I want to use finger print on HP Probook 450 G1 .. Windows 8.1 Pro

Please help me i just Bought HP probook 450 g1 .. and i installed the validity fingerprint sensor succesfully but i don't know how to use the finger print or where i can find it .. i downloaded simplepass .. tha black virsion and i couldn't understand any thing .. and l keeps telling me '' Simplepass can use your windows pass word to log on'' and whenever i write it  .. the program tells me  .. the password you enterd doesn't match .. and i tried to install HP Client Security Manager .. i keep telling me that ERROR 1001 .. i i want to do is the use the fingerprint ... is that possible in that laptop .. i think i'm going to die

Amr-Zero,
No dying!
As far as I know, your computer is not going to run SimplePass -- it wants to run the HP Client Security Manager. 
There are some prerequisites as listed on the System Requirements page.  Amongst these: the File Sanitizer Software, both .NET framework 3.5 and 4.5, and others.  It is likely that your system has all the necessary software, although you may not have installed the File Sanitizer yet.  It is available from your computer's driver page.
If you do not yet have .NET Framework 4.5, you can download install .NET Framework 4.5.1:  Microsoft .NET Framework 4.5.1
It is of vital importance that you have all your Windows Updates in place.  Make sure they are indeed complete.  If you are one of the people in the world that do not believe in Windows Updates, turn them off later -- this is not the time.
HP ProBook 450 B1 Notebook Drivers - Windows 8.1
You need to remove and banish that SimplePass software from the system.
Control Panel > icon view > Programs and Features > find and remove the SimplePass software
Next:
Create a Restore Point   Create a Restore Point – Win7  OR  Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Reminder:  Hard Reset is just a device Reset.  The Hard Reset procedure does not wipe out your files nor does it destroy your Windows setup in any way.  It just "clears the cobwebs".  Depending on the cause of the problem, this kind of "reset" can fix a variety of computer glitches.
==========================================================================
Unfortunately, this is the extent of my knowledge on the subject.  You have a "business" computer and this is "business" software.  I perfectly understand that YOU might be just someone sitting in your house somewhere on the planet -- it is the COMPUTER and the SOFTWARE that is the difference here. 
There is a White Paper on the subject in your Manuals section -- it is useful if you have some background in the subject at all.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP. 
Kind Regards,
Dragon-Fur

Similar Messages

  • I want to use Apple print to print a square book - using Aperture.  How?

    I want to use Apple print to print a SQUARE format book - using Aperture.  How?

    I want to use Apple print to print a SQUARE format book - using Aperture.  How?
    Not with Aperture. You have to use the new Photos for Mac, if you want to print a square book with Apple's Print services.
    You could collect  the images you want in the book in an album, export the albums a s a new Aperture library, open the album Photos, and create your book.
    Or create a custom book in aperture, print the pages of the book to JPEG, import the jpegs to Photos and use them as full page photos to create a photo book in Photos.

  • I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

    I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
    Thanks!

    You can't really do it in any normal way; that is, using the MacBook's video output port.
    You can use this program
    http://www.screenrecycler.com/home.html
    to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
    How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
    http://www.jinx.de/JollysFastVNC.html
    (there are free VNC clients for 10.3 and earlier)
    However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

  • How to use FInger Printer Sensor with HP Probook 440 G2

    I have HP ProBook 440 G2 I am unable to set finger print sensor as the login to my device.  

    You need to install the HP client security Manager in order to configure and use the Fingerprint reader. Link: Your PC's download page does not list the software but the below link may work.Make sure to backup your data before proceedinghttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_141857_1#tab5Make sure to backup your data before proceeding

  • Want to use shared printer - driver question

    Unfortunately I don't have my Macbook Pro with me to try this. My wife is using it for her business trip.
    But I would like to install a shared Windows printer on the MBP. Will Leopard ask me for a driver?? If so, which driver is it asking me about? The Windows Imf file? The mac driver for the printer?

    You must use a printer driver for the Mac and a printer driver for the Windows machine. The driver must be for the printer that will be used. Printer sharing must be activated on the computer to which the printer is connected unless it is a network printer connected to a router.

  • HT1178 i can't connect the time capsule with my mac using the aiport utility. i want to use the time capsule to make backup for my mac book pro. the time capsule is giving a flashed amber light. please advice me

    the time capsule is giving flashed amber light and i cant connect it to my mac book pro. i want to use it with the time machine to make backup for my mac. please advice me.

    To do the setup, plug it in via ethernet.. do not try to setup over wireless.. Once it is setup you can plug the TC into the network and use wireless.
    Most likely you will use the TC in bridge to an existing modem router.. but we cannot help as you have no details of the network setup.
    I do recommend in the setup of the TC you use SMB type names.. that means, short, no spaces pure alphanumeric.. as later Mac OS do have issues with long names, spaces and that apple shocker, the apostrophe.

  • HP 1510 Series Printer-The Scaner not working in Windows 8.1 Pro N

    My OS is Windows 8.1 Pro N,Printer is working fine but Scaner has to big problem and not run,even if i had tried with Print and Scan Doctor but it was fail to splve issue..What i have to do?

    Hi,
    Please first check the versions of msmpeg2vdec.dll on your and your friend’s computer.
    Also, let me know if your install any Windows update or other video player which may change the version of msmpeg2vdec.dll. If so, please remove the video player temporally or restore back to the point system work fine.
    If the issue persists, let’s try to replace this file:
    To replace the dll file, we need to take ownership of this file and change it. Please make backup to avoid unexpected results.  
    Take ownership and replace system files:
    1. Take administrative ownership of the corrupted system file. To do this, at an elevated command prompt, copy and then paste (or type) the following command, and then press ENTER:
    takeown /f Path_And_File_Name
    Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type takeown /f C:\windows\system32\jscript.dll.
    2. Grant administrators full access to the corrupted system file. To do this, copy and paste (or type) the following command, and then press ENTER:
    icacls Path_And_File_Name /GRANT ADMINISTRATORS:F
    Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type icacls C:\windows\system32\jscript.dll /grant administrators:F.
    3. Replace the corrupted system file with a known good copy of the file. To do this, copy and paste (or type) the following command, and then press ENTER:
    Copy Source_File Destination
    Note The Source_File placeholder represents the path and file name of the known good copy of the file on your computer, and the Destination placeholder represents the path and file name of the corrupted file. For example,
    type copy E:\temp\jscript.dll C:\windows\system32\jscript.dll.
    Did your GraphEDT work fine now?
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Want to use dell printer on imac

    I have an A920 all in one Dell printer which I love and now have switched to mac. I just bought a new imac and am trying to add the printer but Dell is not listed as a printer and of course their website only has drivers for windows. What can I do? I dont want to get a new printer and I am not comfortable enough yet to get the boot camp or other software to run windows to use it.

    hey im having the exact same problem. did you ever find a way to get them to work?thanks!

  • WANT TO USE M1217 printer on fax server but modem driver could not find

    Dear All
    I want to install HP Laserjet M1217 MFP on Window Server 2012 r2 and Use on windows Fax and Scan utility.
    but i think i need modem driver to use on this utility.
    therefore i need assistance  how can i use this dvice on Fax server.
    best regards
    Owais Farooq

    Hello Owais Farooq,
    The Windows Fax and Scan allow faxing with a Fax modem card installed on your PC, it does not allow using a such with the HP Device.
    The HP M1217 allow sending and recieving faxes from the computer through the HP Software , not through the operating system software.
    Regardless, the M1217 is compatible with Windows Server 2003 or 2008, it is incompatible with Windows Server 2012, as well any digital fax capabilities as faxing from / to the computer are only supported on a client operating system, not on a server.
    For a server only basic print and scan drivers are available as you may find in the user guide of the printer:
    http://h10032.www1.hp.com/ctg/Manual/c01760651.pdf
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I want to use a printer's template with Photoshop to create a postcard.  How do I do this?

    I have used Photoshop to edit images for a number of years, but have not ever used it to embed images in pre-created print templates.  I would be grateful for any advice you have for me -- thanks!

    All templates are not created the same way.  How one populates a template depends on the template document. Some are stored as PSD file some as a PNG file. So some are layer and other not.  Image are added as layers using features like place, paste, duplicate layer from one document to an other. Image layers are re-sized using a layer transform and are often masked to the area being populated.  Mask are also used to blend in images to create interesting composites.

  • Want to use SCCM 2007 to image thinkpad 10 with windows 7

    Hello,
    can someone tell me if
    SCCM 2007 can be used to build the thinkpad 10 tablet and if it can
    can I deploy a windows 7 x64 image to it and it I can
    where are the drivers as I can only find windows 8 drivers.
    I have build a Helix successfully in the past with windows 7 but I cannot get the thinkpad to work, what am I missing?????
    thanks
    Nazir

    Perhaps this page from Microsoft will help understand which versions of SCCM can deploy which versions of OS:
    http://support.microsoft.com/kb/2909893/en-us
    As for the ThinkPad 10, I believe it only supports Windows 8.1 so there will be no Windows 7 SCCM driver pack for it.

  • I want to use fingerprint reader

    actually i want to use finger print reader i download the drivers but now hp securitytool protocol manger is missing and i want to download but couldnot find it please help me.....

    Hello @utopianshaNI ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, here is a link to your software  page. 
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Finger Print Scanner not coming in log on scrren

    I am using Probook 4540s 64 bit window 8.1
    i want to enable fingerprint scanner on login screen .
    I installed the driver , and also HP Protect Tool , i save my finger print also .
    Now when i reboot its give me finger print verification option , 
    but in login screen i need to insert computer pwd.
    but i only want to scan finger print for login .
    i already gone through this link ..
    HP Logon
    Can anyone help me on this .
    Thanks in advance . 

    Hello @Dilipaim11,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP ProBook 4540s Notebook PC is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    The support page for your product may be helpful in the meantime:
    HP ProBook 4540s Notebook PC.
    I hope this helps!
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • HT4113 Is there a way to lock your iPhone using figure print?

    Is there a way to use finger print to lock iPhone

    The reports on the BBC lie about how easy the hack is.
    http://www.tuaw.com/2013/09/23/fooling-touch-id-may-be-possible-but-calling-it-e asy-is-a-bol/
    Read this to see how simple that process is. It is orders of magnitude stronger then the passcode that is currently available on the other iPhones.

  • Finger Print Reader functionality on Tecra M5

    I own TECRA M5 which I bought one month ago. Today I restarted computer and tried to login using finger print reader, it does not worked, after 5, 6 attempts it read my finger but gave the msg, finger read is too short.
    I restarted computer again, same happened but after many tries it worked. Why it??s not reading my finger? Normally it does not happened and it read finger at first attempt but above mentioned problem I have faced 3 times.
    Any suggestions? Problem with brand new Tecra is irritating.

    Hi
    Check the version of your fingerprint software. On the Toshiba website it's version 5.4.0
    If your installed application is a little bit older so you should install the new one from the website.
    Furthermore please be sure that the lens of the fingerprint is clean and that the device scans properly.

Maybe you are looking for