<h:inputText id ="firstname2" value ="#{bean.firstname}">
<h:inputText id ="firstname3" value ="#{bean.firstname}">
<h:commandButton id="save" action="#{bean.save}" value="Save" />

Hi,
I tried out this...
But now I am getting following exception
javax.servlet.ServletException: Base is null: .optionalCover
javax.faces.webapp.FacesServlet.service(FacesServlet.java:154)
ManageBean code
public String[] getOptionalCover() {
public String getOptionalCover(int i) {
public void setOptionalCover(int coverId, String values) {
Jsp code
<h:inputText value="#{homeCoverViewBean.optionalCover[420]}" />
<h:inputText value="#{homeCoverViewBean.optionalCover[500]}" />
<h:commandButton value="Save" action="#{homeCoverViewBean.saveAndNext}" />
Please suggest.

Use a Pre-Paid Card then Credit Card

I searched the board before publishing, but didn't find a clear answer, so I will ask here.
I set up an iTunes account with a credit card because I assumed that was the only way to get an account.
I eventually I plan to use the credit card to buy individual songs. But before I start using the credit card, I want to use my Pre-Paid Gift Card first.
My question, is there a way to use up my gift card first (just to buy songs) then start using my credit card once I run out of funds on the credit card?
Separate question - is there a way to set up the account where I can not use a credit card and only use a pre-paid gift card? (this would be for added protection against credit card fraud)
Thanks.

jkhitunes wrote:
Wonder why an Apple person told me this would work??
Apple should read this stuff once in a while.
Some prepaid cards appear to act as credit cards to the merchant. If yours is one of them it should work, but debit cards are not accepted for the iTunes Store.
Can you use a pre-paid credit card from Wal-Mart?
Do you mean an iTunes Card, the kind sold at Wal-Mart? Sure, that will work.
"Pre-paid" and "credit" are mutually exclusive.
I believe this way of thinking about it ought to be valid: if you need a PIN code, the card won't work.
I don't use debit cards so I can't be certain if this will apply consistently, but let me know if that makes sense.

Which SCs are needed if I want to use KM related API in webdynpro

Hi Gurus,
I am using NWDI based development, i want to using KM api in webdynpro application. in the application, file will be uploaded using webdynpro fileupload component and stored in KM. I have read some tutorial and known which jars are needs. but I don't know which software component these jars belong to. I want to add that software component as dependent SC in my software component where my application resides.
Any comment is appreciated.
Best regards,
John

Hi,
I was searching for the com.sap.security.api to be used in my NWDI project ... any idea in which DC I can find that library?
Best regards,
Martin

How to use sdk to get the image in the pdf file created by illustrator?

I have some pdf files create by illustrator and saved as pdf documents,
now I want to use the sdk to get the image in pdf files.
how to?
Thanks.

Thank you first!
Yes,you are right,since I am new to illustrator,and I want to try to write a plugin,
I have read the sdk doc and API and opened the sample in vs2010,but no idea about how to operate the pdf doc in illustrator with api.
Hope more advise or any examples,thank a lot.

I used to have iPod shuffle connect to PC, I now want to use it on my Mac - how can I now assign iPod to Mac

I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go. How can I now assign iPod to Mac?

You can do a platform swap
Order product | Platform, language swap

Want to use telstra bigpond mobile wi-fi 4g as a pre-paid after finished 2 year contract

I have finished a 2 year contract and post paid plan on a Netgear aircard 760s and want to use it as a pre-paid but have been told it will not work with a pre-paid sim card. But looking up your websit for pre-paid mobile modems and it is included in the list of modems. Can I use a pre paid sim card in it or not?

If it is a BigPond plan you had then it will not work correctly if at all as the 'BigPond devices will only work on the Telstra network and with a BigPond plan', if it was a Telstra plan then it would work as these are a normal phone service.
Easiest way to tell them apart is on your bill a BigPond one will have an email address, a Telstra one will have a mobile number... otherwise the main difference is that the BigPond one is shaped/slowed and the Telstra one has excess data.
You can in theory have the BigPond ones unlocked to work with Pre-Paid however as their firmware is optimised for the BigPond service it may still not work correctly.

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

Kisight:- If I Don't Have or Want to Use My iSight What Can I Use ?

kisight:- If I Don't Have or Want to Use My iSight What Can I Use ?
Or What Cameras are available for Macs ?
This question used to come up for Macs that did not have Internal Cameras and the User did not have an External iSight.
Since the advent of Intel Mac and the Internal iSight and OS 10.4.9 (late Tiger) the question has broadened from "What can I use with iChat ?" to "What cameras can I use with My Mac ?" and from there into the current Question this User Tip plans to answer.
On the whole it is a case of matching a camera for the type of application you are going to use it most with.
A web cam can be used in iMovie to create Email or Video Blogs although Camcorders do a better job. Camcorders can be used as web cams.
Camera Types
These fall into three main categories that themselves have subsets.
Your choice is going to be influenced by the Applications you want to use it with.
1) Firewire Cameras (Plug an Play)
a) The iSight (External) made by Apple and several other similar cameras have mostly disappeared off the market. (Although iSights seem to be still doing well on Ebay - See Version and Mounts).
b) Firewire Camcorders. These vary as to which apps that work with dues to the different Signal outputs they can do.
Apple Article TA26556 Highlights some that have issues due to their proprietary DV Format.
2) USB 1.1 able Cameras. (Not Plug and Play)
This includes most cameras pre Vista (more on that later)
Most of these will need a suitable Mac Driver either from the Manufacturer or from one of two Generic sources (macam and IOXeperts). Some manufacturers will include a Mac Driver on the CD that comes with the camera some will supply it as a download from their Site.
It is worth while saying at this point that iChat will also need this reasonably cheap iUSBCam Utility as well.
This Utility was originally designed for getting the External iSight to work on computers less than the G3/600Mghz spec for iChat. Then it included the ability to get USB cameras to work with iChat.
You will need one of these three options listed so far if you are OS 10.4.8 or below or have only USB 1.1 ports/sockets on your Mac.
3) USB 2.0 Cameras. (Plug and Play in most cases)
a) Those that are UVC (USB Video Class) Compliant (Also listed as Vista Certified)
Apple added a UVC driver to the OS at 10.4.9 but your Mac also has to have an USB 2.0 port that you can plug such a camera into (Some keyboard ports are not USB 2.0). This means that the camera is Plug and Play although it may not have all the features it has on a PC
b) Those that are USB 2.0 but are not Vista Certified/UVC compliant. (You are going to need Mac Drivers again)
This site about Apple Compatible cameras may be of some help.
A Note on quality of Pictures.
Firewire cameras of either sort are best with Camcorders being the best of all. (Generally more pixels delivered faster to your Computer)
The Newer USB 2.0 cameras are tending to exceed the 640 X 480 pixels that earlier USB1.1 cameras use with some currently giving 1.3Mp resolutions. It should be noted though that not all applications will use this format.
Look closely at the maximum Frame rate (fps) a camera can produce. You may not get it is every applications but something that starts with a max of 15fps is going to give you no leeway.
Applications
You may get some more insight into what to go for by asking in one of these forums:-
iSight Discussions,
iChat AV Discussions for iChat 3 and iChat 2 and Earlier,
iChat and iChat Sharing (in Leopard)
and iMovie Discussions
Please Note:- some of these are Category Links and you have to select a forum within the list at the top of the linked page.
<hr>
Versions and Mounts Which Version Am I Buying ?
First off I will not say so much on Buying a second hand External iSight other than making sure you use a reputable Selling site or an Individual Seller so that you have recourse if the device turns out to be faulty. Try and get to see the camera working if you can, preferably seeing it plugged in and working or by iChat and seeing the Pic it produces (Get the person to show you live Screen shots (or Screen Share in Leopard/iChat 4) of System Preferences > Sound > Input as the iSight will be listed)
What I will list here is info about the different versions.
There were three versions before the External iSight was discontinued. There is little outward differences as the main change is the mounts that are included with each version. They all function the same way.
The versions are distinguished by letters (Revision A, B or C) in addition to the base part number and an added slash (M8817LL/).The Last model included different mounts for Laptops, Desktop Stand, Magnetic mount and one for a Flat Panel iMac (the Lampshade one). See pictures in this PDF on page 6.
Apple no Longer sell the External iSight or the Apple M9314G/B iSight Accessory Kit either but you may find it at other places as well if the mount you want/need does not come with the camera. Pics of Box and Contents
It appears that individual iSight mounts and other items can be purchased though this iSight Service FAQ page
Remember the youngest External iSight is likely to be at least 4 years old. Current anecdotal information suggests the cost of an Apple Repair to a faulty External iSight exceeds the cost of a USB Replacement (Or the value in real terms, of the camera itself - although higher prices seem to be quoted on Ebay and Amazon)
First Draft
10:08 PM Sunday; May 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Thanks Nubz
I will review further an correct myself.
The last reads the way I meant as in physically getting to see it.
I am not sure you are reading it the same way.
As a consequence your suggestion seems a bit ambiguous to my mind.
Thanks for the input. I will read a digest context a bit more and see if I can rephrase.
8:12 PM Thursday; May 21, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I want to use my Macbook Air 2011 as an external disk for my iMac 2011. I connected the two with a Thunderbolt cable and when starting the MacBook Air I pressed "T" and it worked except with Office documents. Can anybody help?

I want to use my MacBook Air as an external disk to my iMac. I talked to Apple care and we solved it by connecting a Thunderbolt cable between the two computers. I then turn on the MacBook Air while pressing the "T" and it works. I can sit and work on my iMac and grab/change/save the files that are in my MacBook Air EXCEPT for the Microsoft Office files. I called Microsoft and they can't solve it. They say it might be a problem with the Thunderbolt cable. Has anybody have this problem?
Both computers are 2011 and they both have Office 2011.
Thanks in advance,
Alejandra

For Word it says "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)"
For Excel it says "the file could not be found. Check te spelling of the filename, and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure hat the file has not been renamed, moved or deleted.
I tried this with many different documents, and I always get the same message.

I have a new account and I want to use the reward points

hi
I just created a new account on Toshiba and deleted the older
the old account: (radumuresan) http://forums.computers.toshiba-europe.com/forums/profile.jspa?userID=538172580
the new one: (akhenaton) http://forums.computers.toshiba-europe.com/forums/profile.jspa?userID=538318254
I did that because I couldn't post on a thread ( http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22110 ) and I thought that it is a problem with my account
now I want to use my 10 reward points (which were not used with the previous account - "radumuresan"), and also, if possible, to transfer (add to the current account - "akhenaton") the 3 reward points earned; it's annoying - my new account ("akhenaton") has no "Reward Points to Assign" (from the beginning) even though I haven't used the 10 reward points in my old account :|
I, also, would like to thank moderator if he/she contacted Toshiba technicians in the problem regarding the XD-bit ( http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19857 )
I had no chance to do this before the thread was closed (I only got to thank Toshiba Support Team as I was very anxious to run some tests on my "shiny new laptop" with the new BIOS update; later when I tried to edit my post the thread was already closed)
thank you!
L.E.: now the 10 "Reward Points to Assign" just appeared on my account; 10x (but I still don't see the 3 earned points added too)
Message was edited by: akhenaton

Hi akhenaton. I am writing a bit off topic, but there i have an opportunity to write you something, because both topics, where you adviced me, are now closed.
I was trying to write you something in the topic about the RAM modules, where you reacted and answer my question. This topic is already closed, so i am not able to add there any post. I just wanted to say you thanks :) I have also problems posting the message in topic about NVIDIA GeForce GO 7600, it wrote me the same, that it has to be approved by moderator or something like that. So i waited for some time and the post finally apeeared the next day. I don't know, when the post has to be approved by moderator and when it is posted automatically. And something about reward points, I think, that you have 10 reward points at your disposal in every topic you created, don't you? Greetings.

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

Why does Firefox 7 freeze when I paste a filename when printing to a file using Microsoft XPS Document Writer?

This is more of a bug, and it doesn't seem to happen all the time.
I like printing web pages to Microsoft XPS Document Writer (.xps) format. FF7 seems to freeze often when I paste a filename (usually from copying something, like the title, from the web page itself) after trying to print to a file using Microsoft XPS Document Writer. I think it may be that I wind up copying some special formatting (or maybe a line break) and that causes FF to freeze (I then have to force-close it using Task Manager). Just a bug that I hope the developers will note and fix.
Another question, not quite related to the above, but is there a way to save an html web page to save only the text stuff? When I save to Text File in Firefox, I usually wind up with all the html crap in it too, when I just wanted the text content portion. TIA.

Can you undo the system restore?
Note that using System Restore can cause your Firefox installation to get corrupted because not all files are restored (only files in a white-list), so be cautious with using System Restore.
*You may lose data in the Firefox profile folder like .js and .ini files pr profiles.ini can be affected.
*You may need to (re)install software that was affected.
In case you need to reinstall Firefox then you need to delete the Firefox program folder before reinstalling to make sure that all files get replaced.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I want to use a pre-assigned filename to save a PNG file

Similar Messages

Maybe you are looking for