I want to use an old Daqcard 1200 with Labview 8.5. Where is the driver?

I'm using Labview 8.5. I have an old Daqcard 1200 and there doesn't seem to be a driver for it. I downloaded an older version of NI-DAQ that claimed to have support for that card, but when I tried to install it wanted me to uninstall my newer version. Is there a way to use this card without going back to an ancient version of NI-DAQ?

Unless there is some specific technical problem with interfacing to the old equipment, I don't think it is unreasonable at all to expect them to include drivers for legacy equipment. It would cost them very little to throw a few extra drivers into a package that encompasses their whole product line anyway, other than the missed opportunity costs associated with not selling new equipment in a few rare cases (which is probably what this is really about) .
NI will probably explain better than i do. in general, they changed the way the DAQ driver operates, introducing also DAQmx. this is incompatible with the old way of functionning. for you, it forces you to choose the driver version to use.
But anyway, it's not worth it for me to set up a machine just to run this thing. I'm just going to trash it. Thanks for the help.
why dont you sell it over ebay? there are quite a bit that would love using it, for cheap enough. for example, this was one of the latest cards exhibiting 3 counters, operating differently than the modern version. it has its usefullness...Also, if this is the only one card installed in the computer, you wont miss anything with the new drivers
... And here's where I keep assorted lengths of wires...

Similar Messages

  • I want to use an old iphone as an itouch and don't have the sim card anymore and I just updated to the new software

    I want to use an old iphone as an itouch and don't have the sim card anymore (cut it to fit into 4G) and I just updated to the new software.... How do I reload the phone with apps and music?

    You'll need to get a SIM card. It can be an old one.

  • I need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?  i use OS X

    i need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?

    With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
    Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
    So just go thru the motions of creating a proper printer instance:
    Make sure the Mac "sees" the printer on the network.
    System Preferences / Print & Scan
    Click on the + button on the left column
    Select the appropriate type of printer, will use IP for the rest of this
    Select HP Jetdirect - Socket, default for HP network printers
    Type the IP address or look it up
    Name the printer for easy identification on the print dialog
    Let the Mac identify the printer model or manually choose the driver
    Click Add.
    Once the instance pops up in the list, can click on Options & Supplies for further config.

  • I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

    I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me.  So I would like to have different programs, songs, apps etc for each phone.  What is the easiest way to do that

    Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

  • Can I use a DAQ PCI-1200 with Labview 5.0.1?

    I have a Labview 5.0.1 software, and I want to use PCI-1200 with it. Can I do that? My OS is Windows XP, but I can change it with Windows98/2000.

    Hello jhylee,
    The latest NI-DAQ driver for the PCI-1200 is 6.9.3, which is compatible with LabVIEW 5.0.1. LabVIEW 5.0.1 supports Windows 2000, but not Windows XP (although it may still run).
    Have a nice day!
    Robert M
    Applications Engineer
    National Instruments
    Robert Mortensen
    Software Engineer
    National Instruments

  • I want to use my old iTunes acct  with my new iPhone. It is coming up with a different iTunes acct  how can I get the correct account.?

    How do I get my old iTunes acct. on my new iPhone 5?  I am getting someone else's account coming up associated with my new iCloud account.  It is because I temporarily used a friend's old iPhone while waiting for my new phone to arrive.  What do I do to fix this?

    Here is a link to email them.
    http://www.apple.com/support/itunes/contact.html?form=authorization&topic=Author ization&subtopic=Authorize%20or%20deauthorize%20your%20computer

  • I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

    I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
    the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

  • TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

    I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
    As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

    Hi maddogdne,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Using an iPhone without a wireless service plan
    http://support.apple.com/kb/ht3406
    Cheers,
    - Judy

  • I want to use my old email address that has my previous purchases of application its just that i cant remember my old password i tried to reset my password but the says email address or ou guys dont sens me the email on how to reset my password...HELP

    Currently using a new apple id its just that i want to use my old apple id because of the apps that i purchased before i was trying to recover my apple od using my email address but it always says it was sent but i'm not able to receive any emails at all.using security question i dont know why it wont accept my birthday and all please help

    Conatct AppleCare Account Security. Contact numbers here:
    http://support.apple.com/kb/HT5699?viewlocale=en_US

  • I want to use my old iPhone 3GS as an Ipod. Nothing is working?

    I'm tired of wasting battery on my iPhone 4 to listen to music, so I wanted to use my old iPhone 3GS as an iPod. I read you had to have a sim card inserted in the phone, regardless if it's activated. So I put the old one inside, but when I connect it to my computer, it won't charge, or sync with iTunes. It's definitely not my charger because both of my phones charge in a wall outlet, and my iPhone 4 charges through the computer. Just not the iPhone 3GS.... I'm going on vacations with long car rides and would like to use this. Help please!

    kaaitlyyn_xo wrote:
    I tried factory resetting, and it get's to the screen wit the usb cord and the itunes logo, but still nothing recognized on my computer. But when i plug it into the wall... works just fine..
    If you can't update or restore your iOS device

  • I want to use my old iphone for my kids as an ipod.  How do I keep from getting text messages on it when it is turned on?  If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think

    I want to use my old iphone for my kids as an ipod.  How do I keep from getting text messages on it when it is turned on?  If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think it's a 4.  Thanks

    Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
    It would depend however on the age of the child.
    Good Luck

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

    I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
    Thanks!

    You can't really do it in any normal way; that is, using the MacBook's video output port.
    You can use this program
    http://www.screenrecycler.com/home.html
    to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
    How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
    http://www.jinx.de/JollysFastVNC.html
    (there are free VNC clients for 10.3 and earlier)
    However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

  • Just upgraded to a 6. I want to use my old 4S as an iPod touch. Is there a way to disable the phone and only have wi-fi?

    Just upgraded to a 6. I want to use my old 4S as an iPod touch. Is there a way to disable the phone and only have wi-fi?

    Did you transfer the telephone number from the old phone to the new phone?  If you did, I don't see how you could still have cellular service, even if you turned it off in settings.

  • HT5625 I want to use an old password that I have used in the past can I do that?

    I want to use an old passowrd that I have used in the past. I am 70 years old and I can't remember all the passwords I need for all the different apps, programs, etc. some need caps some need numbers. I want to use a simple password and keep it no matter what.

    Hi, that can be dangerous these days.
    Doesn't Keychain store these assorted Passwords for you?
    I haven't used it, but many rave about this App...
    https://agilebits.com/onepassword

Maybe you are looking for

  • Print Check box in smartform standard output

    Hi All, My requirement is to print a checkbox in the smartform output page. Somehow i came to know that in Web properties of the text node , we can choose a checkbox. But i am not able to figure out how it is to be implemented or what are the steps t

  • RequestInterceptor for Tomcat 5.5 server.xml ?

    Hello, Tomcat 3X server.xml has RequestInterceptor element for preventing classloader. What is the equivalent for tomcat 4X, 5X? and Where to add this equivalent ? I am using Tomcat5.5 and I encountered error in my servlet Naming class. It was said i

  • System Update Problems - Windows XP 64bit with SP2

    Hi, I have been Googling away but can't seem to fix my error when running System Update 3.14 on Windows XP 64bit with SP2. I keep getting the following error at 9-10%: "An error occurred while gathering user information" Has anyone managed to get thi

  • My iphone 5 screen does not respond to touch at all

    I don't know what has happened to my phone.  The screen does not allow me to even swipe to unlock it.  It has lines all the way up the screen of different colours.  There is no cracks in the screen or anything like that and I dont recall dropping the

  • Get playback error when try to watch amazon prime movies on ipad

    Trying to watch amazon prime movies on my ipad, have instant movies app but keep getting playback error. What am I doing wrong?