I want to use acces point air sap1602i e k9 first times i need default ip adress

hi
i want to use acces point air sap1602i e k9 first times i need default ip adress to setup
it is possible if not give me please solution

Hello fouadissam,
You can connect to the AP with a console cable and enter show ip interface brief, which will display the ip address.
If its connected to a network you can log into your switch and enter show arp | i xxxx.xxxx.xxxx(mac address of the AP).
The below link points to a configuration guide that may be helpful.
http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/15_2_4_JB/configuration/guide/scg15_2_4_JB3a.pdf
Hope this helps,
Please remember to rate helpful posts.
Thanks.

Similar Messages

I want to use my Macbook Air 2011 as an external disk for my iMac 2011. I connected the two with a Thunderbolt cable and when starting the MacBook Air I pressed "T" and it worked except with Office documents. Can anybody help?

I want to use my MacBook Air as an external disk to my iMac. I talked to Apple care and we solved it by connecting a Thunderbolt cable between the two computers. I then turn on the MacBook Air while pressing the "T" and it works. I can sit and work on my iMac and grab/change/save the files that are in my MacBook Air EXCEPT for the Microsoft Office files. I called Microsoft and they can't solve it. They say it might be a problem with the Thunderbolt cable. Has anybody have this problem?
Both computers are 2011 and they both have Office 2011.
Thanks in advance,
Alejandra

For Word it says "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)"
For Excel it says "the file could not be found. Check te spelling of the filename, and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure hat the file has not been renamed, moved or deleted.
I tried this with many different documents, and I always get the same message.

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

I agree with Kappy.. passing files and especially via wireless is slow as slow.
Just need to be sure your TC is the new AC model??
And the OS on the computer is Lion?
Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
Give us the full picture of the network.
Then we can help you get into it.. whether you should put your files on it is another question.

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

HT201250 Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller ext

Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in and if so, do I really need all the old backups on my smaller external drive?

50maz wrote:
Hi, I hope this question won't seem too basic but if I want to use a new larger external drive for my time machine backups, will it do a new full backup the first time I plug it in
Yes, it will do a full backup.
and if so, do I really need all the old backups on my smaller external drive?
Only if you want to be able to go back in time to those previous Time Machine backups. When you plug in the new larger external drive, you will only be able to go back as far as the first day you plugged it in and ran the first Time Machine backup on it.

I recently wanted to update my phone and so when i put it in recovery mode and tried to set it up it said that i had to enter the apple id that i used to set up the phone the first time but i dont know the information to my old account what do i do?

I recently wanted to update my phone and so when i put it in recovery mode and tried to set it up it said that i had to enter the apple id that i used to set up the phone the first time but i dont know the information to my old account what can i do?

You will need to remember or find the id that you used, without it you won't be able to re-activate your phone - if you are on the activation screen then does that show the first letter of the id and the email provider's name ?
Do you know if you have any of the account's downloads in computer's iTunes library - if you do then you can get the id form that : Recovering a forgotten iTunes Store account name.
If not then see if you can find it via http://appleid.apple.com : Apple ID: How to find your Apple ID.

HT5934 How can I disable the lock screen option. I do not want to punch in a multi-digit security code every time I need to use the phone

How can I disable the lock screen option? I do not want to punch in a multi-digit security code every time I need to use the phone.

System Preferences - Security & Privacy - unselect the box called Disable automatic login

I created a slide show on work computer. Placed photos and movies in Media Browser. Want to use another computer (laptop) to give presentation. Do I need to copy media browser to laptop or are pictures and movies embedded in slide show and can go anywhere

I created a slide show on my work computer and placed many photos and movies in my work computer's Media Browser. Want to use another computer (laptop) to give the presentation and therefore change location of slide show. Do I need to copy the media browser to the laptop or once the pictures and movies are embedded in the original slide show, can I take it anywhere and not worry about the media browser?
I also want to optimize a movie for Keynote, so it's not too large a file. Please help.

Graphic, sound and video files are copied into the Keynote file, but make sure Keynote > Preferences - include sound and movies check box is ticked.
If you have added additional fonts they will need be changed to reflect what is on the destination machine.
If the other machine has a different Keynote version, ensure the same transitions and effects are available.

Airport express: use internet and air tunes at the same time?

Hi,
I'd like to use and airport express to create a wirelss network (and so use the internet) AND stream music to my stereo with air tunes - at the same time. Is this possible? So far, I have been able to create a wireless network (and use the internet) OR use the airport express to play music. But whenever my internet works, itune can't find the base station - claiming it "can't be found on the network?"
Can you do both at once?
I'm connecting to an ethernet jack (I'm at a college). It's not a cable modem or DSL. Is this the problem?
Under "music" in the utility configuration. I've selected "Enable Air tunes at the base station." I can't select "Enable Airtunes over ethernet port." When i try to change the network options to allow me to select this "ethernet port" option, I have to tell it how to "distribute IP" addresses. i don't know how to do this, and everything I've tried destroys my internet connection.
I appreciat any help you have to offer. thanks
1.5 GHz PowerPC G4, 12'' powerbook Mac OS X (10.4.4)

solution:
My problem ended up being specific to the network I'm using. There is evidently another router on the ethernet system that was assigning my airport express an IP address (192. ...), rather than letting the network DCHP give me a direct IP address (something like 160. ...). The 192 address made it impossible for iTunes to see my express base station, but I was getting internet, passed through this other router.
The fix - and I'm not sure if this is totally kosher - was to manually enter a correct IP address for my base station. I got the IP address by seeing what this other router was sending my computer to get onto the internet. It gave me the correct router and a workable (160. ...) IP address. I'm not sure if I'm supposed to manually pick an IP address on the ethernet, but this one is working for the time being, and now iTunes can find my base station.

Brand new macbook air wont power up first time

Just got my first Mac ever - Macbook Air 13.3. It's been plugged in & charging for almost 4 hours. Upon first plug-in, the light was green for maybe 2 to 3 seconds - then went amber. No matter how many different outlets I used - same result. I figured the unit needed to charge but it's been almost 4 hours and I'm anxious. The light stays amber I just spent 1400 bucks on a unit that I though would start up/be charged or at the very least somewhat charged upon opening. Even my cheapo $750 Dell started up immediately out of the box.
I've tried 4 different outlets - same results (green to amber). Tried with and without the AC adapter - same results (green to amber) - currently it is hooked up with the AC adapter. It just wont start.
Are my expectations too high? I've had this for less than 6 hours and I'm curious if I'm wasting my time continuing to wait. NO where does it say "You will need to charge your new laptop for such and such hours" or "Your new laptop will not come charged" or "Your new laptop - when plugged in for the first time - will go from green to amber within a few seconds - this is normal." Just shows me a pic of the parts with no further information. The instructions are so minimal, but that was okay - I figured I'd get all I needed once I booted up. But it won't boot up! <laughing!>
Please help.

The light changing from green to amber just indicates that it is charging. Tap the power button in the top right of the keyboard one time. If it still doesn't power up, try this procedure.
http://support.apple.com/kb/HT3964

I want to snooze an event for a different length of time than the default. How do I select a different snooze length?

I just upgraded to Mountain Lion and I can't see how to snooze an event alert for other than the preset 15 minutes. How do I snooze events and other alerts for different lengths of time than the default? Sometimes I want to snooze an event until the start time or maybe for a whole day.

SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
More information:
http://on-core.com/snoozemaster/

Using Automator to 'rewind' Mac to very first Time Machine date

Is it possible to create an Automator workflow that would restore a Mac to its very first Time Machine snapshot?

Navarro Parker - wrote:
Is it possible to create an Automator workflow that would restore a Mac to its very first Time Machine snapshot?
If that backup is still on your Time Machine drive, all you have to do is restore your entire system, selecting that backup. See #14 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
If that backup has been deleted, no.
Just what are you trying to accomplish, and why?

I want to use LV embedded for ARM7 LPC2119, what first i want to do,and how to do it?

i want to port labview program to my target LPC2100,such as LPC2119.But i do not know what i should do first,and how to do it? second,third.......please give me some help.

The LPC2119 and LPC2103 processors full under the Tier 2 category of supported devices. Keil's uVision toolchain does support these targets (you can confirm that from this list, http://www.keil.com/dd/) but there is some additional porting steps that need to be taken in order to program these devices using the LabVIEW Embedded for ARM module.
The steps you need to take are explained starting on this document,
LabVIEW Embedded for ARM Porting Guide - Chapter 1: Introduction
http://www.ni.com/white-paper/6994/en
And continues for a total of 5 chapters. Please note, this is not a short process and the process is even longer if you are not familiar with microprocess programming and software development.
Tim A.
National Instruments

Want to use email alias (forwarded) as the reply email instead of the default email Using Outlook 2007 with Google apps

I have one main email address using Google apps and 3 alias email addresses within the same domain (I believe Google calls these accounts group accounts). I would like my replies to appear to come from the alias whenever an email is received through
it. Is there a setting to do this automatically. Currently I use 3 separate accounts on Outlook where everything is filled as if the alias account is a real account except for the username and password - where I fill it out with my real email login info.
I then had to disable these 3 accounts from the RECEIVE group (under send/receive) and make sure I use the "account" drop down when I'm replying and pick the correct the email alias. The problem is that I usually forget to pick one or pick
the wrong one. If there a setting that would do this automatically it would be a life saver and probably a job saver too :-). I would even take an Outlook Addin...if there is such a thing.

Diane:
This worked perfectly for me, I tend to read most of my mail on the default reading pane (as opposed to opening the email completely -which doesn't work). I Actually created three different Macros for REPLY, REPLY ALL, and FORWARD and replaced the
buttons on the ribbon so I wouldn't click them by mistake. The only change (besides the obvious changes) I added a line "strRecip = LCase(strRecip)" because I noticed the Macro would not work correctly if the person used uppercase when typing the email
address...for example if they typed it as [email protected] it would work fine but if they typed it as [email protected] or [email protected] or even the domain itself it would NOT work. With this addition everything works! I'll post this on the
bottom of the macro link too...I would have typed it there directly but you probably don't visit that page very often and I wanted to make sure you got my response.
Fabio

I want to use acces point air sap1602i e k9 first times i need default ip adress

Similar Messages

Maybe you are looking for