I want to use f9 to insert

This should be easy, but I can't seem to find the location to change the settings.
Currently, when I hit the f9 key, OS Tiger shows me windows of all active apps. I want to go back to the f9 key allowing me to insert a clip from the viewer onto the timeline in FCP (and I also want the f10 key to overwrite--and so on).
How do I change the setting?
Thanks.
Mac Book Pro   Mac OS X (10.4.8)   2.16 GHz

Exposé, like the upcoming mutli-session views in OS10.5, is a feature you don't know you want until you convince yourself to start using it a few times. I think most of us video geeks are pretty set in our ways. But if you've got FCP, LT, Motion, Aperture, STP, DVDSP and Safari running, Exposé can make navigation and cutting and pasting between apps fun and efficient.
But, yar, it's weirdly disconcerting to have the screen suddenly do that.
bogiesan

Similar Messages

  • IPhone 3S was used with Bell, then unlocked to use with Rogers. Now I want to use it as iPod (Don't want to activate as phone),but when connecting to iTunes I'm getting message:  There is no SIM card, disconnect and insert new SIM card. Help?

    I have an old iPhone 3S, that was used with Bell. My friend lost her phone and I lend her this one, which she unlock to use with Rogers. I got it back and want to use as an iPod not the phone, but when I connected to iTunes I am getting this message: "There is no SIM card installed in the iPhone you are attempting to activate. Please diconnect and insert a SIM card".
    I went to Bell and Rogers where we tried inserting active cards but message never changed.
    On the phone itself I am able to get wifi but finish with "Your phone could not be activated because the activation server is temporary anavailable."
    I run diagnostic from iTunes:everything is working properly, only message out of normal is "iTunes is not running in safe mode"
    How can I sinc this phone with iTunes, so I can use it to lisen to music?
    Any help will be apriacieted

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

  • In Captivate 8, how do I insert a text animation. It is grey scale and therefore can't be selected. I also want to use a "typing" effect.

    In Captivate 8, how do I insert a text animation. It is grey scale and therefore can't be selected. I want to use animation and also want to use a "typing" effect.

    Hi there
    What is your project type? Responsive? If so, that's why animation is disabled. Animations are usually built in Flash and Responsive output doesn't "do" Flash.
    Cheers... Rick

  • I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work

    Hi,
    I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work
    (fault number -2147217900)
    I want to search for a value in a ms access table , if it exist i want to update it, if not i want to insert a new row.
    Working with LabView 7.1, database con. toolset.
    Who can HELP?
    Thanks a lot
    Marco

    Hello,
    I think that If exist is not a standar SQL command (I know it exists I think in Oracle and SQL server), MS access doesn't support it, so I think the best way to do it is first make a Select and then either an Update or an insert, sorry...
    Paulo

  • Im staying in SA and wants to use a 3G HSPA USB stick to get 3G on the go.  The moment I insert my stick in the slot it says: "unexpected error".  Is this 3G stick compatible with Apple MacAir

    Im staying in South Africa and wants to use a 3G HSPA USB stick to get 3G internet on the go.  I have put the stick into my USB port, but get an msg " UNEXPECTED ERROR, PLEASE RESTART.  Every time I press restart the same happens again. 
    Is this stick compatible with Apple Macbook Air.

    You need to look up the specifications of the device.

  • I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

    Hi,
    When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How  do you want to use this disc', although the DVD was full of data. When opening these 
    lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD  opened well without any problems at all.
    Also, how can the System show to me 'How  do you want to use this disc' , in particular when  a DVD is non rewritable(DVD-R) and also contains data)?
    Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
    However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting  blank lightscribe discs I found that the disc were opened.  Also,
    non lightscribe discs were opened well.
    When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
    Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe  discs are unregonised
    Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
    I have done:
    Press the Windows logo key+R to open the Run dialog box.
    Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
    When you are prompted to confirm that you want to remove the device, click OK.
    Restart the computer.
    But the same prolbem is existing.
    yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
      mount ISO disc images into it, and not physical discs.
    Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
    NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there  a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
    the second is recognised. 
    Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of  what virutal CloneDrive is enabled or disabled.
    But when cliced on my problem didn't solve,
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
    which is always thrown in dust without caring at all. Also, its battery is
    always inserted even when it is fully charged while the laptop is plugged in to
    the main power supply.
    However, my laptop is either used on only battery, or on plugin. Also, it is
    kept from the dust.
    But, I really found that the battery of the Dell laptop
    still lasts about three and half hours, and there is no problem cooling fan is
    not oproperly preporly.
    I only remember one thing differently done on my laptop battery which is I
    charged it fully, then I stored it without using it for about four months, then
    when I reused it, I found it got worse over time. I.e. first time of using it
    after storing,I found it empty, then I charged it again fully, however, then it
    lasted about 2 hours, then 1 and half hours, next an hour, now it is only
    lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR Data
    CD/DVD-R LightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive
    'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
    is grayed out)
    Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
    read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
    NOTE: with CD/DVD Player is grayed out)
    Used CD/DVD±R/RW Non-LightScribe disc opens normal:
    Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
    With a CD,DVD)::
    My HP CD/DVD DVD±R/RW specis are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data
    diagnostic utility
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir
    C:\Program Files (x86)\Common
    Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir
    C:\Program Files (x86)\Common
    Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand
    http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion
    1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion
    1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type
    16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start
    2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
    0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
    LightScribeService Direct Disc Labeling
    Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
    LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description
    Used by the LightScribe software components to support 3rd party disc labeling
    applications using the LightScribe COM Application Programming Interface
    (LSCAPI). This service needs to run for LightScribe direct disc labeling to
    work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
    7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
    IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
    SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Winlogon\allocatecdroms
    0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel
    Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
    Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk
    /r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software which
    came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical
    drive, on a Dell optical drive, and all of them were opened well, although Dell
    optical drive did not have a lightscribe feature at all., nor third party disc
    recording software
    However, the problem is still with opening the discs LIGHT-SCRIBE
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with
    another one.
    I think there something needed to be done on the BIOS Of my HP
    laptop[[[A similar problems happened on my Desktop computer's optical
    drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
    My Desktop Computer) ---while my optical drive of my desktop was connected to
    the primary slave IDE, and the HDD was connected to the
    primary master IDE, the optical drive and hard disk are functioning
    well. However, I remember that while burning an image with Nero essential V: 5,
    something went wrong, and then the Optical Drive of My Desktop Computer
    (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
    BIOS, although it was still shown on the device manager as a
    recognised device. Also, it was listed on my computer, however, when entering a
    disc(blank or with data) into the drive, I found it was not recognised, and it
    opened empty(no files at it), although it contains data. Thus, I decided to boot
    to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
    still shown as installed on BIOS. However, the optical drive was not. Th I tried
    clicking on it on BIOS and then clicking on 'enter' to try to let the device be
    re-recognized. However, that made no difference. I had to take part my computer
    ,and then reconnected the optical drive onto the secondary slave
    IDE , and let HDD connected to the same primary master IDE.
    Then, I found that the problem solved and all discs became being read
    normally. Aslo, optical drive became installed on BIOS]]]
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

  • How can I use multiple row insert or update into DB in JSP?

    Hi all,
    pls help for my question.
    "How can I use multiple rows insert or update into DB in JSP?"
    I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
    With thanks,

    That isn't true. Different SQL databases have
    different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
    I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
    and there are also a lot of different ways of talking to
    SQL databases that are possible in JSP, from using
    plain old java.sql.* in scriptlets to using the
    jstlsql taglib. I've done maintenance on both, and
    they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
    Well, sure. As long as you only want to update rows
    with the same value in column 2. I had the impression
    he wanted to update a whole table. If he only meant
    update all rows with the same value in a given column
    with the same value, that's trivial. All updates do
    that. But as far as I know there's know way to update
    more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
    Unless you're using MySQL, for instance. I only have
    experience with MySQL and M$ SQL Server, so I don't
    know what PostgreSQL, Oracle, Sybase, DB2 and all the
    rest are capable of, but I know for sure that MySQL
    can insert multiple rows while SQL Server can't (or at
    least I've never seen the syntax for doing it if it
    does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
    Don't assume that all SQL databases are the same.
    They're not, and it can really screw you up badly if
    you assume you can deploy a project you've developed
    with one database in an environment where you have to
    use a different one. Even different versions of the
    same database can have huge differences. I recommend
    you get a copy of the O'Reilly book, SQL in a
    Nutshell. It covers the most common DBMSes and does a
    good job of pointing out the differences.Yes, I understand that.
    It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
    I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
    The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

  • Wanting to use multiple transitions on 1 slideshow?

    I want to make a slideshow for graduation party. This will be played continuously. I want to incorporate different transitions on one. I've read that you can to do it if you use slideshow from iphoto. I can not seem to get past the files when I click on media, photo. Slideshows don't show up. This is my first attempt with wanting to use multiple transitions. I've made DVD's with chapters. Plus, I never have used it as continues play. Any help and ideas would be a welcome.
    Thank you,
    Lisa

    In iPhoto, put your photos into an album. Then, open your album to display the photos that you put in it. Select all the photos. At the bottom of the album display window, there will be an icon called Slideshow. Click on it, and the photos that you selected will be placed into a slide show with a separate icon in the display panel. In the slideshow transition settings, select Random. That will play the available transitions at random.
    If you want more flexibility than iPhoto's "Random" setting will give you, you will need to create your slide show in iMovie where you can manually insert any of iMovie's transitions. Then drag your iMovie project icon (the one with the star on it) into the window of your iDVD project.

  • I want to use my old iPhone 3GS as an Ipod. Nothing is working?

    I'm tired of wasting battery on my iPhone 4 to listen to music, so I wanted to use my old iPhone 3GS as an iPod. I read you had to have a sim card inserted in the phone, regardless if it's activated. So I put the old one inside, but when I connect it to my computer, it won't charge, or sync with iTunes. It's definitely not my charger because both of my phones charge in a wall outlet, and my iPhone 4 charges through the computer. Just not the iPhone 3GS.... I'm going on vacations with long car rides and would like to use this. Help please!

    kaaitlyyn_xo wrote:
    I tried factory resetting, and it get's to the screen wit the usb cord and the itunes logo, but still nothing recognized on my computer. But when i plug it into the wall... works just fine..
    If you can't update or restore your iOS device

  • Using SQL DML INSERT how can I put a ref atrib with out a select

    What i am trying to do is use the insert statment to insert into a object table that has an atribute that is scope to another table as a REF of that type.
    something like this:
    INSERT INTO TABLE_AAA (NAME, SOMETHING) VALUES ('AAA','BBB');
    SELECT REF(P),P.NAME FROM TABLE_AAA WHERE P.NAME='AAA';
    IT GIVES ME THE REF THAT ARE 85 NUMBER AND LETTERS AND THE NAME=AAA
    SO WITH THIS INFORMATION I COPY THE REF AND PUT IT IN TABLE_BBB AS:
    INSERT INTO TABLE_BBB (REF_TYPE_AAA, SOMETHING)
    VALUES(1234567890123456789012345678901234567890123456789012345678901234567890123456789012345,'QQQ');
    THIS IS NOT WORKING I TRY DIFERENT THINGS, BUT NOTHING WORKS
    WHAT I DONT WANT IS TO USE THE SELECT IN THE INSERT, I JUST WANT TO PUT THE VALUE OF THE REF IN THE INSERT.
    WHAT FUNTION DO I NEED TO CAST OR CONVERT TO A REF DOES NUMBERS AND LETTERS THAT I HAVE, THAT I CAN USE A SIMPLE INSERT COMMAND.
    THANK IN ADVANCE FOR YOUR KIND

    Hi,
    Could you give structures of objects (tables/type objects)?
    It may help to clarify your doubt.
    Regards,
    Sailaja

  • How do I create a header in the response table for a column I want to use that is not on the form it

    Example: My form has 10 fillable questions.  The Response table uses 10 columns to show the answers to those questions.  I would like to use 3 more columns to record internal information.  How do I insert the header titles?

    Hi,
    You can go to Responses view tab, focus on your last column header and then click menu Table->Add Column After. Or you click + button at the end of table - refer below image.
    I am not clear your question "How do I insert the header titles?" Do you mean you want to use your form title as data value in each cell in the column? If yes, you can set formula in the column following below steps.
    1. Click +Add a Row button
    2. Focus on the cell on column L (I assume you want to set your formular on this column).
    3. Input ="your form title" into the cell
    Then after you received a submission, the form title would display in the related cell in each row.
    Hope it will help you.
    Thanks,
    Ying

  • Acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date

    acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date.
    Has anybody else seen this problem? Is there a fix?
    I wanted to download the demo of acrobat XI but it says the previous version will be removed and deactivate the license. That sucks!

    Yes it is up to date.
    I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten.

  • How use SDK to insert text in indesign using c++

    Hello All
    I want to  use Indesign CS5.5 SDK  in my  c++ project first to create Indesign Document then insert text in textframe.
    How include SDK in my project ?
    Is it right method to create indesign Application using SDK.
    #include "IApplication.h"
    #include "ISession.h"
    # include "IDocumentCommands.h"
    virtual IApplication *  QueryApplication()=0 ;
    ISession *  GetExecutionContextSession();
    IApplication application(GetExecutionContextSession()->QueryApplication());
    It required so many .h file, first I copy .h file from SDK and put in Project directory but it give some error after including these .h file in project.
    There are so many directory(source,build,docs, etc.) in SDK.How include and use this SDK in my project to create Indesign Document.
    How include so many  .h file in my project ?
    I have already included SDK path in VisualStudio2008 ->Tools->Option->ProjectSolutions->vc++Directories
    Thanks.

    Hi Jongware,
    This is not correct in C# you have type cast all the object to another Object and then only we can access it in required format
    for example
    if want to get font in active Document
    InDesign.Application myInDesign=  (InDesign.Application) COMCreateObject("InDesign.Application");
    InDesign myDocument = (InDesign.Document)myInDesign.ActiveDocument;
    InDesign.ParagraphStyles pStyles = (InDesign.ParagraphStyle)myDocument.ParagraphStyles
    InDesign.ParagraphStyle pSteyls = (InDesign.ParagraphStyle)myDocument.ParagraphStyle
    for(int i =0;i<pStyles.Count;i++)
         pStyle = (InDesign.ParagraphStyle)myDocument.ParagraphStyles[i];
    public static object COMCreateObject (string sProgID)
        // We get the type using just the ProgID
        Type oType = Type.GetTypeFromProgID (sProgID);
        if (oType != null)
            return Activator.CreateInstance( oType);
        return null;
    like above content
    for selection content u have to type cast selection object.
    InDesign.Selection = (InDesign.Selection).myDocument.Selection;
    Console.Writeline(InDesign.Selection.Contents);
    but it showing error....
    like this you have to type cast all things in C# and you cannot simply get selection contents like app.selection[0].contents
    pls help me
    Thank you for your reply....
    R. Thangaraj

  • How to Unlock my iphone5 Sprint? I want to use China Unicom USIM card

    SN:F17JLKW3F8GH
    Need your Help!

    Don't post information such as this on a public user forum.  This is a public user to user forum for technical questions so nobody here will be able to help you and you are NOT addressing Apple here.  If you want help, then you'll need to contact Sprint.  They are the only ones that can help you.
    However, Sprint is what is known as a cdma carrier and if their phones are like Verizon, then it is not locked.  From the iPhone 4s version it was required that any cdma phone with a sim card portion for gsm use should be unlocked out of the box and this is the same for Verizon, which is the other cdma carrier.  The sim card tray should be unlocked already, so get a key and open the sim card tray and insert and local sim card in the phone and it should detect a network in China and you can use the phone.
    Other than this, if the phone is not unlocked, then you are out of luck and you won't be able to use it.  You would need to contact Sprint directly to get the sim portion of the phone unlocked for use with the gsm network in China.
    If you can't do this, then your only other alternative is to purchase a phone in China that you can use and will work with the Chinese networks.
    Think before you buy next time and check that the phone is compatible and will work where you want to use it.
    Other than this, then contact Sprint directly to see if they will unock it if it is in fact locked or buy a new phone.

  • Hyperlink Destinations (IDCS3) - created in one document, want to use in another

    I've created a number of hyperlink destinations that I want to use in several already existing document. Is there a way to copy or import them into my existing document or do I have to create them all over again in each one?

    Hi,
    According to your description, the issue occur when we set the hyperlink destination with cell range. For example: If we link to destination cell via Sheet2!A1, whatever we add/delete the rows/lines, the hyperlink won't changed, always shows the value of
     Sheet2!A1.
    Thus, if we want to update the destination values after we add/delete the rows/lines, we might define the name of the cell. Please see the below image:
    Here is the steps:
    Select the cell/range of destination worksheet>Click formula> Define name>Add the name which you want.
    Select the origin cell>Insert tab>Hyperlink>Choose the define name
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
    Office programs.

Maybe you are looking for