I want to use filesharing between 3 macs in my network.

I have 3 Macs in my home network. The older iMac with mountain lion is available via Finder. With the newer iMac and MBP with Mavericks it's no possible to connect. Both worked perfect under Mountain Lion. Can this problem been caused by the firewall?

Sorry, perhaps I was not explicit enough.
Your code snippet: request.getHeader(MyUserName);
It was missing quotes to make it a String value.
If that is what you have, then it is using the VARIABLE MyUserName, and not the actual value "MyUserName"

Similar Messages

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

  • I have CS5 for my laptop and want to use it on my Mac too. Do I need to buy a separate license?

    I purchased CS5 for my laptop and now want to use it on my Mac book too. Do I need to buy a separate license?

    Serial numbers are platform specific. You cannot use a PC license on Mac and vice versa. You would need to run a platform swap to use it on a Mac and upgrade to CS6, but then would lose the PC license. Therefore you eitehr need to buy a separate license for the Mac or join Creative Cloud.
    Mylenium

  • I used to have iPod shuffle connect to PC, I now want to use it on my Mac - how can I now assign iPod to Mac

    I used to have iPod shuffle connected to a PC, I now want to use it on my Mac - I cannot get iTunes to see the shuffle at all - trid the 5 sec fix - no go.  How can I now assign iPod to Mac?

    You can do a platform swap
    Order product | Platform, language swap

  • How to use thunderbolt between two mac

    how to use thunderbolt between two mac? i would like to transfert files to my macbook air ...Thanks

    You can use target disc mode:
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/8443.html

  • I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect a separate hard drive?

    I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect it to a separate hard drive?

    The Time Capsule is by default a network hard drive, but it has no "brains" of it's own. So, it cannot function as a stand alone media server if that is what you are asking.
    If you are also using the Time Capsule hard drive for Time Machine backups of your Mac(s), then there may be struggle for available space on the drive since it is not possible to partition the Time Capsule drive in a traditional manner.
    If space is getting tight on the Time Capsule, it might be a good idea to connect a drive to the USB port on the Time Capsule and use that drive for your network storage needs.

  • Downloaded Photoshop Elements 12 for Windows now want to use it on Apple Mac

    Does Adobe support customers who bought Photoshop Elements 12 for Windows and then buy an apple Mac and want to use it on there (without having to buy a new subscription).

    download and install,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I want to use Windows on my Mac, but Boot Camp doesn't work (Mac OS X 10.7.3)

    Everyone knows that w/ Boot Camp you can use Windows on Mac, but I can't.

    common issues:
    downloading the drivers with Boot Camp Assistant
    Not reading the guide from in Boot Camp Assistant
    Wanting to use XP (not supported)
    Not enough disk space
    Space is too fragmented - and people don't know or understand the error or how to even backup and then erase and restore (very basic part of prevention and use of computers).
    http://www.apple.com/support/bootcamp/
    Installation Guide  Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.

  • I want to  use iCloud  between iMac, iPhone and iPad

    I want to  use iCloud. When I change a document on my iPad or iPhone, the new document appears on the iPad and iPhone but not on my mac. Also when I change it on my mac it does´t appears on the others. It does´t work automatically with my mac. What´s wrong. Can you help me, please?

    On the iPad and iPhone tap Settings > iCloud
    Switch Documents & Data off then back on the reset the devices.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    On your iMac open System Preferences > iCloud
    Deelect the box next to Documents & Data then reselect it then restart your iMac.
    Hopefully everything will sync now.

  • I want to use Back to my Mac, but my iMac using wireless LAN will not wake from sleep

    I've read a ton of posts, and it seems that others have similar problems.
    Here are some details: I have a 2 year old iMac now running updated install of Yosemite. I have a brand new MBP running clean install of Yosemite.
    I have a 2 year old AirPort Extreme connecting my home wireless LAN. How can I get my MBP to connect to my iMac using Back to my Mac once the iMac has gone to sleep. Back to my Mac works if all computers are active.
    The appropriate energy saver selections have been made. Leaving the iMac awake is not an option.
    it just doesn't seem to work. No wake on wireless LAN?
    Help please

    Someone else may come along and have an idea, but as far as I know the iMac shuts off wifi when asleep so it can't be used to wake up the Mac. It has to be a wired connection.
    Leaving the iMac awake with the display off really doesn't use much energy so it might be worth considering.
    ~Lyssa

  • Is it possible to set up Time Capsule on one network and then access its stored data (movies) using Back to My Mac from another network that also has Apple TV to play them?

    I recently purchased a Time Capsule to store data at my office.  I have an Apple TV at my home that I would like to start using to play my movies.  With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV.  Does this sound possible?  We have an iMac at the office that remains on 24/7 connected to the TC.

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

  • Want to use my ipod for Mac @ home and PC @ work....

    I have a Mac at home and have my ipod set up for the Mac I guess. So I brought the ipod to work today to hook it up to itunes here on my PC, but itunes says only Windows formatted ipods can be used and that I have to do a restore on my ipod to use it.
    I thought you could use the ipod on multiple computers? I thought it didn't matter if it was set for Mac or PC because you could still use it on both.
    Any help? I want to connect my ipod at work so I can get the music on this computer. Thanks!!

    Windows computers cannot read the file format the iPods are in when they are formatted for Mac use. However, Macs can read the Fat32 file format that the iPods go in when they are formatted for Windows.
    To use the iPod with both computers, you'll have to first restore the iPod on your Windows computer (putting the iPod into Windows format).
    The only downside is if there is an iPod software update, you won't be able to install that to the iPod from the Mac, just from Windows computers.

  • Fileshare between my Mac Pro Quad Core Intel Xeon (64-bit) & Power Mac 9600

    I want to make my Power Macintosh 9600/233 (Mac OS 9) a shared computer with my Mac Pro Quad Core Intel Xeon (64-bit)(Mac OS 10.6.6). I am using a Netopia Model 3346N-VGx DSL Ethernet Managed Switch to network with my Samsung printer and the Mac Book Pro.
    I also have a Power PC G4 (Mac OS 10.5.8) connected (via a Ziplinq 48" Retractable Crossover Network Cable) to a Farallon EtherWave 10 Base-T AAUI Transceiver, which in turn is connected to the Netopia, from which I can share files. All of this is ethernet connectivity.
    I thought I could connect my 9600 using the same method as for the G4 or by connecting the ethernet cable from the 9600 directly into the Mac Pro Quad Core. However, neither of these methods work.
    An additional stumbling block is that I have not used this 9600 for several years and am not sure of its account name. I'm fairly certain of its password. But because I don't have a second monitor for this machine, I can't muddle my way in.
    My questions:
    1. What might be a network solution to this dilemma?
    2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
    3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
    Any suggestions greatly appreciated.

    Oh man, what a dilemma...
    1. What might be a network solution to this dilemma?
    Without a monitor on the 9600, almost none. At the very least you'll need to configure the server with appropriate network settings for your environment, and that can't be done headless.
    You might only need a display for long enough to setup the network, but you'll need one all the same.
    Once the network is configured your options are either AFP or FTP, but I'm not even sure the old version of AFP is supported anymore, which means you may need to fire up an FTP client on the 9600 and push the files to your MacPro.
    2. Or, do I need to get another monitor for this computer and leave it un-networked and just transfer files manually?
    As mentioned above, you're going to need a monitor at the very least to configure the network settings. I'd be inclined to say at that point you might as well copy the files off any way you can and put the 9600 to rest. If you're really, really fortunate and the 9600 has a CD burner I'd probably use that and count myself lucky
    3. Or, would whatever hard drives are in the 9600 be transferable into the networked G4 or the main Mac Pro? (not sure what they are.)
    The 9600 shipped with SCSI drives, which no current Mac support (at least without a SCSI card), so there's no way to remove the drive from the 9600 and attach it directly to the MacPro.

  • I used ipod between a Mac and a PC - oops

    I have been using my 5th gen video iPod (firmware 1.3) with my PC running XP and iTunes 7.2.6.9. Recently I purchased a Macbook and wanted to load my tunes onto it, so I plugged in my iPod and transferred purchases. For several weeks I was able to do this with no problem. I manually managed the songs on the Mac while using my PC as my primary (synching) computer for the iPod. But now suddenly my iPod will not sync with the PC. It has given me a variety of boo-boo boxes as I've tried to correct it by restoring and updating and such. Diagnostics say the connection is fine and the device is working properly. But basically it's saying it can no longer write to the iPod disk. Is there anything else I can do?

    Understandable. I was suggesting that to see if it's an issue with the iPod or with your PC. In your post when you said that you attempted to fix the issue via restore, did the restore complete successfully or did you receive an error message?
    Try the steps in this article:
    http://support.apple.com/kb/HT1207
    CG

  • Creative cloud member currently working on PC but want to use iet now on MAC what must i DO

    I bought  a MAC but i am working currently on a pc.
    What must I do to also use my adobe programs on my MAC?
    THANKS
    LESLEY

    Download and install the Mac version on the Mac.  You are allowed to have two working installations, and they can be mixed platforms for a Cloud subscription.
    Creative Cloud Help / Install, update, or uninstall apps
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    Installing Creative Cloud Apps
    http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Maybe you are looking for